Emcomat 20 d gebraucht kaufen

Erkannter Standort: Ashburn (US) (anpassen)
Adresse angeben
oder
verschieben
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Belsbv0q MULTICAM 3000 SERIES 3-204R 5 X 10 with Multi spindles:60"" x 120"" Fixed table, moving gantry machine in a front-to-back configuration with a 4 zone vacuum table supported by a (1) 17 HP vacuum system . -- Equipped with:(2) ""PERSKE"" 4 HP wench type spindles using ER35 collets up to 5/8"" with variable speed by inverter from 4,000 up to 24,000 RPM. -- Full table coverage:On X- & Y-axis, rack & pinion gantry drive with brushless Servo motors u... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bafxnao3os MULTICAM G-204 ""Graph-X-Cutter"" CNC Knife-Cutting Finishing System:5' X 10' Fixed table, moving gantry machine in a front-to-back configuration with a single zone vacuum table supported by a (1) Vacuum pump [...] Graph-X-Cutter Registers, Routes, and Cuts with Precision at High Speeds, -- Equipped with: (1) 0.4 HP 23,000 RPM spindle with a tool diameter of up to ¼” (6 mm). You can configure up to 2 tangential knife receivers. You ... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. 8wmjwkjwx NYLE L1200S Dry Kiln Heating unit -- Complete packaged dehumidification drying system ready for installation into custom-built drying chamber. -- Designed to operate effectively at low humidity levels; can bring moisture content to as low as 6%; patented ""XDH"" Control System is housed in a corrosion resistant, epoxy coated aluminum cabinet and operates over a wider range of temperatures with greater efficiency than any dryer available. -- The ... mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Fzxmmwuuw MULTICAM 3000 SERIES 3-204R with Tool Changer; 5' X 10' Table: 60"" x 120"" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 35 HP vacuum blower system .Equipped with: -- (1) 10 HP ""HSK"" spindle with 6-position static tool changer, variable speed by inverter up to 24,000 RPM. -- Full table coverage onX- & Y-axis, rack & pinion gantry drive with brushless Servo motors using integ... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Mlhjz NORFIELD 1020 Double-Sided Casing, Miter & Trim SawThe saw cuts side casing, head casing, brick mold and jamb stock. It quickly miters casing and brick mold, and square cuts stops or jamb stock at up to (30) pieces per minute. -- The feed system ensures steady feed rate and provides the additional benefit of operator safety. -- Double end cutting reduces labor cost and changeover from square to miter cuts, allowing quick and easy processing of comp... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Lwxsb HENDRICK 20ZXGN1337 ATC-T6 CNC Router with ATC; 51"" X 145"" table in front to back configuration with phenolic vacuum ready table with 7.9"" (200 mm) of Z-stroke. Equipped with: -- (1) 12 HP Router spindle with an 6-position rotary tool changer mounted on the front. -- The spindle has ceramic bearings and is air cooled and manually grease lubricated to insure smooth operation and long life; solid-state frequency inverter for spindle speed control ... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yzmj9ypzb BUDZAR INDUSTRIES, INC. Thermal Oil Boiler with the following features: -- Electrically heated with a Full Load of 160 Amps. -- Max. working pressure: 50 PSI. -- Temperature range: 50° F to 450° F -- Designed flow rate: Zone 1, 120 GPM 75’ TDH. -- Previously used to heat a 14-opening plywood hot press. -- Save a bundle on this one - pay in Canadian dollars! mehr
1
Elect./Voltage: 9az922uon LUCAS ""542B-120"" TABLE-TYPE HORIZONTAL BORING MILL -- Spindle Diameter: 5"" -- Table Area: 110"" x 60"" -- Spindle Speed: 10-1,200 RPM -- Spindle Motor: 25 HP -- Feed Range: .0001 - 1.038 IPR -- Table Travel: 96"" -- Saddle Travel: 120"" -- Vertical Travel: 84"" -- Spindle Travel: 36"" Equipped with: -- Pendant Control -- 4-Way Bed mehr
1
Elect./Voltage: 220 V, 60 Cy, 1 Ph 88gdi27u7 HAMER 2040 Form-Fill & Seal Loose Bagging System:This HAMER ""2040"" Form-Fill & Seal Loose Bagging System is an advanced, reliable system that automatically forms bags from centerfold poly-roll-film. -- Compact, totally automated system with a typical (1) Year investment payback from increased productivity and bag cost savings. -- Rate of up to (30) bags per minute, depending on the density of the loose product. -- Possible bag size from 10-1/2"... mehr
1
Elect./Voltage: 120/240 V, 60 Cy, 1 Ph. Mtqgsg HAMER 2040 Form-Fill & Seal Loose Bagging System:This HAMER ""2040"" Form-Fill & Seal Loose Bagging System is an advanced, reliable system that automatically forms bags from centerfold poly-roll-film. -- Compact, totally automated system with a typical (1) Year investment payback from increased productivity and bag cost savings. -- Rate of up to (30) bags per minute, depending on the density of the loose product. -- Possible bag size from 10-1... mehr


