Euclid r 32 gebraucht kaufen

Erkannter Standort: Ashburn (US) (anpassen)
Adresse angeben
oder
verschieben
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Uxl0ccdix TRUMPF 357-TON x 13' TRUMABEND 4-AXIS CNC HYDRAULIC PRESS BRAKE. -- Specifications: Max. bending length 161.5"", capacity (357) tons, distance between housings 145"", stroke 14"", throat 16"", open height 21"". -- Equipped with: 4-Axis CNC backgauge. -- Machine is in like new condition with low Hrs. mehr
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. M90cn HOLZ-HER 1321 Sprint ... Edgebander with Pre-Milling & Corner Rounding. -- Working Capacity:0.3 - 15 mm Thickness edgebanding capability (3 mm coil or 15 mm max. strip). -- 6 - 50 mm Panel thickness, workpiece width min. of 60 mm; workpiece Length min. 180 mm; Feed speed 12.5 MPM (41 FPM).Front-End Configuration: -- Pre-Milling Station ""1961"": (2) 2.0 kW - 12,000 RPM motors; With digital readouts for accurate positioning. -- ""1903"" Edgestrip... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bawwoopjqx FELDER G 320 SINGLE SIDED EDGEBANDER.05 mm to 3mm PVC , and [...] feed with offset rollers to keep the panel against the fence and [...] thickness capacity from 0.4- to - 3.0 mm. Edging width from 10-45 mmEquipped with: -- Automatic glue station with full temperature control -- 5.5 meters per minute feed [...]: -- Double end trim via single motor and 2 saw blades. -- Top and Bottom trimming station with fine micro adjustments -- Top an... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Vnnuu0qzd HOLZ-HER - 1321 Sprint, [...] with Pre-Milling & Corner Rounding.0.3 - 15 mm Thickness edgebanding capability (3 mm coil or 15 mm max. strip); 6 - 50 mm panel thickness, workpiece width min. of 60 mm; workpiece length min. 180 mm; Feed speed 12.5 MPM (41 FPM). -- Programmable Logic Control (PLC) for Edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Programs can be easily creat... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 02tbacu HOLZ-HER 1321 Sprint Edgebander with Pre-Milling & Corner Rounding. 0.3 - 15 mm Thickness edgebanding capability (3 mm coil or 15 mm max. strip). -- 6 - 50 mm Panel thickness, workpiece width min. of 60 mm; workpiece Length min. 180 mm; Feed speed 12.5 MPM (41 FPM). -- Programmable Logic Control (PLC) for Edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and [...] can be easily created and recall... mehr
1
Elect./Voltage: Sss3ws BROTHER TC-323 CNC Drill and Tap MachineSpecifications: -- X 16.5"". -- Y 11.8"". -- Z 9.8"". -- Table size 19.7"" x 11.8"". -- Spindle taper #30. -- Tool changer 10. -- Spindle speeds 6,000 rpm. -- Rapid feed 1181 ipm. -- Tool to tool 1.5 seconds. -- Main motor 5.5 [...] with: -- Brother CNC 520 control. -- Coolant pump and tank. -- Pallet shuttle. -- Misc manuals. -- Machine weight 6400 lbs. mehr
1
Elect./Voltage: M2fsr BROTHER TC-323 CNC Drill and Tap MachineSpecifications: -- X 16.5"". -- Y 11.8"". -- Z 9.8"". -- Table size 19.7"" x 11.8"". -- Spindle taper #30. -- Tool changer 10. -- Spindle speeds 6,000 rpm. -- Rapid feed 1181 ipm. -- Tool to tool 1.5 seconds. -- Max tool dia, length, weight 3.14""/7.87""/6.61 lbs. -- Main motor 5.5 [...] with: -- Brother CNC 520 control. -- Coolant pump and tank. -- Pallet shuttle. -- Misc manuals. -- Chip Conveyor. -- Machine weig... mehr
1
