Wacker wp 1550 aw gebraucht kaufen

Erkannter Standort: Ashburn (US) (anpassen)
Adresse angeben
oder
verschieben
5
70cthpzdwRuettelplatte Wacker WP1550W, Baujahr 2012, 4,2 PS Benzin Motor, mit Wassertank, Inv.Nr.273.6651.850 mehr
3
Schnittdurchmesser 340 mm Sägebandlänge 5270 mm Schnittbreite mm Schnittgeschwindigkeit 18-114 m/min Schnittbereich 340x340 mm Mehrfachnachschub 2080 mm Späneförderer Gesamtleistungsbedarf kW Maschinengewicht ca. t Qnnzldynx Raumbedarf ca. m mehr
6
Verwendungszweck: Bauwesen Leistung: 55 kW (75 PS) Motormarke: Deutz TCD 2,9 DOC Pteswu Leistung der zusätzlichen Hydraulik: 175 l/min mehr
6
Verwendungszweck: Bauwesen Leistung: 75 kW (102 PS) Motormarke: Deutz 4 cylinder Hochlöffel-/Schaufelstiellänge: 257 cm Transportabmessungen (L x B x H): 7.79x2.49x2.83 809crnddh mehr
6
Verwendungszweck: Bauwesen Leistung: 75 kW (102 PS) Motormarke: Deutz TCD2012-L04 0rkkq2s2 mehr
4
Metallbandsäge, Bandsäge-Maschine, Bandsägeautomat -Maschine hat Probleme mit der Steuerung und wird daher als Ersatzteilträger verkauft -hydraulische Materialspannung -Schnittbereich: -90° rund 420 mm -90° flach 420 x 420 mm -Material Vorschub mehrfach Hub -Automatische Materialerkennung -Schnittdruckregulierung hydr. stufenlos 2pwkxq -Abmessungen Maschine -Gewicht kg mehr
3
Bauhöhe: 2400 mm Hubhöhe: 12600 mm Antriebsart: Elektro Tragkraft: 460 kg Dtprqew8g Batterie: Unbekannt 6V 500Ah, Bemerkung: Ladeger?t integriert, Bauh?he durch Fahrerschutzdach: 2400 mm, Bandage, Blitzleuchte, 180?-Lenkung, Tischbreite: 1050 mm, Einzelhebel-Bedienung, Standh?he: 1250 mm, Greifh?he: 3250 mm, Plattform ausgezogen: 3750 mm, Schutzgitter: 1150 mm mehr
1
Max. Schnittdurchmesser 420 Max. quadratische 420 x 420 mm Max. Länge der feed 5-520 mm Sägeblatt 6280 x 38 x 1,3 mm Schneiden Geschwindigkeit m/min 16-105 Fqlfmwqx Max. Leistung 7,5 Kw ausgerüstet mit NC - Steuerung Kühlmittel Servicetools etc.. mehr
6
doppelte sah Motor 22 kW schneiden Höhe 330 mm Schnittlänge von 2,6 m bei der Hunde-Feeder Messerachse Durchmesser 700 mm mit Abstandhalter und Druck Platten Feeder Maschine perfekt geeignet für Faserholz, neue Spanner, neue Kette, neue Lager, neue elektrische, neue Feeder Maschine sicher mit aller Sicherheit-Maschine mit einem einfach zu bedienenden Design und Service-Unternehmen zusätzlich zum Preis von zwei neuen aufschlitzende Sägen bis 700 mm Schnittlänge mm 2600 mm Länge Maschinen mm 6100... mehr


wacker wp ...
täglich

Neue Maschinen per Mail!

Informiert werden!