emcomat 20 d
täglich

Neue Maschinen per Mail!

Informiert werden!
1
Elect./Voltage: 220/240 V, 60 Cy, 3 Ph. Mok7t [...] INDUSTRIAL USHB200 13 200 TON X 13’ HYDRAULIC PRESS BRAKE • Working Pressure: 200 Tons • Pressing Speed: Dependent on Tool Load• Length of Working Table: 157.4"" • Hydraulic Oil Capacity: 97 Gal.• Distance Between Housings: 124"" • Motor Horsepower: 20 HP• Throat Depth: 12.5"" • Net Weight: 28,660 lbs.• Stroke Adjustment of Ram: 2.75"" • Length: 179""• Ram Travel: 7.0"" • Width: 64""• Open Height: 17.5"" • H... mehr
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. 8novkmfaj NAZZARENO - [...] 201 M, [...] PressSpecifications: Produces a 2.8"" (70 mm) dia. briquette (endless production): 265 - 330 Lbs/Hr (120 - 150 kG/Hr) capacity, 14.8 HP (11 kW) main motor. -- A horizontal feed screw provides a continuous and constant load for each press cycle. -- Features: Pistons (loading and compression), compression heads, extruders, and oversized piston clamping assemblies to ensure a high quality briquette and a long operati... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ssgcb8 CASADEI ALA 20 PLUS SINGLE SIDED EDGEBANDER.5mm to 2mm thick pvc or tape banding capacity and up to 5mm HPL or wood strips, 12mm to 50mm panel height capacity. Mininmum part length 7-1/2"" minimum part width3"". Quick melt glue system, 10 to 15 [...] with: -- Application of edging by Hot Melt glue roller. Max 3mm from coil or 5mm with optional strip feed -- Automatic tape application , coil cut off, Single saw unit End trim -- Cutter heads for 3mm... mehr
1
Elect./Voltage: Wpuzqdm90 4-3/4"" Wotan Model B105/120m Boring Mill -1979Machine Specifications: -- 4-3/4"" Spindle Diameter. -- #50 Spindle Taper. -- 27-1/2"" Spindle Travel. -- Spindle Speed Range 9 - 1,000 RPM. -- Spindle, Headstock, & Table Feeds (27) 0.0013 - 0.500 IPR. -- (12) 3 - 96 Threads. -- 60 "" Vertical Travel of Headstock. -- 72"" Table Cross Travel. -- 56"" Longitudinal Table Travel. -- 47"" X 59"" Power Rotary Table. -- Rotary Table Load Capacity 8,800 Lbs. -- ... mehr
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Naw9x BRANDT KTD 720 Contour Edgebander -- Designed for straight, curved (contour), or beveled edgebanding. 0.5 - 3 mm -- Edgebanding thickness, capacity for 3 mm PVC banding, 10 - 55 mm height, -- Automatic advance of banding material from 13 - 29 FPM, 25 mm min. radius. -- Small glue pot for quick heat-up, magazine for coil or solid strips, guillotine cutoff, manual advance of panel through glue roller, tiltable 0ø - 15ø, tabletop angles up to 0ø - 45ø... mehr
1
