Smeo 1 led 24 gebraucht kaufen

Erkannter Standort: Ashburn (US) (anpassen)
Adresse angeben
oder
verschieben
5
Näherungsschalter Ur02kmqc8 - Hersteller Festo - Produkt Typ SMEO-1-LED-24 -3x Schalter vorhanden -Preis pro Stück -Gewicht 0,1 kg/Stück mehr
5
Steckdosenleitung, Stecker -Typ KMF-1-24-2,5-LED -6x Vorhanden -Preis pro Stück Clyjjt3ss -Gewicht 0,17 kg/Stück mehr
6
Eigenschaften F0mh9ao0w Hersteller: Searle Model: SR/ 240 Serial: 0557 200-240V Farbe: Silber, weiss Masse Laenge: 220mm Breite: 2790mm Hoehe: 760mm mehr
4
Näherungsschalter - Hersteller Festo - Produkt Typ SME-8-K-LED-24 Ql2tacenj -25x vorhanden -Preis pro Stück -Gewicht 0,1 kg/Stück mehr
4
Hier bieten wir einen Binder Wachstumsschrank Kuehlbrutschrank an. Temperaturbereich: 0°C bis 100°C 2 Einschubgitter aus Edelstahl MP Controller mit 2 Programmen zu je 10 Abschnitten, alternativ umschaltbar auf 1 Programm mit 20 Abschnitten Innere Glastuer Steuerung von mehreren Zeit- und Temperaturanzeigefunktionen Digitale Abstimmung Luftturbine Ohne die Umwelt zu schaedigen Kaeltemittel R134A Technische Daten: Aussenmasse max BxHxT (mm) 1034x1142x746 Innenmasse BxHxT (mm) 800x600x500 Volumen ... mehr
5
Hier bieten wir einen Binder Wachstumsschrank Kuehlbrutschrank an. Temperaturbereich: 0°C bis 100°C 1 Einschubgitter aus Edelstahl MP Controller mit 2 Programmen zu je 10 Abschnitten, alternativ umschaltbar auf 1 Programm mit 20 Abschnitten Innere Glastuer Steuerung von mehreren Zeit- und Temperaturanzeigefunktionen Digitale Abstimmung Luftturbine Ohne die Umwelt zu schaedigen Kaeltemittel R134A Technische Daten: Aussenmasse max BxHxT (mm) 1034x1142x746 Innenmasse BxHxT (mm) 800x600x500 Volumen ... mehr
1
Gebrauchtmaschine ! 4500 Betriebsstunden ! Sofort verfuegbar! Baujahr: 2012 I7fk9x9hs ALMIG VARIABLE 24 LK drehzahlgeregelter Schraubenkompressor Technische Daten Typ : VARIABLE 24 LK Moegliche Betriebsueberdruecke der Anlage (stufenlos verstellbar) : 5 - 13 bar Liefermenge bei minimaler / maximaler Drehzahl, gemessen nach ISO 1217 Anhang C bei 5 bar (ue) : 1,19 / 3,91 m³/min bei 6 bar (ue) : 1,18 / 3,79 m³/min bei 7 bar (ue) : 1,17 / 3,62 m³/min bei 8 bar (ue) : 1,16 / 3,50 m³/min be... mehr
6
Babv73uyeeFERNGESTEUERTER SPANNWAGEN TYP 224 300, BJ. 11/90. MIT HILFSWAGEN SPUR 95cm. SEHR GUTER ZUSTAND !!!!!EURO 13 900.--+ MWST. mehr
5
Hier bieten wir einen Binder Wachstumsschrank Kuehlbrutschrank an. Temperaturbereich: 0°C bis 100°C 2 Einschubgitter aus Edelstahl MP Controller mit 2 Programmen zu je 10 Abschnitten, alternativ umschaltbar auf 1 Programm mit 20 Abschnitten 3dcvy8ukm Innere Glastuer Steuerung von mehreren Zeit- und Temperaturanzeigefunktionen Digitale Abstimmung Luftturbine - Patentiertes Kuehlsystem DCT Ohne die Umwelt zu schaedigen Kaeltemittel R134A Technische Daten: Aussenmasse max BxHxT (mm) 1034x1142x746 ... mehr


smeo 1 led...
täglich

Neue Maschinen per Mail!