6
Multi sah Lignum WP 500/250 -Die Maschine auf Lager -Generalüberholt -sehr guter Zustand Technische Parameter: -Jahr 2005 -Hauptmotor 22 kW -Vorschubmotor 0,75 kW -Vorschubgeschwindigkeit angepasst auf den Wechselrichter -Maximale Schnitthöhe 65 mm 3dt7npcah -Maximale Schnittbreite von 450 mm -Max. Sägeblatt-Durchmesser von 250 mm -Schaft Durchmesser 70 mm -Drei Wellen verlaufende untere -Drei obere Presswalzen -Zwei Reihen von Becher -Drei Rollen... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. 7cwjlupqz CULLMAN AUTOMATION End Trim Saw Feed trough -- End Trim Saw for counter tops. This saw will be placed in-line at the end of your existing counter top [...]: -- The saw carriage and guides will be mounted below the infeed table height and will be raised from under the counter top to cut from the nose position toward the backsplash. This saw will use your existing 16"" saw blade to cut across counter top widths of up to 60"" with a backsplash heigh... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Jtxoaa MIDWEST CS 5236 Countertop Saw ;For cutting off or mitering postformed tops. -- 5 HP - 3,400 RPM Main motor, 0.5 HP drive motor, variable feed speed from 0 - 45 FPM with 45 FPM fixed return speed. -- 16"" Blade dia. cap., 5-5/8"" depth of cut with build-down, 3/4"" max. build-down, and 4-7/8"" max. back splash height. -- 54"" Crosscut cap. at 90°, 50"" at 22-1/2°, 38"" cut at 45°, fixed miter positions for 90°, 45°, 22-1/2°. -- Equipped with: ... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Mlhjz NORFIELD 1020 Double-Sided Casing, Miter & Trim SawThe saw cuts side casing, head casing, brick mold and jamb stock. It quickly miters casing and brick mold, and square cuts stops or jamb stock at up to (30) pieces per minute. -- The feed system ensures steady feed rate and provides the additional benefit of operator safety. -- Double end cutting reduces labor cost and changeover from square to miter cuts, allowing quick and easy processing of comp... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Baiu0gajaa MIDWEST CS 5236 Countertop Saw with Laser Light; -- For cutting off or mitering postformed tops. -- 5 HP - 3,400 RPM Main motor, 0.5 HP drive motor, variable feed speed from 0 - 45 FPM with 45 FPM fixed return speed. -- 16"" Blade dia. cap., 5-5/8"" depth of cut with build-down, 3/4"" max. build-down, and 4-7/8"" max. back splash height. -- 54"" Crosscut cap. at 90°, 50"" at 22-1/2°, 38"" cut at 45°, fixed miter positions for 90°, 45°, ... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 9kyrfd7xi MIDWEST AUTOMATION CS-5230 Countertop Saw (w/Routers) In-feed / Out-feed and Laser for cutting off or mitering postformed and/or coved tops. 5 HP - 3,400 RPM Main motor, 0.5 HP carriage drive motor, variable feed speed from 0 - 45 FPM with 45 FPM fixed return speed. -- Equipped with: 16"" Blade dia. cap., 5-5/8"" depth of cut with build-up; 3/4"" max. build-down and 4-7/8"" max. back splash height. -- 42"" Crosscut cap. at 90°, 38"" at 22-1/2°,... mehr
1