Elect./Voltage: 793ndcm9f WYSONG PHP 175-120 CNC Hydraulic Press Brake -- Maximum Tonnage 175 tons -- Overall Bed Length 10' -- Stroke 8"" -- Max Die Space 17"" -- Closed Height 10"" -- Throat Clearance 9.750"" -- Distance Between Housings 102"" Equipped With: -- PROFORM 6 AXIS BACKGAUGE SYSTEM mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Uxl0ccdix TRUMPF 357-TON x 13' TRUMABEND 4-AXIS CNC HYDRAULIC PRESS BRAKE. -- Specifications: Max. bending length 161.5"", capacity (357) tons, distance between housings 145"", stroke 14"", throat 16"", open height 21"". -- Equipped with: 4-Axis CNC backgauge. -- Machine is in like new condition with low Hrs. mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Balji8xw9n IMA COMPACT PC 6220 ... Production Edgebander with Pre-Milling & Corner Rounding -- Working Capacity:0.4 - 20 mm (3/4"") Edgebanding thickness cap. (up to 3mm in coil); 10 - 50 mm panel thickness, 60 mm minimum panel width & 150 mm minimum panel length; -- Equipped With: -- Pre-Milling Unit, 2 x 3.0 KW (4.0 HP) vertical spindles - 12,000 RPM motor ea. 200 Hz, both w/jump movement and reversible rotation, SIKO digital readouts, particle & deb... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ftkj7tius HOMAG OPTIMAT KAL 310/8/A20/S2/CNC ... Production Edgebander with Pre-Milling & Corner Rounding;Working Capacity: Min/max. 0.4 - 20 mm edge thickness cap., min. panel width 55 mm (2-1/4""), panel thickness 12 - 60 mm, min. edge length 7.8""Equipped With: -- In-feed Fence #0005, adjustable with digital mechanical positioning counter. -- Pre-Milling #3481, (2) heads (each with 3 kW - 9,000 RPM motor, one with jump control); chip blowoff unit ... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bawwoopjqx FELDER G 320 SINGLE SIDED EDGEBANDER.05 mm to 3mm PVC , and [...] feed with offset rollers to keep the panel against the fence and [...] thickness capacity from 0.4- to - 3.0 mm. Edging width from 10-45 mmEquipped with: -- Automatic glue station with full temperature control -- 5.5 meters per minute feed [...]: -- Double end trim via single motor and 2 saw blades. -- Top and Bottom trimming station with fine micro adjustments -- Top an... mehr
1
Elect./Voltage: 240 or 480 V, 60 Cy, 3 Ph Mzqqn HOMAG, PROFI KAL 310/6/A20 ... ""HIGH-TECH"" Edgebander with Pre-Milling & Dual Glue Systems, EVA (Hot Melt) + AirTech [...] Capacity:Edge thickness, coiled stock min/max, 0.3 - 3 mm (0.012. - 0.112""), straight edges, min/max. 0.4 - 20 mm (0.016 - 0.788""), panel thickness min/max. 12 - 60 mm (0.472 - 2.362""). EQUIPPED WITHParts In-feed Device:(6) staggered, inclined powered in-feed rollers, capable to insert parts automatically arriving fro... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Ba2lrqg2za CHARMILLES ROBOFORM C200 Electrical Discharge Machine -- Table size 16"" x 22"". -- Reservoir 34"" x 25.5"" x 63"" / approx. 240 gallons. -- Work tank (enclosure): 38"" x 23"" x 12"" / approx. 50 gallons. -- Workpiece weight: 1,100 Lbs. -- X-Axis travel 12.6"". -- Y-Axis travel 8.6"". -- Z-Axis travel 12.6"". -- C-Axis travel 360°. -- Angular resetting of electrodes: 0.002°. -- Axial resetting of electrodes: 2 MicroM. -- Max. machining ... mehr