Informiert werden!
1
Elect./Voltage: 200-600 V, 50/60 Cy, 3 Ph Ssfh9s BIESSE ROVER 24 FT FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications: 4' x 10' ""Matrix"" grid phenolic surface table for ""Nested Base Manufacturing"". -- Working cap.:""X"" Axis is 122"" (3,100 mm), ""Y"" axis 49.2"" (1,250 mm), and ""Z"" axis stroke is 9.8"" (250 mm); max. material thickness of 6.1"" (155 mm). -- Positioning Speed:""X"" & ""Y"" Axis is 328 FPM (100 MPM), Z-axis 98 FPM (30 MPM); ""X"" axis uses a helical rack & pinio... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Gbcfsa2qq MITSUBISHI BA-24 CNC WIRE EDM -- Max workpiece dimensions 41.3"" x 32.3"" x 12"". -- Max weight of workpiece 3,300 Lbs. -- Table size 34.6"" x 26.8"". -- Travels 23.6"" x 15.7"" x 12.2"". -- U/V-Axes 3"". -- Max. taper angle 15° 10.2"". -- Rapid traverse 51 IPM. -- Wire diameters 0.004"" - 0.012"". -- Machine size 111 x 106"" x 90.5"". -- Approx. machine weight 9,200 Lbs. Equipped with: -- V-350 64 Bit CNC control. -- Automatic w... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Mcsrr HEIL 8' x 24' Rotary Drum Dryer with the following components and features: -- Drum Drive -- (2) Trunnion Bases with (2) Wheels each -- 8' x 24' Single-pass drum with center-fill and shell flighting. This type single-pass is actually often rated for capacity greater than a triple-pass dryer. -- The Drum and Trunions were completely Rebuilt but never put back into service. mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yikftrw3q LAIDIG 20 Ft. diameter by 38 Ft. high Silo with a LAIDIG Model 243 Unloader (Reclaimer) and an Unloader Discharge Screw. -- 20' x 38' Silo is a Glass Lined Bolted design manufactured by HARVESTORE. -- LAIDIG Model 243 is a Reclaimer with a single-sweep tapered Auger for equal removal of material from the silo radius, mounted on a horizontal axis to prevent material bridging. -- Professional removal and reinstallation is available. -- Pleas... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dvthxy HEIL 8-24 Drying System built around an 8' x 24' Triple-Pass Rotary Drum Dryer;Complete with the following major components and features: -- HEIL Dryer Drum. -- HEIL Trunnion Bases and Drum Drive. -- Material Input Airlock. -- Dryer System Main Fan. -- Biomass Burner with a capacity of approximately 15 MM BTUs. -- Fuel Silo (other silo is not included). -- Cyclone Collector. -- Cyclone Discharge Screw Conveyor. -- Other Conveyors. -- High P... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yikxpyiom COEN COMPANY Model DAZ-24 Burner with Refractory Lined Furnace Tube for burning solid fuels such as pulverized coal, wood fines, biomass or even gas fuels including low BTU gas. This dry dust suspension type burner comes with the following main features: -- Concurrent multi-fuel capability and can burn shavings or sawdust alone up to 12% moisture content. -- The typical application for this type burner is for supplying heat to a rotary drum dry... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 8epghwl9w SCMI OLIMPIC SE 215 SINGLE SIDED EDGEBANDER0.4 - 15mm (19/32"") max. edge cap., 3mm PVC cap. 2"" max. banding height, 2-3/8"" min. panel width and 6-5/16"" min. length. Teflon coated glue pot with glue roller application system; complete w/automatic recycling device for unused glue, quick melt, digital thermostat adjustment for temperature control. Workstations: -- 3-Roll pressure unit w/pneumatic controls for all pressure rollers. -- Double... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Eedkizt HEIL 80-24 Rotary Drum Dryer System:Complete with Burner Controls and Cyclone. The System includes the following components and features: -- HEIL 8'x24' Triple-Pass Drum. -- 10-12 MM BTU WEBB Style Biomass Burner. -- Burner & System Controls. -- Main Fan. -- Blowpipe & [...] type of system is commonly capable of drying up to (4) tons per hour sawdust or up to 60 - 65 yards per hour of molder shavings. mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yikfkarip LAIDIG built Stoage Silo System with the following features: -- 24 Feet diameter x 64 feet high Steel Bolted Silo. -- LAIDIG Model 243 Unloader (Reclaimer) - a kind that is hard to find. -- 12-Inch diameter Discharge Auger. -- Storage Silo System was previously used for biomass. Currently with some sawdust left in the LAIDIG System but removable as soon as thawed. -- Premium equipment LAIDIG brand. How can you go wrong at this price level now... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Uw70xngv0 CARBOTECH MECHANIQUE 24"" Ring Debarker. Rugged Heavy Duty Design. -- 75 HP - 575V, 3-PH Rotor Motor. -- Spiked Triangular Powered Infeed Rolls. -- Powered Pinapple Outfeed Rolls. -- LOW HOURS, Used For Only 2 Years! mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Vc0nzqy AMERICAN TOOL INC. 2516-24F3 32"" x 120” Engine Lathe Specifications: -- Swing over bed ways 33-1/2"". -- Swing over carriage wings 24”. -- Swing over cross slide 24"". -- Distance between centers 120"". -- Number of spindle speeds 27. -- Spindle speeds 12 - 800 rpm. -- Length on bed 32-5/8”. -- Spindle hole 2-1/2"". -- Headstock center #5. -- Radial load at 100 rpm front bearings 27,800 lbs. -- Spindle mount l2. --... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Srviis TIMESAVER 243-2IC Wide Belt Sander (2) Heads; ... 2-Head, 42"" width cap., Drum, [...] Configuration -- 1st Head: 11-1/2"" Dia. rubber covered spiral grooved contact roll, 50 HP motor. -- 2nd HEAD: 11-1/2"" Dia. rubber covered spiral grooved contact roll, 50 HP [...]: -- 43"" x 75"" Abrasive belts with air tensioning, ""POSI-TRACK"" solid state electronic abrasive belt sensing system, flip up abrasive belt loaders. -- Conveyor belt feed system... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 9x9ffbc7l NEWMAN SS-24 SHAVING MILL100 HP motor Shaving Mill (Complete). -- Cutterhead 24"" dia. x 14"" width, (16) knife rows x (7) knives per row; total knives: 112. -- Feed system: (2) 5"" Diameter feed rolls with positive feed tooth design allow infinitely variable speed throughout 20 FPM to 60 FPM range. -- Powered by a 3 HP motor with [...] variable frequency controller. -- Feed opening 5"" high x 13-1/2"" wide, the length of material does not rest... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. 7mxs2y0c3 FLOW INTERNATIONAL I-6024 CNC Waterjet(2) Tables (6' x 12'), cut envelope is 5.9' on X-axis, by 23.9' on Y-axis, and 8"" on Z-axis; motorized Z-axis. -- 50 HP Intensifier delivering a max. cutting pressure of 60,000 PSI, Integrated Flying Bridge (IFB); rapid traverse max. 500 IPM, contouring range 0 - 300 IPM. -- X- & Y-Axis utilize a ball screw with driven nut, recirculating ball; linear bearings and hardened precisions ways. -- Digital AC S... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 7pg2laey2 TYLE 2400 SLAT-WALL MACHINE: -- Specifications:Produces T-slots ""Slat-Wall"" for architectural/store fixture panels.48"" x 97"" Max. panel capacity., 24"" x 24"" min. cap., panel thickness 0.5"" to 1.5""; Machine capable of processing up to (40) panels/Hr, depending on material density, thickness and the slot profile. -- Equipped with:This machine is currently set up with (17) router spindles on 3"" centers,Spindles are driven in groups of (3)... mehr