Elect./Voltage: 400 V, 50 Hz, 3 Ph. Q87ud3feh KOCH FRONT 10 BORING MACH. (FEED THRU W/DRAWER FRONT GROOVING) -- Specifications:Drawer Front Machine with vertical through drilling units from both the TOP & BOTTOM; can be programmed to bore through the drawer front for attachment of handles & knobs or through the back for dowels & other connecting hardware. -- Working Dimensions254 - 900 mm (10"" - 35.4"") long x 120 - 300 mm (4.7"" - 11.8"") wide; 12 - 26 mm (1/2"" - 1"") panel thickness. ... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Uxsh98s0k KAWASAKI FS030L E Palletizing Robot. -- Articulating arm type Palletizing Robot. -- Suction cup type ""pickup"". -- PENDANT 6 AXIS -- Controller Model D32FD001 -- Capacity: 30 kG (66 Lbs) bags. -- Complete with pendant control station. -- Includes control panel Cabinet. -- Dimension; 98"" H x 42"" W x 98"" L (wooden crate); weight approx. 3,190 Lbs.(4) Robots are available. - Price is for each unit; special discount for more than (1) unit. mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Wfpbh22sy WESTERN PNEUMATICS 'WP-460' Dust Collector (SECONDARY SEPARATOR), 34,342 CFM in walk-in plenum, (475 ) filter bags 120"" long x 5"" dia. for a total 6,021 sq. ft. of bag area. Baghouse shell is approx. 13' dia. & about 18.1' high. -- Equipped with: (1) TWIN CITY 490 RTF (Radial Tip Fan) , unitary base, flanged inlet & outlet, 200 HP TEFC fan motor. . -- FILTER CLEANING: Bags are mounted up-side-down with cell plate just above the filter inlet. R... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bawwuwx9vm HAWKER 1000 Dowel Milling Machine --Specifications: --1/4"" - 1-7/8"" Dia. cap., 18"" min. stock length, 10 HP - 3,600 RPM cutterhead motor. -- Equipped with & Features --(1) Set of powered V-infeed rollers with independently adjustable tension & (1) set of powered outfeed rollers with round rolls. -- 2 HP feed drive for variable feed speed of 10 - 150 FPM, feed works is gear driven. -- Push button magnetic switch with automatic cutout for ... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. 9nwsjudgz DOOSAN DAEWOO PUMA 2000SY CNC Turning Center -- Control Fanuc 18iTB. -- Swing over bed 23.6"". -- Swing over carriage 21.6"". -- Max bar capacity 2-5/8"". -- Distance between spindles 33.8"". -- Max cutting diameter 13"". -- Spindle speed (main) 5,000 RPM. -- Spindle speed (sub) 6,000 RPM. -- Spindle motor (main/sub) 20/10 HP. -- X-Axis travel 9.84"". -- Y-Axis travel 4"". -- Z-Axis travel 22.8"". -- Rapid traverse Rates (X/Z) 790... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbhfg8immi DAEWOO PUMA 400B CNC Turning Center -- Swing over bed 28"". -- Swing over carriage 18.9"". -- Max turning diameter 21.7"". -- Max turning length 41.34"". -- X-Axis travel 14.3"". -- Z-Axis travel 43.5"". -- Spindle speed 2,000 RPM. -- Spindle nose A2-11. -- Thru spindle hole diameter 5.2"". -- Draw tube inner diameter 4.63"". -- Number of tool stations 10. -- Turning tool shank size 1.25"". -- Boring bar diameter 2.5"". -- Turret... mehr
1
Elect./Voltage: Bbiuy8nih2 DOOSAN DAEWOO PUMA 2500 LSY Multi Axis Mill & Turn Center -- Swing over bed 23.6"". -- Swing over carriage 21.6"". -- Maximum bar capacity 3"". -- Maximum turning diameter (main spindle) 13"". -- Distance between main & sub spindle nose 43.7"". -- Main spindle chuck size 10"". -- Spindle speed 35 - 3500 RPM. -- Spindle bore diameter 3.4"". -- Spindle motor 30 HP. -- Maximum spindle torque 319 ft/lb. -- Main spindle C-Axis. -- Rapid traverse rate: 2... mehr
1