Elect./Voltage: 240/480/575 V, 60 Cy, 3 Ph Cfzyxbk TORIT 232RFW12 Dust collector. 28,900 CFM at 8:1 Air-to-cloth ratio, 123"" dia. round Baghouse.(232) Cloth filter bags of 12' length, 3,622 sq ft of filter area (oval bags provide for radial movement of bag during cleaning for longer life). -- 100 HP TEFC motor, platform-mounted fan/motor. -- Reverse Air filter cleaning is by a 5 HP medium pressure air pump (eliminates the need for compressed air which can be susceptible to condensation an... mehr
1
Elect./Voltage: 230 V, 60 Cy, 1 Ph. 9fzicgauz BROTHER TC-32A CNC Drill/Tap CenterSpecifications: -- X axis travel 17.71"". -- Y axis travel 12.59"". -- Z axis travel 16.14"". -- Distance from table to spindle 7.87""-24.01"". -- Table size 21.65""x13.77"". -- Max load weight 176 lbs. -- Spindle speeds 12-12,000 rpm. -- Spindle taper hska40. -- Spindle drive 7.5 hp/5 hp. -- Rapid traverse 1968 ipm. -- Cutting feed 787 ipm. -- Machine dimensions (approx) 130""x70""x93""h. -- Machine... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Mroxv STRANSTEEL Stationary 8' x 32' Counterflow Mineral and Aggregate Dryer with the following features: -- Gravity feed Inlet w/bypass chute. -- Chain Drive Dodge TXT Reducer (No Motor). -- HAUCK Burner (Missing Plate). -- 75 HP Motor on Blower. -- Drum Flighting is in ""Fair"" Condition. -- Trunnion Wheels and Drum Steel Tires in ""Good"" Condition. mehr


euclid r 32
täglich

Neue Maschinen per Mail!

Informiert werden!
1
Elect./Voltage: DIESEL POWERED Wnqlbbgce MORBARK 632 - Debarker, Diesel Powered;Has a 20 ft. in-feed and out-feed troughs, -- 250 HP CUMMINS power unit, -- 20 ft. MORBARK Hyd. Live deck with 2-arm stop and loader and (4) legs. -- Also includes (2) MORBARK electric bark conveyors, 20 ft. and 30 ft. mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cqz89p9rc TIMESAVERS ""4321-45-01"" Wide Belt Sander; 2-Head, 43"" max. width [...] configuration: -- 1st Head: 9-1/2"" Dia. rubber covered contact roll, 40 HP motor. -- 2nd Head: Combination head with 6"" dia. rubber covered contact roll, and 2-1/2"" wide finishing platen with dial indicator, 30 HP motor. -- 52"" x 103"" Abrasive belts with dual ""Posi-Trak"" electronic solid-state tracking; conveyor belt feed with AC inverter variable feed from 15 - ... mehr
1
Elect./Voltage: 240/480 V, 60 Cy, 3 Ph 8za3bp2gq VIET CHALLENGE 321B Wide Belt Sander (3) Heads: --43"" Width cap. Drum, Drum, Platen --Head Configuration: --1st Head: Rubber covered contact roll 7-1/2"" dia. (90-shore), 15 HP motor; --2nd Head: Rubber covered contact roll (65-shore) 15 HP motor --3rd Head: Segmented polishing platen with (25) individual segments, computer controlled to conform to any panel shape to minimize veneer sand throughs, 20 HP motor. --Specifications: -- Ou... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ssx9p8 TIMESAVERS 2321-45-01 Wide Belt Sander --2-Head, 51"" width cap. with (1) contact roll, and (1) combination head with contact roll and finishing platen. -- 1st Head: Rubber covered contact roll, 8"" dia., 30 HP motor. -- 2nd Head: Combination head with a rubber covered contact roll 5-1/2"" dia. and 2-1/2"" wide segmented finishing platen, 25 HP motor, (2) dial indicators for contact roll height adjustment. -- 52"" x 103"" Abrasive belts, ""Posi-Tr... mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Yoteu8r02 JENKINS SET 3202 CNC Shape and Sand for Arch Doors [...] Return Conveyor;CNC controlled Feed Through Shape and Sand machine with Return Conveyor [...] with: -- Infeed side: Approx 30"" minimum infeed loading area. -- Fence positioning: CNC Auto-positioning by servo motor ball screw system with digital feedback. -- Hold Down: Adjustable, CNC Servo powered, spring loaded double belt holddown on adjustable beam with electronic feedback of position... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Cdr7wtug 126"" (3,200 mm) Cutting length, 3.94"" (100 mm) cutting height, motorized back fence from 1"" - 31-1/2"" cap. fence travels on hardened ways, 0.5 HP motor, LED readout for fence positioning & fine adjustment by front mounted hand wheel. -- Equipped with: Hydraulic pressure beam-and-knife powered by 10 HP hydraulic pump motor, 6"" wide pressure beam with cutting force adjustment for beam-and-knife, beam assembly with self-lubricated slide ways. ... mehr
1
Elect./Voltage: 230 or 460 V, 60 Cy, 3 Ph 7r77ipum9 VECOPLAN RG 32/20 Z Shorty, Low Noise Single Shaft Waste Grinder; 32"" x 30"" Opening Waste Grinder with 35"" height vertical hopper (1.5 cub. yard cap.), 20 HP rotor motor. -- Equipped with: 6"" Dia. and 27-1/2"" length rotor with (15) indexable, replaceable cutter knives, rotor/cutterhead grinds at approx. 235 RPM. -- Hydraulic pusher ram with 1.0 - 1.5 HP two-speed pump motor, separate electrical control panel with push button control... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Oo7kxi2j RETECH RG 32/20U Low Noise Grinder w/Vertical Hopper Feed. -- Equipped with: (1.5) Cu. yds. capacity hopper, 20 HP premium efficiency rotor motor, power belt drive; 10"" dia. high output ""Torsion Point"" cutting rotor with a lifetime limited warranty. -- 32"" x 40"" Cutting Chamber; rotor/cutterhead grinds at 95 RPM, floating mount gear box, average noise level 60 - 70 dbA; (20) concave profile, 4-way indexable, hardened replaceable cutter ... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 7mxsshuo2 VECOPLAN RG 32/20 Z Shorty, Low Noise Single Shaft Waste Grinder; 32"" x 30"" Opening Waste Grinder with 35"" height vertical hopper (1.5 cub. yard cap.), 20 HP rotor motor. -- Equipped with: 6"" Dia. and 27-1/2"" length rotor with (15) indexable, replaceable cutter knives, rotor/cutterhead grinds at approx. 280 RPM. -- Hydraulic pusher ram with 1.0 - 1.5 HP two-speed pump motor, separate electrical control panel with push button controls, 80 ... mehr
1
Elect./Voltage: M0cxh LEBLOND 3220 Engine LatheSpecifications: -- Swing over bed 32”. -- Swing over slide 20 ½”. -- Max center distance 96”. -- Spindle nose l2. -- Spindle bore 2”. -- Spindle speeds 36 high, 36 low. -- Tailstock taper #5MT. -- Width of bed 25”. -- Width of carriage 40”. -- Threads 60 changes from 1 to 60 tpi. -- Feeds 60 changes from .0045 to 269 ipr. -- Main motor 30 hp. -- Approx weight 14,000 ... mehr
1
Elect./Voltage: Uw38ypq NATIONAL LAP-32 -120 Engine Lathe Specifications: -- Swing over bed ways 32"". -- Swing over cross slide 26"". -- Bed way width 26"". -- Center distance 120"". -- Spindle hole 9"". -- Spindle speeds (12 steps) 5 to 300 rpm. -- Spindle nose a-15. -- Chuck size with 9"" hole 25"" 4 jaw. -- Chuck size with 9"" hole 24"" 4 jaw. -- Feeds long. (40) .0024 to 1.453 ipr. -- Feeds cross (40) .008 to .488 ipr. -- Threads inch (50) 1 to 60 [...] -- Threads metric (41... mehr