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Dvcgybeig HOMAG KR-77/A20/S2 ... Production Edgebander with Pre-Milling and ATC (8 Station) Corner Rounding Unit -- Capacity / SpecificationsEdge thickness 0.4 - 20 mm, min. panel width 55 mm (2-1/4""), panel thickness min/max 12 - 60 mm. -- In-feed Section Equipped With: -- Squaring In-feed Fence, ... THK guided and air cylinder operated sliding fence on work-piece outrigger support side to align the front-edge of a work-piece to allow squaring up of a... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 2qxmn28hy HOMAG KAL 310/4/A20 Edgebander (High Production): -- Capacity Specifications:0.4 - 20 mm Edge thickness cap., min. panel width 55 mm for panel thickness 12 - 22 mm & under; 100 mm for panel thickness over 22 - 60 mm. -- Variable feed speed from 18 - 24 MPM (60 - 79 FPM); 80 mm feed track pads, motorized V-groove belt on top pressure [...] & Infeed Section:Hot Melt Glue System ""A 20"" Quick-Melt Unit; Pressure roll section with (7) rollers, (1)... mehr
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Baapjmwj8p HOMAG KL 76/A20 EDGEBANDER (W/CORNER ROUNDING) and Doucet Return Conveyor Capacity Specifications:0.4 - 20 mm Edge thickness cap., min. panel width 55 mm (2-3/16"") for panel thickness 12 - 22 mm (1/2"" - 7/8"") and under; 100 mm (3.9"") for panel thickness over 22 - 60 mm (7/8"" - 2--5/16""); for up to 3 mm Coil stock, HPL, and strip stock up to 20 mm (3/4"").Feed & Infeed Section of Machine: -- Top pressure beam with: Double-wide compound V-b... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Cqfmmh8wa SCMI K 203-ER EDGEBANDER WITH CORNER ROUNDING13/64"" (5 mm) Max. edge cap. (Optional upgrade 8 mm) for strip feeding, 1/8"" (3 mm) for coil feeding; 65 mm min. panel width and 140 mm min. length, panel thickness 8 - 55 mm. -- Equipped with: Automatic strip & coil feed magazine, Teflon coated glue pot (heat-up time 10 Min), 3 mm cap. guillotine, 3-roll pressure unit w/pneumatic control. -- Workstations: Double motor front & rear end trim mounted... mehr
1
Elect./Voltage: 220/380 V, 50/60 Cy, 3 Ph. 9vmucnbqn SCMI OLIMPIC S-212 EDGEBANDER WITH CORNER ROUNDING0.4 - 3 mm Edgebanding thickness, 10 - 50 mm Panel thickness, min. panel width 5"", min. panel length 8"", dual feed speed of 39 & 59 FPM. -- Automatic strip & coil feed magazine with 3 mm PVC guillotine, granular glue system, Teflon coated lower applicator glue pot; 1"" Dia. glue applicator roller w/reversible rotation Pressure section; (1) Large dia. clutch controlled drive roller, (2) pn... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ehddf8v SCMI K201 HFE SINGLE SIDED EDGE BANDER1/8"" Max. edge cap., and 1-1/2"" max. panel thickness; semi-automatic strip & coil feed magazine (manual single strip feed), Teflon coated glue pot w/fast (8) Minute heat-up time, 1.2 mm cap. guillotine. -- Workstations: Single motor front & rear end trim (0.8 HP - 10,000 RPM motor); top & bottom flush trims (0.8 HP - 27,000 RPM ea. motor), straight or 12° bevel cutters. -- Top & bottom buffing unit (0.25 HP... mehr
1
