Jet jwl 1442 gebraucht kaufen

Erkannter Standort: Ashburn (US) (anpassen)
Adresse angeben
oder
verschieben
1
Elect./Voltage: 240/480/575 V, 60 Cy, 3 Ph Cfzyxbk TORIT 232RFW12 Dust collector. 28,900 CFM at 8:1 Air-to-cloth ratio, 123"" dia. round Baghouse.(232) Cloth filter bags of 12' length, 3,622 sq ft of filter area (oval bags provide for radial movement of bag during cleaning for longer life). -- 100 HP TEFC motor, platform-mounted fan/motor. -- Reverse Air filter cleaning is by a 5 HP medium pressure air pump (eliminates the need for compressed air which can be susceptible to condensation an... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Myxpz SLY INC STJ-4117-10 TUBEJET Baghouse with Top Bag Removal/Access. -- Specifications: SLY Series STJ-503-1-17 filter with approx.. 62,700 CFM 6:1 air to cloth ratio, 10,455 [...] of effective filter area using (697) filter bags (in a 41 x 17 grid pattern) at 120"" long, 6"" dia. filters; top bag removal & maintenance via large weather-proof access doors into return air plenum. --Main Fan/PD Blower: NEW YORK BLOWER floor mounted with belt driven 2... mehr
1
Elect./Voltage: 230/460 V, 60 Cy 3 Ph Uxuluzp7n STACLEAN 204-10-A Dust Collector w/Pulse Jet Cleaning; 12,500 CFM 4:1 air to cloth ratio, 3,124 sq/ft of effective filter area in walk-in plenum, (204) filter bags 120"" long. -- Main blower floor mounted with fan (connected on negative pressure, clean air side) belt driven 40 HP 1770 RPM TEFC motor; Fan inlet dia approx. 28""; Pulse jet cleaning of filter bags, (bags are changed from the clean side of the tubesheet. -- NOTE: Unit has suffic... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Ldofixav MICRO AIR `RP8-3` CARTRIDGE Modular Dust Collector. consisting of three modules. -- Unique ROTO-PULSE for better cleaning of cartridges. Air is pulsed into a special designed rotating set of (3) tubes made of aluminum with pre-drilled holes. Pressurized air enters the tube, the force of the pulse causes tube to [...] spinning this air exits the pre-drilled holes. The result is like (3) air knives covering the whole inside of the cartridge thus... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bav03ticii MAC 144-MCF-255 Baghouse Dust Collection system with Reverse Jet Bag [...] constructed of 7-gauge carbon steel containment; one piece body all welded construction, 120"" diameter shell walk-in plenum for maintenance and bag replacement. -- Baghouse Capacity: 33,200 CFM 9:1 Air-to-cloth ratio, 3,698 sq-ft of filter area made up of (255) Filter bags; 144"" long x 5"" dia.; 120"" shell dia. -- Equipped with: (1) Fan/motor with approx. 125 HP TEF... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yrocqk MAC 120-MCF-361 Baghouse Dust Collection system with Reverse Jet Bag Cleaning. -- Baghouse Capacity: 39,300 CFM 9:1 Air-to-cloth ratio (ACR), 4,368 sq-ft of filter area made up of (361) Filter bags; 120"" long x 5"" dia.; 120"" shell dia. -- Baghouse constructed of 10 gauge carbon steel containment; one piece body all welded construction, 144"" diameter shell walk-in plenum for maintenance and bag replacement. -- Equipped with: (1) NYB fan/m... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Ba2l2bmp0a HOCKER POLYTECHNIK MULTISTAR JQ 5/5 Pulse Jet Baghouse. Total 8,292 CFM based on 5.8 to 1 Air-to-cloth ratio with 1,430 square feet of filter area. Unit was used for polyester sanding and suitable for fine wood dust. -- Filtration: Existing specialized antistatic media is automatically cleaned by Pulse-Jet system based on supply of 1"" dia. dried clean compressed air line from plant. Cleaning automatically controlled via timed cycles or by t... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Uw0qbiisu BM CONCEPTION DUST COLLECTOR MODEL 60 -- Pulse Jet model -- 60 HP motor -- Soft start and control -- 10 feet diameter -- 65 feet height -- 147 bags -- Spare impeller mehr