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. 38p3jlfnz BOSS MACHINERY PT3200TA Sliding Table Saw.3,100 mm (122"") cutting length with scoring. -- Anodized aluminum sliding table with tracking by roller bearings, locks for easy panel loading in (1) positions. -- Equipped with: 7.5 HP Main motor, max. 400 mm (15-3/4"") saw diam. with 30 mm arbor, 130 mm (5"") depth of cut at 90°, 91 mm ( 3-1/2"") depth of cut at 45°. -- 0.75 HP scoring saw motor; 120 mm (4.72"") dia. blade having 15 mm (0.59"") ar... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 3yytghggz HOMAG CH-03 Front Load Panel sawSpecifications & features: Cutting length 3,200 mm (126""), pusher stroke 98"", cutting height 2"" with 11-3/4"" dia. blade; 7.5 HP main and 0.75 HP scoring motor, 5,100 RPM main & 5,500 RPM scoring blade. -- Saw carriage travel 20 - 105 FPM, return speed 105 FPM, powered by 0.75 HP motor; automatic carriage return (no programming), sensor indicates when saw is through cut and blade retracts & carriage returns.... mehr
1
Elect./Voltage: 8epltlrii ROBLAND Z 3200 Sliding table SawFeatures: 126"" Crosscut cap. with swing arm support and scoring capability. 16"" Max. saw blade with a 3-3/4"" max scoring blade. -- Manual tilt of the arbor from 0° to 45°, 4-34"" max. depth of cut at 90° and 3-3/4 max depth of cut at 45°, and a 54-1/4"" rip cut capacity to the right of blade. -- Equipped with: 7.5 HP main motor, 0.75 HP scoring motor, (3) blade speeds of 3,000, 4,000 & 5,000 RPM, 60-14"" x 27-1/2"" table and a 1... mehr
1
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. 3klk93ypc HOMAG CHF 320 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:149.6"" (3,800 mm) Cutting length, 149.6"" (3,800 mm) pusher stroke, 12 HP (9.2 kW) main & 1.5 HP (1 kW) scoring motor, 2.8"" (72 mm) max. Saw blade projection, 13.7"" (350 mm) dia. main saw blade, 4,750 RPM main blade & 5,100 RPM scoring bladeManual scoring blade adjustment from outside the machine. -- Saw Carriage:""Silent Drive"" Saw carriage to allow high speed with vir... mehr
1
Elect./Voltage: B90yaumw SAC CS-40-3200 Sliding Table SawSpecifications & features: 3,200 mm (126"") Cutting length w/scoring, anodized aluminum sliding table 13"" x 131"", locks for easy panel loading in any position. -- Equipped with: 45° Tilting (30 mm) main saw arbor, 400 mm (15-3/4"") blade dia., 130 mm (5.1"") max. cut height 90° - 100 mm (3.9"") 45°; 1,500 mm (59"") rip cap. -- 9 HP Main saw self-braking motor, (3) cutting speeds 2,600 - 4,000 & 5,600 RPM, 1.0 HP scoring saw moto... mehr
1
Elect./Voltage: 3tgiuuyan HOMAG SAWTECH OPTIMAT CHF 325 CNC Panel Saw. -- Cutting length: 3,250 mm, pusher stroke 3,250 mm, 72 mm (2-7/8"")"" max blade projection with 350 mm (13.7"") dia. blade. -- 12 HP (9.2 kW) Main & 1.5 HP (1.1 kW) scoring motor, 4,750 RPM main blade & 5,100 RPM scoring blade. -- Equipped with: Saw carriage travel of 0 - 197 FPM (0 - 60 MPM) & return speed of 197 FPM (60 MPM), powered by electronically controlled AC inverter drive; quick blade changes facilitated b... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Giqy3oupe HOMAG CH 03/32/25 Panel Saw, Horizontal Front Load;Cutting length 3,200 mm (126""), pusher stroke 98"", cutting height 2"" with 11-3/4"" dia. blade;Specifications: -- 7.5 HP Main and 0.75 HP scoring motor, 5,100 RPM main & 5,500 RPM scoring blade. -- Saw carriage travel 20 - 105 FPM, return speed 105 FPM, powered by 0.75 HP motor; automatic carriage return (no programming), sensor indicates when saw is through cut and blade retracts & carriage ... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Iwemn9n HENDRICK PATRIOT SRP 3200 Panel Saw, Front Load and Computer Controlled:126"" (3,200 mm) Cutting length & pull back cap.; 10 HP arbor motor for main & scoring saw; 3"" saw blade [...] & Feed: -- Variable saw carriage travel speed from 0 - 130 FPM (0 - 40 MPM), return carriage speed of 130 FPM (40 MPM). -- Programmable pusher fence with (6) material grippers; 0 - 130 FPM (0 - 40 MPM) forward positioning speed, 130 FPM (40 MPM) return speed. -- P... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. D3vyb3trm CALIFORNIA PELLET MILL, Model PM7932-12, Pellet Press (pellet mill) complete with the following components and features: -- Modern Gear Driven Pellet Mill. -- Feeder with Drive. -- 450 HP, 1800 RPM Main Drive. -- 5807 ML Frame. -- Spare Parts. -- OPTIONAL ITEMS &#9679 Die Hoist &#9679 Vibration Pad. -- NOTE: Two of these identical machines are available. See our listing PT-010449 for the other one. mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. X2gq9m0an HOLZMA HPP-81 CNC Front Load Panel SawSpecifications & Features: -- 3,200 mm Cutting length (126""), 85 mm (3.3"") cutting height, 18 HP (13.4 kW) main and 3 HP (2.2 kW) scoring motor. -- Variable saw carriage travel speed 0 - 229 FPM (0 - 70 MPM), constant return of 229 FPM ( 70 MPM). Equipped with: -- Electronically controlled overhead program fence, rack and pinion driven on both sides, forward speed 131 FPM (40 MPM), return speed 131 FPM ... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 88xs233 HENDRICK NRS 3200 Overhead Rail Saw w/Tilting BladeSpecifications: 10' Max. length of cut, 16"" max. blade dia. cap., 4-1/2"" + max. depth of cut with 16"" dia. blade and 1"" bore; 1-1/2"" - 2"" max. depth of cut at 45°; 1"" dado cap. -- Lower link blade guard assembly, 7.5 HP - 3,470 RPM main motor; push-button magnetic control; saw head bevels 0 - 45° and tilts 0 - 90°. -- Features: Saw carriage rides on heavy duty hardened rail with ball beari... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Baq7joo9po HOMAG CH 12/32/32 Front Load Auto. Panel Saw -- Cutting length 3,200 mm (126""), pusher stroke 3,200 mm (126"") behind cutting line, max. 400 mm (15.8"") dia. blade, 100 mm (3.93"") saw blade projection). -- Features: 8.9 kW (12 HP) Motor for main & 1.1 kW (1.5 HP) for scoring blade, 3,900 RPM main & 5,300 RPM scoring blade, saw carriage travel 6 - 32 MPM (20 - 105 FPM), return speed 32 MPM (105 FPM), powered by .55 kW (.75 HP) motor. --... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yilba73pm BURKLE ODW 2332/60 Feed Through Press Line:Platen dimensions of 2,300 (90.5"") x 3,200 (126"") drilled steel, maximum press surface 6,2 m² with loading on the 2,300 mm (90.5"") side. -- Infeed Conveyors: (1) 86-1/2"" x 78"" and (1) 86-1/2"" x 228"". Powered belt feeds into Press. -- Single Daylight Press, 150 mm (5.9"") opening, end loading on 86-1/2"" side. Specific pressure on the maximum pressing area 60 N/cm2 (87 PSI); Total pressure 3,754 ... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Bnsuean8 OTT D 99/325 FEED THROUGH PRESS SYSTEM, with Platen dimensions of: 63"" x 130"", 5.9"" Single daylight opening, end loading on 63"" side with an automatic Mylar belt loading & unloading system. -- Equipped with: (6) 160 mm Dia. downstroke hydraulic cylinders plus (2) movement cylinders, 10 hp hydraulic motor, 325 tons of total pressure, 100 PSI specific pressure based on a 5' x 10' panel, 1.5"" thick solid steel press platens. -- Complete with: ... mehr