Elect./Voltage: Wdzhc UNISIG USK75-2000 CNC Deep Hole Drilling Machine -- Minimum Drilling Capacity In Solid Blank 093"" -- Maximum Drilling Capacity In Solid Blank 3"" -- Maximum Drilling Capacity Counter Bore or Trepan 4.3"" -- Maximum Drilling Depth 80"" -- Table Size 40"" x 66"" -- Travel of Counter Rotation Spindle 40"" -- Max Distance Drill Face to Counter Rotation Spindle 84"" -- Table Load Capacity 11,000 lbs -- Spindle Drive 50 HP -- Approximate Dimensions 390"" x 120"" -... mehr
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. 9db93n03a HOMAG KLK79/A20/S2 Edgebander with Pre-Milling and Corner Rounding -- 0.4 - 20 mm Edge thickness cap., min. panel width 55 mm (2-1/4""), panel thickness 12 - 60 mm, min. edge length 7.8"" Workstations: -- Pre-Mill Station to clean the edge of the panel prior to applying the Edge Strip. -- Quick pre-melt glue pot, -- Pressure zone with (7) pressure rollers, -- End trims, -- T & B rough trim , --T & B Fine trim profile. -- 4-motor Corner R... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 8le03tp3s SCMI K 208E SINGLE SIDED EDGEBANDER5/16"" (8 mm) Max. edge cap., 1-3/4"" max. banding height, 2-3/8"" min. panel width and 6-/14"" min. length. Equipped with: Automatic strip & coil feed magazine, Teflon coated glue pot (heat up time 10 Min), upgraded to Heavy Duty 3 mm PVC cap. guillotine, 3-roll pressure unit w/pneumatic controls. 42 FPM Fixed feed speed via 1 HP [...]: -- Double motor front & rear end trim (0.3 HP - 12,000 RPM motor ea.), til... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Enckmnz SCMI OLIMPIC S-2000 FRT EDGEBANDER WITH PRE-MILL AND CORNER ROUNDING15 mm Max. edge cap., 2"" max. banding height; 2-3/8"" min. panel width and 6-5/16"" min. [...] with: -- Universal Pre-Milling heads (2 with 2.8 HP - 12,000 RPM motors), SIKO digital readouts. -- Automatic strip & coil feed magazine, Heavy Duty 3 mm PVC cap. guillotine. -- ""Quick Melt"" glue system over an Teflon coated ""Quick release"" glue pot, ""reversible"" glue roller (... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. P3bqjf SCMI, K 208-ERT-L Edgebander, ... with Pre-Mill & Corner RoundingBasic Specifications: -- 15/32"" (12 mm) Max. edge cap., 2"" max. (only 1-3/4"" w/corner rounding) banding height, 2-3/8"" min. panel width and 6-5/16"" min. length. -- Equipped with: ""RM-K"" 2-Head Pre-milling station model (2.5 HP - 19,000 RPM motors ea.), automatic strip & coil feed magazine w/Heavy Duty 3 mm PVC cap. guillotine. -- Teflon-coated glue pot, glue roller applicati... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 90z237p7x SCMI K 208 C EDGEBANDER5/16"" (8 mm) Max. edge cap., 2"" max. banding height, 2-3/8"" min. panel width and 6-1/4"" min. length. -- Equipped with: Automatic strip & coil feed magazine w/Heavy Duty 3 mm PVC cap. guillotine, Teflon coated glue pot with glue roller application system complete w/automatic recylcling device for unused glue, digital thermostat adjustment for temperature control; 3-roll pressure section w/pneumatic controls for all press... mehr
3