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Uwy3pm2jh WARNER SWASEY 4-AXIS CNC TURRET LATHE. -- Specifications: Swing over bed ways 28"", spindle hole dia. 6.25"", spindle speed 19 - 838 RPM. -- Equipped with: GE FANUC ""16-TT"" CNC control, 24"" 3-jaw chuck with power chuck wrench (Internal/external chucking capabilities), (11) Turret positions including a 6-position side turret and a 5-position end turret. -- Features: Swing over bed ways 28"" and 60 HP variable speed drive DC motor. -- ... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cfqhopr COE 249D Veneer Lathe with the following: -- LYNDEN Step feeder. -- Small log offset x-y spindle chucks. -- 27"" maximum log diameter, 110"" knife length. -- 1484 Veneer Lathe Big Bar. -- 1390 Veneer Lathe Core drive. -- 3 to 1 inner drive ratio. -- Capable of peeling 35 cubic meters per hour. -- This COE Veneer lathe line was completely rebuilt and installed in 2006. The lathe was operated less than one year and is reportedly in exce... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Bwuf9xp MAZAK 24 x 120 ENGINE LATHE --swing over bed 24"" --swing over cross slide 14 .5 --centers 120"" --spindle speed 12 - 1,200 RPM. --Hole thru 4-1/16"" --motor 20 HPEquipped with : --4-jaw chuck --taper attachment --aloris tool post --tailstock --flood coolant --steady rest --Chuck Guard --Chip bucket --Newall Digital read out mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Mp99n MAZAK 24 x 160 ENGINE LATHE --swing over bed 24"" --swing over cross slide 14.5"" --centers 160"" --spindle speed 12 - 1,200 RPM --Hole thru 4-1/16"" --motor 20 HPEquipped with : --4-jaw chuck --taper attachment --aloris tool post --tailstock --flood coolant --steady rest --Chuck Guard --Chip bucket --Newall Digital read out mehr
1
Elect./Voltage: 3ij2tbuhl MAZAK 24 x 60 ENGINE LATHE swing 24""swing over cross slide 14 1/2""centers 60""spindle speed 12 - 2000 [...] thru 4.06""equipped with :20' 4 jaw chucktaper attachmentaloris tool posttailstockflood coolantsteady restChuck GuardChip bucketNewall Digital read out mehr
1
Elect./Voltage: 3ij2jqotk MAZAK 24 x 80 ENGINE LATHE --swing 24"" --swing over cross slide 14 1/2"" --centers 80"" --spindle speed 12 - 2000 [...] --Hole thru 4.06""equipped with : --20' 4 jaw chuck --aloris tool post --tailstock --flood coolant --steady rest --Chuck Guard --Chip bucket --Newall Digital read out mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Cc7c7ulq MAZAK 24 x 120 ENGINE LATHE --swing over bed 24"" --swing over cross slide 14 .5 --centers 120"" --spindle speed 12 - 1200 [...] --Hole thru 4 1/16"" --motor 20 HPEquipped with : --4-jaw chuck --taper attachment --aloris tool post --tailstock --flood coolant --steady rest --Chuck Guard --Chip bucket --Newall Digital read out mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Yq9hto MAZAK 24 x 160 ENGINE LATHE --swing over bed 24"" --swing over cross slide 14.5"" --centers 160"" --spindle speed 12 - 1,200 RPM --Hole thru 4-1/16"" --motor 20 HPEquipped with : --4-jaw chuck --taper attachment --aloris tool post --tailstock --flood coolant --steady rest --Chuck Guard --Chip bucket --Newall Digital read out mehr
1
Elect./Voltage: 3ij099i9j MAZAK 24 x 80 ENGINE LATHE --swing 24"" --swing over cross slide 14 1/2"" --centers 80"" --spindle speed 12 - 2000 [...] --Hole thru 4.06""Equipped with : --20' 4 jaw chuck --aloris tool post --taper attachment --tailstock --flood coolant --steady rest --Chuck Guard --Chip bucket --Newall Digital read out mehr
1