Elect./Voltage: 200/230 Volt, 60cy,3Ph Fb7vxs9 DAEWOO Puma 2500LSY GL Turning Center -- Fanuc 18i-TB CNC Control -- Chuck main spindle 10"" 3 jaw -- Chuck Sub-spindle 6"" 3 jaw -- Max swing over bed 23.6"" -- Max swing over cross slide 21.6"" -- Max turning diameter 13"" -- Main spindle speed 3500 RPM -- Sub-spindle speed 6000 RPM -- Main spindle drive 30HP -- Sub-spindle drive 10HP -- Main spindle orientation .001 degree -- Sub-spindle orientation .001 degree -- Max turning leng... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 9qnpe9tgm SANBORN SCRAGG Mill -- Working capacity 24"" dia. x 16' log length. Used for pallet cants, log cabin logs or grade lumber production. -- Infeed chain log deck 16'0"" wide x 20'0"" long. -- Sawyer box enclosed with Simantic controls -- Scragg features: a overhead carriage (B Frame) for either a single pass or multiple passes with (2) 52"" dia. saw blades each powered by 100 HP motors. Kickers roll log onto chain and dogged for secure feed throug... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Fookvfj DAEWOO Puma 230MSB CNC Turning Center W/ Live Tooling and Sub Spindle -- Control Fanuc 18i. -- Max swing over bed 21.65"". -- Max turning diameter 11.4"". -- Max machining length 19.37"". -- Standard chuck size 8"". -- Spindle bore 2.99"". -- Bar capacity 2.56"" -- Spindle nose A2-6. -- Cross travel (X-Axis) 8.07"". -- Longitudinal travel (Z-Axis) 22.83"" -- Rapid traverse rate (X-Axis) 945 IPM. -- Rapid traverse rate (Z-Axis) 1200 I... mehr
1
Elect./Voltage: Baapmcq3sy DAEWOO PUMA 2000SY CNC Turning Center -- Control Fanuc 18iTB -- Swing over bed 23.6"" -- Swing over carriage 21.6"" -- Max bar capacity 2-5/8"" -- Distance between spindles 33.8"" -- Max cutting diameter 13"" -- Spindle speed (main) 5,000 RPM -- Spindle speed (sub) 6,000 RPM -- Spindle motor (main/sub) 20/10 HP -- X-Axis travel 9.84"" -- Y-Axis travel 4"". -- Z-Axis travel 22.8"". -- Rapid traverse rates (X/Z) 790/945 IPM. -- Turret positions ... mehr
1
Elect./Voltage: 208/230/460 V, 60 Cy, 3 Ph 8ifori0uq NORTHFIELD 1012, 32"" Upcut SawSpecifications & features: Cut cap. 3"" x 24"" with fence rearward to 10"" x 12"" wide with fence forward; Left -hand machine (feeds right-to-left). -- Equipped with: 15 HP motor; 32"" dia. blade cap. (used blade included); 1-1/4"" saw arbor; 34"" x 49"" table top w/ 2 rollers on infeed side; 3"" x 8"" stroke air cylinder. -- Complete with: Filter, regulator, & lubricator; Two palm control anti tie down; 5 ... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 97wcbe2pc CTD N 90 Double Miter (Toe-Notching) Saw6"" x 6"" x 4"" Toe notch cap.; production rate up to (10) strokes/Min, actuation by foot valve with [...]: 4-1/8"" x 4"" material height miter cap.; (2) 3 HP - 1,725 RPM saw motors, belt driven to saw arbors at 2,800 RPM. Equipped with: 16"" Dia. blade cap. (18"" max. dia. available as option), 1"" dia. saw arbors, blades move vertically on linear bearings on 1-1/4"" hardened & ground rods. -- Staggered bla... mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Yij0jfbdk OMGA TI 3000 SUPER Double-End Squaring SawDouble Squaring machine with outward inclinable saw units (up to 45°) with scoring; left head fixed and right head movable (via handwheel). Length readout on mechanical gauge or digital display. A special pneumatic system moves the blades to the outside when the cut has been completed, thus preventing chipping the panel during the return stroke. Equipped with: -- (2) Saw heads each with 5 HP - 3,000 RPM.,... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ceyv2l2y Scotchman CPO 315 RFA NF Automatic Cold Saw --The roll feed type automatic cold saw excels over other hitch types at longer cuts. Equipped with a vise and pinch roller, the part is advanced until it hits a positive stop and saw operations commence. -- This saw is designed for cutting non-ferrous metals. For cutting of harder metals, a different high torque, lower RPM version would be needed. -- Rectangular cutting capacity: 3"" x 3"" (76mm x... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 7j3wyhhz8 CTD D 45 Double Miter Saw w/RAZORGAGE 10' Programmable StopSpecifications & features: 10"" Blade cap., saws fixed at 45° angle (saw heads are adjustable up to 3°), (2) 1.5 HP - 3,450 RPM TEFC 2-belt drive motors, 5/8"" arbor; saw actuation by foot pedal valve. -- Equipped with: 2-1/2"" Cutting height x 3-1/4"" width cap., 35"" high cast iron table, 2"" dia. air cylinder for vertical blade travel with auto-reverse at bottom of stroke. -- Complet... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Cgrkvauw DAEWOO PUMA 8S CNC Lathe -- Max turning diameter 14.2"". -- Max turning length 14.6"". -- Max swing over bed 19.7"". -- Max swing over carriage10.8"". -- X-Axis travels 7.9"". -- Z-Axis travels 15"". -- Spindle speed 50-5000 RPM. -- Spindle motor 20 HP. -- Spindle nose A2-6. -- Spindle bore 2.44"". -- Turret stations 12 . -- Tailstock taper MT#4. -- Machine dimensions 90.5"" x 70.5"" x 67.9 -- Machine weight 8317 [...] with: -... mehr
1
Elect./Voltage: Vdd89ez DAEWOO ""PUMA 2500SY"" CNC TURNING CENTER -- Swing Over Bed: 23.6"" -- Swing Over Carriage: 21.7"" -- Max. Turning Length: 19.7"" -- Spindle Nose: A2-8 -- Spindle Bore Dia.: 3.5"" -- Spindle Speed: 3,500 RPM -- Main Motor: 29.5 HP -- Max. Bar Capacity: 3"" -- Chuck Size: 10"" -- C-Axis Indexing: .001 Degree -- X-Axis Travel: 9.8"" -- Z-Axis Travel: 22.8"" -- Y-Axis Travel: +/- 2"" -- Rapid Traverse (X, Z): 788 IPM, 945 IPM -- ... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Uxfvci3qc DESJARDINS SHINGLE SQUARER -- Shingle squarer, can also be use for other small wood --Squares corners as well as cuts to length. -- (3) 5 HP motors -- Complete with operator control panel mehr
1
Elect./Voltage: 550 V, 60 Cy, 3 Ph. Lww3f Sawmill produces 5 million board feet (25 thousand cubic meters) per shift per year, ceased operation in July 2006 due to inadequate timber supply. Equipment has remained sheltered in mill buildings and is in excellent condition; can be viewed and examined on site. Offered complete or offers for separate items will be considered. Purchaser responsible for dismantling and transportation costs. -- Mill consists of at least the following items: -- Inf... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvcp9d ATECH CRATER-02 A-700 Heavy Duty 28"" Upcut Miter [...] for straight and miter cuts of PVC, Vinyl, Aluminum and Wood. Designed in accordance with CE, UL and CSA Safety [...] with: Large 28"" dia. blade capacity allows for greater thickness cutting, approx. 2"" x 16-1/8"" to 10"" x 6"" at 90°, 2"" x 11-3/8"" to 10"" x 4"" at 45°.Specifications: -- Crater-02 A-700 has miter lock angles at 75° - 60° - 45° - 30° - 22.5° - 15° - 0°, both left and right,... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Yilmu2x3t BREVETTI Prisma Maxi Double Mitre Saw with saw blade actuation via pull handles for accuracy and cut quality. -- Well suited for a low to medium volume custom frame shop. -- Dedicated right and left 45° cuts, with (2) separate 220 Volt motors. -- Features: Max. cut width 180 mm and max. cut height 80 mm. -- BREVETTI Prisma Maxi Double Miter Saw with (2) 1.5 HP - 2,800 RPM motors. -- This model no longer manufactured. mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. M2ftf COOPER Drop saw Trimmer for trimming material lengths up to 14'0"". Unit includes (5) drop saws with 20 HP [...] machine was reworked in 2012 including: New 2-15/16"" tail shaft with decline sprockets and a new 2-7/16"" tail shaft with new sprockets for 14'0"" runner with a shifting collection deck. Pop up stop gate 0 and -6"", with a new fixed 12"" stop and hold downs. Machine has set idle in dry warehouse since the rebuild. 20' x 16"" waste belt for ... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 8za3usgos DIMTER S 90 Optimizing Cut off Saw: Working dimensions: 4"" Thick x 9"" wide max. incoming board cap.; min. cap. 3/4"" x 1"" wide. Highly accurate Push Feed Saw, right-hand version (material feeds from right-to-left), 16"" min. to 14-3/4' max. infeed board lengths, 3"" min. to 14-3/4' max. outfeed [...] with: -- 10 HP Arbor motor driving 20-1/2"" dia. blade with 30 mm bore at 2,900 RPM. -- Infeed system with: Precision, Servo controlled pusher ... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bafxjxr8sh BARR-MULLIN TURBO WONDER Optimizing Saw;2"" x 8"" Cap., 24"" min. length, up cut design. -- Equipped with: 7-1/2 HP - 1,740 RPM Main motor, 20"" blade cap., 1"" arbor, 4,660 RPM blade. -- DC Servo drive with (12) knurled steel feed rolls, variable feed speed 0 - 600 FPM, belt infeed, spring loaded press rolls, lower driven outfeed [...] Features: -- Top sensing camera for cut for value, cut for yield, cut for ratio, and cut for finger joint ... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Wygeprpna GRECON DIMTER Opticut 104 R, [...] & Optimizing Crosscut SystemHighly accurate Push Feed Saw, right-hand version (material feeds from right-to-left).Working Capacity: -- 4"" Thick x 13-1/2"" wide max. incoming board cap., min. cap. is 1"" x 1-1/2"" wide. -- 4' Min. to 14.9"" (4.5M) max. infeed board lengths, 3"" min. to 12' max. outfeed [...] & Equipped with: -- 10 HP Arbor motor driving a 520 mm (19.7"") dia. blade with 30 mm bore at 2,900 R... mehr
1
Elect./Voltage: 230 or 460 V, 60 Cy, 3 Ph 90z83jigb WHIRLWIND MODEL 1000R RIGHT HAND UPCUT SAW WITH 2"" X 8"" CUTTING CAPACITY -- Specifications & Features: -- 2-3/16"" x 8-1/4"" Cap., 14"" blade cap., 3,450 RPM, right-hand unit feeding from left-to-right, 5 HP BALDOR motor. -- This 1000R is complete with: (5 - 90) Cycles/Min; magnetic starter with low voltage controls, air filter, regulator, coalescing filter, and 4"" dust chute. -- Foot pedal actuation. -- INCLUDES TIGERSTOP WITH 1... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 90z8sycsa SALVADOR SUPERCUT 100 OPTIMUS OPTIMIZER Through-feed Optimizing Saw Controlled by Numeric Control and Personal Computer for the Complete Optimization of Wood and the Elimination of Defects -- EXTREMELY ROBUST -- Very robust and reinforced steel structure. -- Advancing system with one toothed belt with steel cables inside, step T10. -- Rising and descending of each roller before and after the blade managed by numeric control -- TECHNOLOGI... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 3tgflx0ec Automatic Cut-Off & Sorting Line ... Custom Designed for cutting pallet manufacturing lumber to size and sort to length in volume. -- Working Capacity:Cut length 12', cut width 6"", cut height 2"" (W/H cut capacity may be higher, to be verified based on application). -- Main Components:MAGGI Engineering, Automatic Lumber Feeder Magazine, ~ TIGERSTOP, Programmable Push Fence, ~ CTD, Automatic Cut-Off Saw, ~ STEFF-Maggi 2068 Feeder, ~ MAGGI Engine... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 9kyzqe2ie DIMTER 104-R Optimizing Cutoff Saw - RIGHT HAND MODELDIMTER ""OptiCut 104"" saw unit uses (2) pneumatically operated side hold-over rollers before and after the saw blade. Computer-controlled hold down pressure shoe assembly is also used to ensure that boards are securely held in position during the cut cycle. The holddown and hold-over devices and the precision servo-controlled pusher arm assure a square, accurate, and high quality saw [...] devic... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Xyxrexspl CAMERON AUTOMATION #37A-12L-R-220 QUICK CHOP Saw Optimization System includes: Saw Frame, Computer, Luminescence Sensor, Servo-Motor, Crosscut Solutions Cut-Off Saw.. -- Size Capacity: 2"" X 8"" wide max. x 1' to 12' max. incoming board length capacity. Highly accurate Push-Feed Saw, left-hand version (material feeds from right-to-left), 10' infeed. -- Drive/Servo: Equipped with: 7-1/2 HP Arbor motor and mechanical up-cut saw stroking f... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. 7r72fxnay PAUL 11-MKL Optimizing Cut-Off Saw -- 7"" x 1-3/4"" Max. cross section cap., 3/8"" min. (1/8"" with special sensor) x 3-17/32"" max. material height, approx. 17-3/4"" min. infeed timber length, approx. 16' max. infeed timber length; 5 KW (7.4 HP) saw motor, 19"" saw blade dia. running at 4,350 RPM. Equipped with: -- 32' X 3"" infeed belt conveyor feeding from right-to-left 550 FPM, with photocell measuring station, special guiding for thin mater... mehr
1
Elect./Voltage: Gdx8kpsgk MAYER FH VENEER SAW-JOINTER. Can cut veneer packs splinter free with tight joints, with Jointer-Milling unit. Able to provide a better joint than a Guillotine. --16 ft. Max. cutting length, 1-7/8"" max. cutting height, 1"" max. veneer pack height, 7/8"" min. to 23.5 in max. cut length, 2.5 HP - 8,700 RPM saw motor and 2.5 HP motor for the jointing head. -- Manual feed saw carriage unit with a jointing cutterhead following the saw, overhead holddown beam air acti... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ced0jcbs LAUDERDALE-HAMILTON DOUBLE TRIM SAW: -- Specifications:Minimum distance between the saws 60"" (1,524 mm), maximum distance between the saws 109"" (2,768 mm);Panels are fed into (2) 5 HP (3.7 kW) Saw motors with 10"" (254 mm) dia. saw [...] output of the saw is approx 600 parts per hour. -- Feed Speed;The standard link feed chain speed is approx 120 FPM (37 MPM) per cycle;The chain stops at the end of each cycle which requires the operator to pu... mehr


wacker wp ...
täglich

Neue Maschinen per Mail!

Informiert werden!

bis

bis

Suche verändern
WACKER WP 1550 AW
SOFORT VERKAUFEN
bei Europas Marktführer ab 0,79 € pro Inserat.
Jetzt Informieren


Tel: +49 (0) 201 857 86 112
oder sofort verkaufen
Jetzt Maschinensucher-App testen!
Maschinensucher-App für iPhone und Android.
Wollen Sie den Chat-Verlauf wirklich beenden?
Ja Nein
×
Maschinensucher-Chat
Name E-Mail Ihre Nachricht an den Händler
CHAT MIT HÄNDLER STARTEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Partner tippt gerade
NACHRICHT JETZT SENDEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Chat-Partner scheint inaktiv zu sein.
Chat Fenster Schließen