2004-JCB 526-55 JCB 526-55

BT78 3AJ Dromore Großbritannien und Nordirland
5363 km
2004
sehr gut (gebraucht)
2004 JCB 526-55 Turbo Telehandler c/w Joysticksteuerung, PUH, Eimer - SLP526554E0284968 dieser Maschine bei einer uneingeschränkten Auktion in Dromore, Co. Tyrone, Nordirland am 23. bis Euro Auktionen verkauft werden & 24. Februar 2018. Wenden Sie für weitere Informationen sich an Michael Conway auf + 44 7778 468618 oder Cathal Doherty auf 353 8621 76148 Bbjgmz73s9 mehr
3
2004 JCB 526S Turbo Telehandler c/w Joystick steuert, PUH, QH, Eimer, Gabel - HX04 YHL - SLP526554E0285201 wird diese Maschine bei einer uneingeschränkten Auktion in Dromore, Co. Tyrone, Nordirland am 23. & 24. Februar 2018 von Euro Auktionen verkauft. Wenden Sie für weitere Informationen sich an Michael Conway oder Cathal Doherty Bbjgmg2rk7 mehr
3
2012 JCB 527-58 Agri Turbo Telehandler c/w Joystick Controls, PUH, Forks (Reg. Docs. Available) - WX62 FJZ - JCB5AVSTK01473730 C7crwoo0 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
2006 Bomag BW120AD Double Drum Vibrating Roller c/w Roll Bar - 101880023413 Jibph0z This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
Bbjgjra8wu2013 Thwaites 1 Ton Hi Tip Dumper c/w Roll Bar (Reg. Docs. Available) - RX13 GXY - 17C5751 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
C39skwgq2012 Terex TA6 6 Ton Dumper c/w Roll Bar - SLBD1DP0EC0MS3784 - choice This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
2011 Yanmar B25V Rubber Tracks, Blade, Offset, QH, Piped, - AYR00B25J0602721 Jfcdpsp This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
2014 Hitachi ZX55U-5A CLR Rubber Tracks, Blade, Offset, CV, QH, Piped c/w A/C - HCMAEB50A00051566 Na20n This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
Bbjghexrwm2007 Volvo EW160C Wheeled Excavator, Blade, Stabilisers, CV, VG, QH, Piped c/w A/C - VCEW160CK00120063 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
2010 JCB JS130LC 700mm Pads, CV, QH, Piped - JCBJS13CP01535533 Bbjgg2gmcl This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
2014 Hitachi ZX160LC-5G 500mm Pads, CV, QH, Piped c/w A/C - HCMDBG90C00020361 Gacqjddgi This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
Jccxxkf2007 Case CX210B 700mm Pads, CV, QH, Piped c/w Reverse Camera, A/C - DCH210R5N7EAH1683 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
Bbjgeflzoc2011 Hitachi ZX210LC-3 700mm Pads, CV, QH, Piped, Aux. Piping c/w A/C, Reverse Camera, Demo Cage - HCMBFF00H00216163 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr
3
I9dl9b22014 Hitachi ZX200LC-5 600mm Pads, CV, QH, Piped c/w A/C - HCMDCD91K00302886 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway on or Cathal Doherty mehr
3
2015 Komatsu PC200 - 8M 0 600mm Pads, CV, QH, Piped c/w a/c - KMTPC244JFR201187 dieser Maschine durch Euro-Auktionen werden, bei einer uneingeschränkten Auktion in Dromore, Co. Tyrone, Nordirland am 23. verkauft wird & 24. Februar 2018. Wenden Sie für weitere Informationen sich an Michael Conway auf + 44 7778 468618 oder Cathal Doherty auf 353 8621 76148 Ssys70 mehr
3
Bbjgas7v7w2015 Hitachi ZX210LC-5 700mm Pads, CV, VG, QH, Piped c/w Reverse Camera, A/C - HCMDCK50V00302586 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty mehr


emcomat 20 d
täglich

Neue Maschinen per Mail!

Informiert werden!

bis

bis

Suche verändern
EMCOMAT 20 D
SOFORT VERKAUFEN
bei Europas Marktführer ab 0,79 € pro Inserat.
Jetzt Informieren


Tel: +49 (0) 201 857 86 112
oder sofort verkaufen
Jetzt Maschinensucher-App testen!
Maschinensucher-App für iPhone und Android.
Wollen Sie den Chat-Verlauf wirklich beenden?
Ja Nein
×
Maschinensucher-Chat
Name E-Mail Ihre Nachricht an den Händler
CHAT MIT HÄNDLER STARTEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Partner tippt gerade
NACHRICHT JETZT SENDEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Chat-Partner scheint inaktiv zu sein.
Chat Fenster Schließen