Motor

ADDA C200 LT/4

Zustand: sehr gut (gebraucht), Niedertemperatur Kessel,Buderus SB615 Leistung 510KW ,120Grad ,5,5Bar,Gas oder Ölbrenner möglich Kedpfx Ajqww Icef Dodi

Zustand: sehr gut (gebraucht), Baujahr: 2001, Druck: 13 bar, 1 gebr. Dampfkessel ----- Fabrikat : LOOS; Gunzenhausen Type : U-HD Heizfläche ca. : 31 qm Leistung max. : 2.000 kg/h höchstzul. Betriebsüberdruck : 13,0 bar erhöhter Prüfdruck : 23,4 bar Wasserinhalt bei NW ca. : 1.740 l Wasserinhalt voll ca. : 2.480 l Kdjdpfowub Hbsx Af Dei Baujahr : 2001 ausgerüstet mit Weishaupt Gasbrenner, Gasregelstrecke, Schaltschrank, Speisewasserpumpe, Wasserstandsschauglas, Dampf- und Sicherheitsventil und den vorhandenen groben und feinen Armaturen

Zustand: gut (gebraucht), Drehstrommotor, Elektromotor Kodpfxsd E Tfno Af Dsdi -Leistung: 5,5/8/22 kW -Drehzahl: 740/975/1475 U/min -Welle: Ø 55 mm -Bauform: B3 -Schutzart: IP 33 -Abmessungen: 750/510/H390 mm -Gewicht: 275 kg

Zustand: neu, Maschinen-/Fahrzeugnummer: 82310001, Leergewicht: 9.500 kg, maximales Ladegewicht: 29.500 kg, Gesamtgewicht: 39.000 kg, Achsen-Konfiguration: 3 Achsen, Laderaumlänge: 13.650 mm, Laderaumbreite: 2.500 mm, Laderaumhöhe: 4.000 mm, Federung: Luft, Reifengröße: 385/65r22,5, Farbe: Sonstige, Baujahr: 2026, Ausstattung: ABS, Ladebordwand, Neuer BERDEX Schweinetransporter mit 3 Ebenen. * Klappböden Kdsdpfx Askmf Uiof Dji * Ladeaufzug * 3 nicht gelenkte Achsen * Kann mit Typ-2-Ausstattung für Langstreckentransporte ausgerüstet werden * Falt-Hubdach * 101 m²

Baujahr: 1970, Zustand: gut (gebraucht), Funktionsfähigkeit: voll funktionsfähig, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon ) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm ) Width of saw pulley face-optional 5 1/2" (140mm ) Maximum width of saw-standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Kdsdpfx Afevuhume Dsi Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9,1" ( 2770mm ) Overall width 8,1" ( 2460mm ) Speed of saw pulleys,r.p.m. 8,000( 2440m/min ) Horse-power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42,6m) Shipping Specification : Standard Machine : Nett weight, lbs. 3583 Kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator-fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planing mill and joinery shops. The thin bandsaw gives the machine a high timber- recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work General The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw-speed of 8,000 feet permin . (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop-button which is fitted to the machine base close to the sawyer's position. horizontal Rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Zustand: gut (gebraucht), Riello Ölbrenner 482M1,Leistung 2370Kw,220kg/h Kedpfx Ajpir Ryef Dsdi

Zustand: gut (gebraucht), Weishaupt Ölbrenner L9T-320kg/h Kdsdpspiqtcjfx Af Dji

Zustand: gebraucht, Baujahr: 2001, Funktionsfähigkeit: voll funktionsfähig, 1600 kVA Öl/Hermetik-Transformator, Pauwels, Baujahr 2001, 21kV/0,69, Schaltgruppe Dyn5, OS-Steckdurchführungen, US-Porzellandurchführungen, Optional: Zeigerthermometer, Hermetik Vollschutz, Rollen, Anschlussfahnen Kodpfx Aexwa S Ejf Djdi

Zustand: gut (gebraucht), Riello RLS50 Öl+Gasbrenner 581kw ca.15kg/h Kjdpfx Afepiqias Dsdi

Zustand: gebraucht, Maschinen-/Fahrzeugnummer: 13164, 1-Spindel-Papierbohrmaschine - 1-head spindle paper drilling Nagel Citiborma 150Serial-No. 7404 Online-Video-Inspection by Skype-Video Kjdpfx Aoh Aw Ugef Djdi We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test