1
Elect./Voltage: 400 V, 50 Cy, 3 Ph. Cpap32su Cortaza Multi Daylight Press with 8 OpeningsCortaza is a heavy duty press made in Europe. The press is a multi-daylight with heated intermediate [...] Specifications: -- (8) Daylights. -- 3200 x 1550 mm (126"" x 61""). -- (6) Cylinders. -- Diameter of the Cylinders 200 mm (7-7/8""). -- Pressing at 9 Kg/cm² (128 psi)This machine has been rebuilt, this includes taking the machine apart, rebuilding wear items, repainting and testing prior to ... mehr
9
SCM RECORD 132 TV Serien-Nr.: AA1/013806 Jahr von Manu: 2003 Bumgee8i 02.09.24 RECORD 132 TV 14.15.28 ZENTRALE AUSPUFFANLAGE 35012104 4 X ANHEBENDE UNTERSTÜTZUNG 55.00.11 UNIVERSAL K2 88051712 SUPPLEM. TV-ABSAUGUNG 160 X 70 A/4077 X ACHSEN STRICHE = 3400MM mehr
6
Used Prima Platino 1325 2.5kw CNC Laser 2.5kw / 2500 watt Year of manufacture: June 2001 2 x cutting heads Cutting bed: 2.5metre x 1250mm Glassware / Optics replaced last year Fully service history / Good condition Can be seen working Foot print 10.5metre x 5.5metre 2 lenses: 5? and 71/2? Last service that took place: July 2017 Fully Serviced (every 11 months) Most recent information: Dvhlt3r Last service that took place: July 2017 New Hyper pulse board fitted July 2017   mehr
1
2000 Katze 320B 700 mm Pads, CV c/w a/c - B1XS01019 Bbgjxfzmqa Diese Maschine wird auf einer uneingeschränkten Auktion in Dubai, VAE, am 5. März 2018 von Euro Auktionen verkauft werden. Wenden Sie für weitere Informationen sich an unsere zentrale. mehr
5
Max. Bearbeitung von Durchmesser: 1-1/4"(32mm) Max. Länge pro Aufspannung Bearbeitung: 12,8" Main Spindeldrehzahlen: 200-8000 u/min Rotary Tool Geschwindigkeiten: (Turm & Bande Platte): 250-5000 u/min Bbjsbk2vcb mehr
1
FANUC Oi-TD Umlaufdurchmesser über Bett Ø 1030 mm Cross-Folie über Swing Ø 800 mm Hydraulische Spannfutter Größe 21" Max. Dreh Ø 900 mm Bearbeitungs ø max. 3200 mm Bar arbeiten Ø 139 mm Reisen X / Z 470/3270 mm C-Achse 0,001 ° Drehzahlen Spindel ~ 1500 u/min Spindel-motor 37/45 kW Spindelnase ASA A2-15 Spindel durch Loch Ø 152 mm Anzahl der Stationen auf Werkzeugrevolver 12 Stromschnellen X / Z 12/10 m/min Drehwerkzeug Spindeldrehzahlen ~ 3000 u/min Pregrammable Reitstock MT-6 Ø ... mehr
7
Säulenbohrmaschine mit programierbare Funtionen Wie Drehzahl Vorschub und Steigung Automatischer Auswahl von Drehzahl und Steigung bei Eingabe von Diameter uns Material Auch Gewindeschneiden mit vorwahl von Steigung Drehzahl 55-5000 TPM Boorkap. in St60 ø32mm in GG20 ø40mm Gewindeschneiden in ST60 M24 in GG20 M30 Spindelaufnahme MK4 Rm3nbq3t mehr
6
Kraftstofftyp: Diesel Verwendungszweck: Geländeverwaltung Leistung: 25 kW (34 PS) Mxesd Schneideinheiten: 3 mehr
1
-Laminieren Geschwindigkeit: 40" pro minute -Temperaturbereich: 75-130° C -Aufheizzeit: Ca. 5 Minuten -Fütterung Papiervorrat: 100 Blatt (Einstellbare Breite) -Digitale Blattgrößen: Brief (8,5 "x 11"), Tabloid (11 "x 17"), digitales Papier (12 "x 18"), digitales Papier (13 "x 19") Bbiwpgdifr -Trimmen Methoden: Flush trimmen oder edge-Dichtung -Bedienfeld: LCD-Display für Start, Stopp, Temperatur, Geschwindigkeit, führenden und Hinterkante Seite schneiden Trimmeinstellungen -Weitere Featu... mehr