Elect./Voltage: 7dnsxbgc8 Lansing GR SUPER B 60"" X 240"" Lathe -- Swing over bed of 60'' -- Swing in gap of 73'' -- Swing over saddle of 43'' -- Hole through spindle of 4'' -- Spindle speeds of 2.8 to 310 rpm -- Main motor is 50hp -- Tail stock dia. is 5 1/2'' -- Equipped with inch & metric threading and pendant control -- Transformer 480 volts down to 240Notes -- .135 Backlash on Y axis, no dial on Z. The backlash is mostly in the geartrain -- .005 Taper in 8' -- Sitting on 6"... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Cljjm8iu MAZAK-HERCULES AJAX Mazak 24 Manual LatheSpecifications: -- Capacity: 24"" swing x 10 ft. between centers -- Swing Over Cross Slide:14.46"" -- 2"" spindle boreIncludes: -- 2 Steady Rests -- Tapper Attachment -- 3 Jaw ChuckRecently Refurbished, Very Good Working [...] AJAX Mazak 24 Manual Lathe mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. 3ij23sz2m MAZAK 24 x 160 ENGINE LATHE --swing over bed 24"" --swing over cross slide 14.5"" --centers 160"" --spindle speed 12 - 1,200 RPM --Hole thru 4-1/16"" --motor 20 HPEquipped with : --4-jaw chuck --aloris tool post --tailstock --flood coolant --steady rest --Chuck Guard --Chip bucket --Newall Digital read out mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Ejyjhfs7y MIGHTY VIPER VTL 20/24 CNC Vertical Turret Lathe -- Table diameter: 78.75""/2,000mm. -- Distance spindle to table: (lowest-highest): 2” ~ 68”. -- Max turning diameter: 94.50""/2,400mm. -- Max swing: 94.50""/2,400mm. -- Max turning height: 59.2""/1,500mm. -- Max workpiece: lbs/kg 44,000/20,000. -- Max torque of table: lbs-ft/nm 18,150/24,600. -- Max cutting force: lb-ft /nm 5,950/26,500. -- X axis stroke: 72.25""/1,835mm. -- Z ... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbfluisk9b HOLZMA HPP 250 Front Load Automatic Panel Saw: 149.6"" (3,800 mm) Cutting length & pull-back; 2.8"" (72 mm) saw blade [...]: -- 10 HP (7.5 kW) - 4,700 RPM Main saw motor, 350 mm main saw dia; -- 1.5 HP (1.1 kW) - 5,100 RPM scoring motors, 200 mm scoring saw dia.; NC controlled scoring saw adjustment from ""CADMATIC"" [...] carriage: Variable travel speed from 16 - 262 FPM (5 - 80 MPM), constant return of 262 FPM (80 MPM).Pusher Fence: -- Ele... mehr
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Beym302 IIDA MM-224 Millenium 9 Heads Troughfeed Moulder -- 9-Head, (B-R-L-R-L-T-T-B-U), 9-7/8"" x 5-3/4"" capacity. Head sequence: -- Bottom 7.5 HP, right 7.5 HP, left 7.5 right 7.5 HP, right 7.5 HP, top 10 HP, top 10 HP, bottom 75 HP, and universal 15 HP motors. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- All spindle adjustments of spindles with mechanical digital readouts for setting accuracy. Chipbreakers include mechanical digital r... mehr
1
Elect./Voltage: Ftkg8hqmi Sharp SV-2412 Vertical Machining Center -- Table size: 27.5"" x 12"". -- X-Axis travel: 24"". -- Y-Axis travel: 12"". -- Z-Axis travel: 17"". -- Spindle speed: 8,000 RPM. -- Spindle taper: CAT 40. -- Spindle motor: 7.5 HP. -- Tool changer: 10 station umbrella [...] with: -- Fanuc 0I CNC control. -- Quick code. -- Rigid tapping. -- Spindle orientation. -- Chip conveyor. -- 256 MB Memory. -- Remote jog handle. mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Itfhzil 2012 SHARP SV-2414SX Vertical Machining Center -- X-Axis travel 24"" -- Y-Axis travel 14"" -- Z-Axis travel 18"" -- Table 28"" x 13.8"" -- Spindle nose to table 3.1"" - 20.94"" -- Feed rate 0.04 - 393.7 IPM. -- Rapid traverse 590 IPM. -- Taper CAT 40. -- Spindle speed10,000 RPM -- Spindle motor 7.3/10 HP. -- Maximum tool diameter 3"" -- Maximum tool dia. with adjacent pocket empty 5"" -- Maximum tool length 12"" -- Maximum tool wei... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Toxnfe8r Sharp SV-2412 Vertical Machining Center -- X-Axis travel: 24"". -- Y-Axis travel: 12"". -- Z-Axis travel: 18"". -- Spindle taper: CAT 40. -- Spindle motor: 10HP. -- Spindle Speed: 8,000 RPM. -- Tool changer: 10 stations. Equipped With: -- Fanuc OI Mate-MB control. -- Chip conveyor. -- Box way construction. Machine has seem very limited usage, approximately 2,000 at last check (possibly up to 3,000 now). mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Mppin NORTHFIELD 240 STRATO-PLANER,Top and Bottom Helical Carbide Spiral Heads with Grinders and Jointing [...]: -- Min. stock length 12"" and butted 6"". -- Min. stock thickness 1/4"". -- Knife helical carbide cutter heads -- Upper cutterhead motor 40 HP. -- Lower cutter head motor 30 HP. -- 1 HP Motorized thickness opening 0"" to 6"". -- Central distance between cutter heads is 56"".Equipped with: -- (4) 4"" Dia. powered upper & lower feed... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bzef0teg MEREEN-JOHNSON MODEL 424 DIPCHAIN GANG RIPSAW -- 24"" Arbor width cap., 14"" max. dia. tooling, 3-1/2"" max. motorized thickness adjustment, 29"" min. length for glue joint accuracy and 22"" min. for busting only, 6"" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bhx0xqf MEREEN-JOHNSON MODEL 424 DIPCHAIN GANG RIPSAW -- 24"" Arbor width cap., 14"" max. dia. tooling, 3-1/2"" max. motorized thickness adjustment, 29"" min. length for glue joint accuracy and 22"" min. for busting only, 6"" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J ""... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Ve3tgscm7 24"" Arbor capacity, 75 HP main motor, dip chain feed 1/8"" to 3-1/2"" thickness capacity, 10"" to 14"" blade capacity, 22"" minimum stock length, 5 HP variable feed speed from 20 to 150 FPM, spring loaded holddown rolls, 2-3/16"" diameter arbor. Includes (1) saw sleeve. mehr
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. 7mx8pwvqd TIMESAVERS 2311-24-6 SINGLE HEAD WIDE BELT SANDER1-Head, 43"" cap., 0 - 5"" opening (33"" - 38"" passline). -- Combination head with 4-3/4"" contact roll & 2-1/2"" finishing platen, 25 HP motor. 43"" x 75"" abrasive belt, disc brakes on main motor, centralized control panel. -- Features: Digital thickness readout, double infeed & outfeed holddown rollers, AC variable feed speed from 20 - 45 FPM, hour meter, main motor load meter. -- Includes:... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Ewam009 CEMCO URF-2243 Wide Belt Sander (2) Heads43"" Capacity Drum, Combination Head. Head Configuration: -- 1st Head: Rubber covered contact roll, 10"" dia., 25 HP motor. -- 2nd Head: Combination head with roll and finishing platen, 20 HP motor. Specifications: -- Belt size for 1st and 2nd head: 76"" x 43"". -- Electronic abrasive belt tracking & pneumatic belt tensioning. -- 2 HP Variable feed speed conveyor motor from 15 - 60 FPM, 0"" - 6"" mo... mehr
1
Elect./Voltage: Hpmfxh2 (4) BECKWOOD 110 TON FOUR POST HYDRAULIC (UP & DOWN ACTING) POWEER COMPACTION PRESS. -- Specifications: Tonnage 110, 55-Ton each 2,860 PSI, retract tonnage 30, 2-number of Rams cylinder, Ram stroke 18"", Ram size (2) 9"" dia.. x 20"" long, (2) Ram bolster size 12"" x 12"" x 3"". -- Features: Distance from upper Ram to lower Ram 67"", Die mounting cavities size (2) 11"" x 11"" x 15"" deep, fixed position weldment - 15"" centers. -- Equipped with; MICROLOGIX ""100... mehr


smeo 1 led...
täglich

Neue Maschinen per Mail!

Informiert werden!

bis

bis

Suche verändern
SMEO 1 LED 24
SOFORT VERKAUFEN
bei Europas Marktführer ab 0,79 € pro Inserat.
Jetzt Informieren


Tel: +49 (0) 201 857 86 112
oder sofort verkaufen
Jetzt Maschinensucher-App testen!
Maschinensucher-App für iPhone und Android.
Wollen Sie den Chat-Verlauf wirklich beenden?
Ja Nein
×
Maschinensucher-Chat
Name E-Mail Ihre Nachricht an den Händler
CHAT MIT HÄNDLER STARTEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Partner tippt gerade
NACHRICHT JETZT SENDEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Chat-Partner scheint inaktiv zu sein.
Chat Fenster Schließen