1
Elect./Voltage: 240/480/575 V, 60 Cy, 3 Ph Eusxwbzii DONALDSON TORIT DALAMATIC- DLMC 2/4/15, [...] Collector (Pulse Jet) with high technology DURA-LIFE (envelope-shaped filter bags).. -- Specs: The filtration area is 1,290 sq/ft, made up of (80) bags arranged in (2) bands and (4) tiers. The design air volume range is CFM 5,160 - 14,190 CFM depending on application and Air-to-Cloth ration desired. -- Fan Systems: Suitable for (fan-motor not included) a floor mounted blower and motor about... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Uxumrnazq 14,000 CFM approx. 10 to 1 air-to-cloth ratio, Modular rectangular style dust filter with (120) tubes 118"" long, total filter area about 1,400 sq,ft. Manifold with diaphragm valves to supply the ""PNEUJET"" cleaning system. -- Supplied with KICE FA24 fan with 21"" inlet dia. and a 25 HP TEFC motor; high entry inlet; constructed of heavy gauge steel with sloped hopper with inspection door; access platform; discharge auger. -- PD pump is no... mehr


jet jwl 1442
täglich

Neue Maschinen per Mail!

Informiert werden!
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Mdhsl FLOW - BENGAL Water Jet, -- 2' x 4'. -- 11 HP. -- 40,000 PSI Pump. -- X-axis 39.3"". -- Y-axis 19.6"". -- Z-axis 6"". -- Programmable feed rates 0 - 300 IPM. -- Max stroke rate 890/Min. -- Pump type 11 HP Direct Drive. -- Pump pressure 40,000 PSI. -- Flow rate 0.84 GPM. -- Minimum inlet water 1.5 GPM 30 PSI. -- Electrics 200/220 Volts. -- Weight 5,800 Lbs. -- Dimensions 102"" x 60"" x 60"" high. mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Woknw CALYPSO Hammerhead 105 CNC Waterjet Machine -- Work envelope 61"" x 121"" x 6"" z axis. -- KMT Streamline SL-V60 Plus intensifier pump. -- Pump pressure 60,000 PSI. -- Pump size 60 HP. -- Hopper size 500 Lbs. -- Approximate weight 8,000 Lbs. -- Approximate dimensions 6' x 11'.Equipped with: -- Calypso Windows based PC with Geomate nesting software. -- Ebbco abrasive removal system. -- Ebbco closed loop water filtration system. -- Hours 12,74... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Fk27mav 2005 CALYPSO Hammerhead 510 Waterjet System -- Work envelope 5’ X 10’. -- Bridge gantry x-y table on uni-frame. -- Servo controlled z axis, with auto tool lift and nudge jog -- Fully sealed bellow system -- 60 HP 60,000 PSI KMT intensifier pump. -- 800 Lb. bulk abrasive hopper. -- Calypso Windows 10 Based PC CNC controller (fully updated in 2017 to the Mark IV controller). -- Calypso’s exclusive software suite – from d... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 9az7pshof FLOW 4' X 8' IFB 4800 Waterjet -- Setup with an accustream cutting head. -- Setup with an accustream abrasive regulator. -- 50 hp 60,000 psi intensifier pump. -- Upgraded to version 6 software. -- Flow software included on machine for programming and offline external single user license and software included. -- Tank has 8 steel boxes inside that can be pulled for easy cleaning with a forklift. -- Hopper and extra garnet ect. -- All equip... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. 7mxs2y0c3 FLOW INTERNATIONAL I-6024 CNC Waterjet(2) Tables (6' x 12'), cut envelope is 5.9' on X-axis, by 23.9' on Y-axis, and 8"" on Z-axis; motorized Z-axis. -- 50 HP Intensifier delivering a max. cutting pressure of 60,000 PSI, Integrated Flying Bridge (IFB); rapid traverse max. 500 IPM, contouring range 0 - 300 IPM. -- X- & Y-Axis utilize a ball screw with driven nut, recirculating ball; linear bearings and hardened precisions ways. -- Digital AC S... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Baohfbd30n BYSTRONIC BYJET SMART 3015 Dual Head CNC Waterjet -- Cutting range 120"" x 60"" x 9"". -- Cutting heads (2). -- Minimum cutting carriage spacing 8.6"". -- Maximum cutting carriage spacing 59.1"". -- X-Axis positioning speed 787 IPM. -- Y-Axis positioning speed 787 IPM. -- Simultaneous positioning speed 1,102 IPM. -- Z-Axis positioning speed 472 IPM. -- Positioning accuracy + 0.003"" -- Repeatability + 0.001"" -- Maximum load per suppo... mehr
1
Elect./Voltage: Q7ex8m9z FLOW INTERNATIONAL IFB6012:87K CNC Flying Bridge Water Jet -- Cutting area, X-Axis Bridge 6'. -- Cutting area, Y-Axis base 12'. -- Cutting area, Z-Axis head 8"". -- Cutting thickness, max. 6"" to 7"". -- Contouring range 0 to 300 IPM. -- Water table overall dimensions 168"" x 102"". -- Floor space required 20'10"" x 13'6"". -- Overall machine height 7'1"".Equipped with: -- FlowMaster Windows based PC control w/console. -- Integrated Flying Bridge. -- Hy... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. 82tgska0y FLOW CORP IFB-6012 CNC Waterjet -- Cutting Area: 6' x 12' -- Pump pressure: 55,000 PSIEquipped With: -- 7XD-55 Dual intensifier pump -- Servo control -- Flow software -- Garnet hopper -- Cutting jewel/diamond head mehr
1
Elect./Voltage: Yrlhzg Flow Mach II 4020B Waterjet Cutting System -- Controller Flow. -- Work envelope: 157"" x 78"". -- Max operating pressure 60,000PSI. -- Pump: 30 HP Hyplex prime direct drive pump. -- Abrasive hopper capacity 500 Lbs. -- Max speeds 400 IPM. -- Cutting head Paser. -- Dimensions 165"" x 86"". -- Weight 8,000 lbs. mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Baohexsxgm KMT STREAMLINE PRO II 60 CNC Waterjet Machine -- Work envelope 8' x 10'. -- Pump KMT 90,000 PSI. -- 60,000 psi (4,137 bar) 1.10 gpm (4.16 L/min). -- 85,000 psi (5,860 bar) 0.73 gpm (2.76 L/min). -- 16,000 psi (1,103 bar). -- With cutting head valve open 85,000 psi (5,860 bar). -- With cutting head valve closed 90,000 psi. -- Air requirements 85 psi - 100 psi. -- Maximum flow rate 1.0 cfm (0.028) m3/min. -- Cutting water supply c... mehr
1
Elect./Voltage: 400/440 V, 50/60 Cy, 3 Ph. Clsiqsgs JET EDGE 48XY CNC Water Jet Cutting System -- Work area on stationary table 120"" x 72"". -- Travels 120"" x 72"". -- Jet cutting pressure 50,000 PSI. -- Approximate dimensions 174"" x 120"" x 130"". -- Approximate weight 15,000 [...] with: -- Utilization 31,143.5 hours of operation / under power now. -- XYCOM automation control with Allen Bradley drives. -- (4) Jet heads mounted to traveling overhead gantry system. -- 30 HP Jet Edg... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. X20pj8y9 FLOW WMC-4040 Waterjet -- Control Flow. -- Table size 13' x 13'. -- Control flow. -- Pump 100 HP. -- PSI 60,000. -- Dual dynamic head. -- Work envelope 13.1 x 13.1. -- Pneumatic actuated Z axis 9.8, and effective usable travel 6.9"" travel. -- Rapid traverse 1375 IPM. -- Contouring max speed 1000 [...] with: -- Digital AC servo motors on all axis. -- Auto lube bearing blocks and nuts. -- (2) Dynamic heads for either dual or single opera... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Fn2ij7h FlOW Mach 2 M2-4020B Waterjet -- Control Flow. -- Size 6' x 13' -- Pump 30 HP. -- PSI 60,000. -- Head type Paser. -- Rapids 400 ipm. --Accuracy .001"" +/-. -- Dimensions 165"" x 85"". -- Auto lube. -- Roll around touch screen. -- Flowmaster software. mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ixflk0ix FLOW IFB-6012 Waterjet Cutting System -- Cutting area 6’ x 12’. -- Pump motor 50 HP. -- Pump pressure 60,000 PSI. -- Weight 8,000LBS. -- Approximate dimensions 8'6"" x13'6"".Equipped With: -- PC-based controller. -- Dynamic cutting. -- FlowPath, FlowCut software with computer. -- Hopper. -- Ebbco chiller. -- Additional cutting head fixture. mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. M9ejh INTERNATIONAL WATERJET MACHINE IWM2515H 4'x8' CNC Abrasive Waterjet Machine --Cutting envelope 4'x 8'. -- Pump (IWM) type intensifier 30 HP. -- Max pressure 55,000 PSI. -- X-Y Position accuracy is 0.06mm (0.002""). -- Repeatability is 0.03mm (0.001""). -- Over all cutting accuracy is at max 0.10mm (0.004""). -- Head pneumatically operated on/off valve, self-aligned. -- Maximum Abrasive flow rate 0.5kg/min (1lb/min). -- Compressed air source... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Oadpy90t Flow Mach2 2031B CNC Waterjet System -- Table size 6’6” x 10’2”. -- Travels 78” x 126” x 7”. -- 30SA 30 HP intensifier pump. -- 60,000 PSI high pressure system. -- X- & Y-Axis utilize a ball screw with driven nut, recirculating ball; linear bearings, and hardened precisions ways. -- Digital AC Servo motors with closed loop feedback; full protection package (covers & internal bellows) for drive system a... mehr
1
Elect./Voltage: 400/440 V, 50/60 Cy, 3 Ph. 7umxn8rbo Flow Waterjet Pro 1313 - 2007Machine Specifications: --30hp JPLEX pump --10,000-55,000 psi --CNC Controller --4.26 x 4.26 cutting table --X axis is 51.2 --Z axis is 8"" --cuts up to 6"" steel --440 volt, 3 phase, 80 amp --Hopper for media use --Custom water filtration systemHours: --793 mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Cdabqcck MITSUBISHI CLASSICA CL 3000 CNC WaterJet;5' x 10' Cutting area with 5"" thick cutting [...]: -- 60 HP WSI Intensifier pump with 60,000 PSI. -- MITSUBISHI ""700 Series"" control system with full featured operators panel and 2D CAD-CAM Software. -- Motors & Drivers: MITSUBISHI AC SERVO SYSTEM & Ball Screw. -- Supplied with and includes: EBBCO closed loop filtration system; includes abrasive hopper and chiller. mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Qveoie97 MITSUBISHI X4-612 Dual Head CNC Waterjet Machine -- Maximum cut size 72"" x 144"". -- Z-Axis travel 8"". -- Pump KMT Intensifier 125 HP. -- Intensifier pressure 90,000 PSI. -- Maximum speed 787 IPM. -- Accuracy/repeatability +/- 0.001"". -- Dimensions approximately 90"" x 180"".Equipped with: -- MItsubishi M700 CNC control. -- 3 Axis joystick. -- PCMCIA card & USB port. -- 10/100 Mbps Ethernet Connection -- Dual cutting heads. -- Auto t... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. C33s8auw FLOW IFB-6012 Waterjet Cutting System -- Cutting area 6’ x 12’. -- Pump motor 50 HP. -- Pump pressure 60,000 PSI. -- Approximate weight 9,000 Lbs. -- Approximate dimensions 8'6"" x 13'6"". Equipped With: -- Dynamic cutting. -- New Flow control and software. -- 600 Lb. Hopper. -- Servo control. mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Bzsynoj MITSUBISHI DX 3000 CNC Waterjet Machine -- 5' x 10' cutting area with 5"" thick cutting capacity. -- 60 HP WSI Intensifier pump with 55,000 PSI. -- MITSUBISHI ""700 Series"" control system with full featured operators panel and Medicam software. -- EBBCO closed loop filtration system, abrasive hopper, and chiller. -- Aproximately 1,000 hours. mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Hpnkv2t 2007 FLOW Stone Crafter 6012 Waterjet -- Control Flow. -- Weight x length 6' x 12'. -- X-Axis (bridge) 6.5'. -- Y-Axis (base) 12'. -- Z-Axis 8"". -- Maximum rapid traverse 500 in/min. -- Contouring range 0-150 in/min. -- Linear positional accuracy plus/minus 0.003"". -- Repeatability plus/minus 0.002"". -- Power 50-HP. -- Flow rate 1.00 gpm. -- Operating pressure 60,000 PSI. -- Dimensions tank 150"" x 84"". -- Arm 15' x 3'. -- P... mehr
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Etbbcsv FLOW 4020B Mach 2 Waterjet Cutting System -- Controller Flow PC based. -- Work envelope 157"" x 78"". -- Pump 30HP intensifier. -- Max operating pressure 60,000 PSI. -- Abrasive hopper capacity 500 LBS. -- Max speed 400 IPM. -- Cutting head Paser. -- Dimensions 165"" x 86"". -- Weight 8,000 [...] with: -- Flowmaster software package w/Flowpath & Flowcut. -- Fully programmable Z_Axis. -- Pre-water filtration system. -- Skid of garnet ... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Hpw22pu Flow IFB-612 WATERJET CUTTING -- Control Flowmaster 6.7. -- Pump HP 100. -- Max cutting pressure 60,000 PSI. -- Cutting work envelope 6' x 12'. -- Weight 8,000LBS. Equipped with: -- FlowMaster PC controller. -- Model integrated flying bridge. -- Single cutting head. -- Flow 100Hp dual ESL intensifier pump. -- Bulk abrasive hopper. -- Refurbished in 2016:. -- Machine cleaned and painted with marine grade coating. -- New PC and PMAC card... mehr
1
Elect./Voltage: Nuacdpw9 Flow IFB-6012 CNC Waterjet Cutting System -- Cutting area 6' x 12'. -- Pump pressure 55,000 PSI. -- 7XD-55 dual intensifier pump. -- CNC control. -- Flow software. -- Hopper. -- Cutting head. -- Approximate dimensions 8'6"" x 13'6"". -- Approximate weight 9,000 Lbs. mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Hjyjq9q MITSUBISHI SUPREMA DX510 5' x 10' CNC Waterjet Cutting System -- Travel 63” x 118” x 6”. -- Table size 5’ x 10’. -- Max workpiece dimensions 88"" x 165.7"" x 6.0"" -- Maximum material load 20,744 Lbs. -- Speed 787 IPM rapid travel. -- Control unit Mitsubishi. -- Program support & nesting function Metamation METCAM. -- Program input capabilities Ethernet, USB, PCMCIA card. -- Graphic display 15"" waterproof T... mehr
1
Elect./Voltage: 208/220 V, 60 Cy, 1 Ph 88fumbell FLOW INTERNATIONAL IFB-7212 CNC Waterjet -- Cutting Area 72"" x 144"". -- Z Axis 7"". -- Pump Horsepower 30 HP. -- Maximum Rated Pressure 55,000 PSI. -- Hopper Capacity 500LBS. -- CNC Windows Based Control. -- Pendant Display. -- FlowMaster 6.0. -- Flow Dynamic Contour [...] With: -- Dynamic Cutting Head. -- Flow Dynamic Contour Follower. -- 30 Horse Power Hyplex Direct Drive Pump. -- Water Only Option. -- Ebbco Closed Loop Filtr... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Rwdonstr FLOW WMC 4020 6' x 12' Dual Head CNC Waterjet System -- Work envelope 144” x 72”. -- Pump 100 HP (dual intensifier). -- Speed 400 IPM. -- Max operating pressure 60,000 PSI. -- Cutting head Paser. -- Approx. dimensions 13.5' x 7.5' (machine), 10' x 5' control & pump). -- Approx. weight 9,500 Lbs. Equipped with: -- Flow PC Based Flowmaster controller -- Flowmaster software package. -- Pneumatic Z-Axis. -- In pump water filtratio... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Ba3n0hn2ma WARDJET ZXL-2543 CNC Waterjet Cutting Machine -- Cutting area 98″ X 156″. -- Maximum water pressure 60,000 PSI. -- Motor 75 HP. -- Drive mechanism ballscrew driven on all axes. -- Linear positional accuracy ± 0.003"" per axis. -- Repeatability ± 0.001"" per axis. -- Speed 0.01 in/min - 500 in/min. -- Footprint 132″ X 223″.Equipped with: -- WardJet HyPrecision 75S -- Programmable Z-Axis. -- ... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbzbesr JET EDGE HR612 High-Rail Gantry-Type Water Jet Cutting System -- Travels 144"" x 72"" x 12"". -- High rail gantry tank 7' x 17' w/ bladder and slat kit. -- GE intensifier 60,000 psi. -- Bulk abrasive hopper 2500 Lb. cap -- Flow rate 1.1 gpm. -- Motor 50 hp. -- Accuracy +/- 0.001"". -- Contouring Speed 750"" / min. Equipped with: -- AC Brushless servo motors (dual motors on Y-axis drives) with closed loop drive system on x & y axes. -- Prelo... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bk9gai8g MULTICAM 3000 Series Z-204-W CNC Waterjet Machine -- Work envelope 5' x 10'. -- KMT ""Streamline Pro"" 60 HP pump. -- Pump pressure 90,000 PSI. -- Repeatability +/-0.001"". -- Accuracy +/- 0.005″ over 10'. -- Rapid traverse 1,400 IPM. -- Maximum cutting speed 1,500 IPM. -- Drives brushless digital AC servo. -- Drive system X & Y-Axis linear rack & pinion. -- Drive system Z-Axis precision ballscrew. -- Machine dimensions 6' x 11'6"".... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Hjoyllp TECHNI TJ4000-X3 6' x 12' CNC Waterjet Cutting Machine --Work envelope 6' x 12"". -- Cutting table size 6’1″ x 12’1″. -- Accuracy of motion +/- 0.001″. -- Repeatability of motion +/- 0.0005″. -- Max. air speed 700 IPM. -- Max. cutting speed 700 IPM. -- Max. material thickness 8"". -- Machine dimensions 16′ x 8′ 6″ x 6′ 8″. -- Machine weight (empty) 5,140 Lbs. -- Machin... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Ba3n0q9bab OMAX 60120 Waterjet Machine -- Travels 120” X 60” x 8"". -- Pump pressure 55,000 PSI. -- Pump motor 30 HP. -- Linear positional accuracy ±0.0010"". -- Repeatability ±0.0010"". -- Approximate weight 6,200 Lbs. -- Approximate dimensions 18’ 9” x 9’ 2”.Equipped with: -- Tilt-A-Jet head & software. -- Terrain following program. -- Omax PC control. -- Garnet system 600 Lbs. capacity. -- Soli... mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Dv0moq OMAX 55100 CNC Waterjet Machine -- Work envelope 100"" x 55"". -- Table size 126"" x 65"". -- OMAX ""P2040"" pump, 20 HP and 40,000 PSI. -- Programmable motorized Z-Axis. -- Precision X- and Y-axis rigidly mounted to the cutting table. -- Scissor-style hard plumbing, component protection against water, dirt, and grit. -- Rapid water level control for quiet and clean submerged cutting. -- Bulk abrasive delivery system transports garnet from th... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 3cg8t9i7 TECNIJET INTEC 612 CNC Waterjet Machine --Cutting area: 6’ x 12’. -- Accuracy: +/- 0.006"". -- Repeatability: +/- 0.002"". -- Pump Quantum NXT Servo 66,000 PSI. -- Max air speed 700 IPM. -- Ma. cutting speed: 700 IPM. -- Max material thickness: 8"". -- Machine size 16’ x 8’6"" x 6’8"". -- Machine weight 5,140 [...] with: -- Techni Intec 612 cutting table. -- Techni CNC control. -- Techni cutting software. ... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Sykkje8 OMAX 80160 Waterjet -- Control Omax PC based control. -- Table size 174"" x 89"". -- Travels 168"" x 80"". -- Slats 4"" x 1/8"". -- Motor 50 HP. -- Max cutting pressure 60,000 PSI. -- Cutting speed 180 IPM. -- Approx. overall installed dimensions 243"" x 134"" x 144"". -- Approx. shipping weight 10,000 lbsEquipped with: -- Omax PC based control. -- Integrated CAD/CAM software. -- Ebcco deionizer system. -- Tilt A jet taper compensating... mehr
1
Elect./Voltage: 9az7gbb0e ROMEO ENGINEERING 5x10 Silver Series Waterjet Cutting SystemsSpecifications: -- X axis travel 120.8"". -- Y axis travel 60.8"". -- Z axis 6.0"". -- Romeo windows based pc controller. -- 30 hp 60kpsi kmt intensifier pump. -- KMT autoline cutting head. -- Remote pump controls. -- Long life steel slat table. -- High pressure gauge. -- 500lb bulk abrasive hopper with under 6,000 hours. mehr
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Fh3rdfd BUSELLATO JET 4000 CNC MACHINING CENTER (W/ATC): -- Specifications: Working Cap. ""X"" Axis 126""(3,200 mm), ""Y"" axis 56.6""(1,440 mm), ""Z"" axis stroke is 11.8"" (300 mm), max. material thickness 5.9"" (150 mm). -- Positioning Speed:""X"" axis is 377 FPM (115 MPM), ""Y"" axis 246 FPM (75 MPM), ""Z"" axis 98 FPM (30 MPM) -- Worktable:(8) Pneumatically locking panel supports, (4) lifter rails for heavy panels, (4) ""MATRIX"" vacuum pods pe... mehr
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. 97wug3su9 BUSELLATO JET 6000 CNC MACHINING CENTER (W/ATC): -- Specifications: Working Cap. ""X"" Axis 126""(3,200 mm), ""Y"" axis 61.2""(1,550 mm), ""Z"" axis stroke is 15.7"" (400 mm), max. material thickness 7.8"" (200 mm). -- Positioning Speed:""X"" axis is 377 FPM (115 MPM), ""Y"" axis 246 FPM (75 MPM), ""Z"" axis 98 FPM (30 MPM) -- Worktable:(8) Pneumatically locking panel supports, (4) lifter rails for heavy panels, (4) ""MATRIX"" vacuum pods ... mehr
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. M9uab BUSELLATO JET OPTIMA C21 CNC MACHINING CENTER (W/ATC): -- Specifications:Working field ""X"" Axis 120"" (3,050mm); ""Y"" axis 51.1"" (1,300 mm); ""Z"" axis stroke 10"" (250 mm), max. material thickness 7"" (180 mm). -- Positioning speeds:""X"" & ""Y"" Axis 246 FPM (75 MPM ); ""Z"" axis 98 FPM (30 MPM).The ""X"" axis (long axis) uses a helical rack & pinion system, ""Y"" & ""Z"" axes use ball screws; all motion components are maintained by an aut... mehr


jet jwl 1442
täglich

Neue Maschinen per Mail!

Informiert werden!

bis

bis

Suche verändern
JET JWL 1442
SOFORT VERKAUFEN
bei Europas Marktführer ab 0,79 € pro Inserat.
Jetzt Informieren


Tel: +49 (0) 201 857 86 112
oder sofort verkaufen
Jetzt Maschinensucher-App testen!
Maschinensucher-App für iPhone und Android.
Wollen Sie den Chat-Verlauf wirklich beenden?
Ja Nein
×
Maschinensucher-Chat
Name E-Mail Ihre Nachricht an den Händler
CHAT MIT HÄNDLER STARTEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Partner tippt gerade
NACHRICHT JETZT SENDEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Chat-Partner scheint inaktiv zu sein.
Chat Fenster Schließen