4
Fronius Transpuls Synergic 3200 Crni Ausgabe wird Schweißen, Edelstahl, Stahl oder Aluminium. VR-4000 Wirefeeder Einheit. Wasser-Kühler Einheit unterhalb der Powersource. Verkauft mit Fronius digitale Fackel, so macht veränderte durch Schweißer, anstatt zu Fuß zur Stromquelle sein kann. (höhere Produktivität) Dieses Set wurde immer gepflegt. Spätestens 2017-Software-Update und regelmäßige Kalibrierung Dienstleistungen von Fronius. Zuvor wurde von Besitzer verwendet, so ist dieses Schweißge... mehr
6
Planscheibendurchmesser 3200 mm Umlaufdurchmesser 5100 mm Drehhöhe 2505 mm Querbalken - Verstellung 1500 mm Stößelhub - max. 1250 mm Supportverstellung 2000 mm Steuerung Siemens 8 T Werkzeugwechsler 16 STK Tischbelastung 60 t Planscheibendrehzahlbereich - stufenlos 0,8-100 U/min Vorschub 0,0 1-1000 mm/min Eilgang 6000 mm/min Hauptspindelantriebsleistung 75 kW Latmp Maschinengewicht ca. 70 t Raumbedarf ca. 9,3 x 6,1 x 6,0 m Maschine ist in einem exzellenten Zustand!! Die Maschine kann wahl... mehr
6
Bohrleistung in Stahl (Durchmesser) 32,0 mm Ausladung 900 mm Spindelaufnahme MK 4 MK Drehzahl 100 - 1.120 U/min Tischaufspannfläche 1200 x 580 mm Einbauhöhe 600 mm Blamp9a Gesamtleistungsbedarf 1,4 / 1,8 kW Maschinengewicht ca. 2.200 kg. Ausstattung: - elektr. Bohrkopfhöhenverst. 320 mm - hydr. Zentralklemmung über Taster - Gewindeschneideinrichtung - automatischen Vorschub beim Bohren - Bohrtiefenanzeige mit Endanschlag - Kühlmitteleinrichtung mehr
1
Schnittdurchmesser:320 mm Sägeblattlänge:620 mm Hub:400 mm Gehrungsschnitte - beidseitig:45 ° Hubgeschwindigkeit:40 - 115 m/min Gesamtleistungsbedarf: kW 8b0wwfpm Maschinengewicht ca.:1 t Raumbedarf ca.:1,0 x 0,6 x 1,2 m mit Kühlmitteleinrichtung Gehrungsschnitt mehr
4
Dieses Angebot gilt für ein Jahr 2006 volumetrische Füllmaschine mit Fußpedal. BAUSCH + STRÖBEL-EDM3295 ist ein zweiköpfiger Semi automatische Verschließmaschine mit einer maximalen Leistung 4.000 Füllung Zyklen pro Stunde ist. Pkyofiox mehr
2
Baujahr: 2006 Steuerungsart: MC4 Spritzeinheit: .../2700 Schneckendurchmesser: 70 mm Bbjirlmksf Spritzgewicht in PS: - g Schließeinheit: 320/... Schliesskraft: 320 t Größe der Aufspannplatten: 1060 x 1095 mm Lichter Holmabstand: 710 x 710 mm Hydr. Antriebsleistung: 110 kW Zylinderheizleistung: 47 kW Allgemeine Informationen: Lieferzeit: Kurzfristig Masse(m) LxBxH: 6,3 x 2,25 x 2,13 m Gewicht: 17000 kg Ausrüstung: - 2 x Luftventil - 3 x Kernzug ​- Schnec... mehr


euclid r 32
täglich

Neue Maschinen per Mail!

Informiert werden!

Stöbern Sie durch die beliebtesten Maschinentypen:

bis

bis

Suche verändern
EUCLID R 32
SOFORT VERKAUFEN
bei Europas Marktführer ab 0,79 € pro Inserat.
Jetzt Informieren


Tel: +49 (0) 201 857 86 112
oder sofort verkaufen
Jetzt Maschinensucher-App testen!
Maschinensucher-App für iPhone und Android.
Wollen Sie den Chat-Verlauf wirklich beenden?
Ja Nein
×
Maschinensucher-Chat
Name E-Mail Ihre Nachricht an den Händler
CHAT MIT HÄNDLER STARTEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Partner tippt gerade
NACHRICHT JETZT SENDEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Chat-Partner scheint inaktiv zu sein.
Chat Fenster Schließen