M a n 27403 gebraucht kaufen

Erkannter Standort: Ashburn (US) (anpassen)
Adresse angeben
oder
verschieben
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Sroowc Twin 63"" (1,600 mm) x 63"" (1,600 mm) moving tables, heavy duty fixed bridge design in a left-to-right configuration; tables can operate independently for unload/load on one while the other is in process or locked together as one table to machine 5' x 10' material. -- Equipped with: Spindle #1 - 7.5 kW (10 HP) router, spindle with a 8-station tool changer #2 - 5.5 kW (7.5 HP) horizontal router, and spindle #3 - 7.5 kW (10 HP) QTC router; all spindl... mehr
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Jccwxc7 LAGUNA SMART SHOP 4 X 8 Single spindle:48"" x 96"" Y- and X-axis travel and 6"" Z-axis travel; 900 IPM rapid travel with 600 IPM maximum cutting speed by stepper motor ; 7-1/4"" clearance under gantry. -- Heavy-duty Welded tubular steel frame (2,600 Lbs approx. machine weight); 6-zone vacuum table with T-stots. -- 20 mm Heavy-duty HiWin Series linear bearings and rails on all axes. “Helical” rack-and-pinion drives on “X”... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. F30gnsaii COSMEC ""Conquest 515"" with ATC and Boring:Note: The machine will be available around the Mid-April!(5 X 15) 63"" x 180"" fixed table, moving gantry design in a front-to-back configuration; 2-zone Phenolic vacuum table with pop-up pins for part location. -- Equipped with: (1) 10.7 HP HSK Type ATC spindle, 8-position front-mount tool carousel, variable spindle speed from 800 - 18,000 RPM. -- Boring Unit: (1) 11-Spindle boring block (7 vertical ... mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Fzxmmwuuw MULTICAM 3000 SERIES 3-204R with Tool Changer; 5' X 10' Table: 60"" x 120"" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 35 HP vacuum blower system .Equipped with: -- (1) 10 HP ""HSK"" spindle with 6-position static tool changer, variable speed by inverter up to 24,000 RPM. -- Full table coverage onX- & Y-axis, rack & pinion gantry drive with brushless Servo motors using integ... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ba3oagfl3u SCMI ROUTECH ERGON Twin tables 5 X 9 CNC Router; (2) Spindles each with ATC:(2) MOVING TABLES WITH A WORKING AREA FOR EACH TABLE 111"" (2,840MM) X-AXIS, 60"" (1,500MM) Y-AXIS AND 11.8"" (300MM) Z-AXIS Moving tables in a front-to-back configuration can operate independently for load/unload on one while the other is in process. -- Twin Tables: Aluminum grid table surface with a square grid pattern for fixturing of parts, grid pattern allows use o... mehr
1
Elect./Voltage: 220/240 V, 60 Cy, 3 Ph. Xbnleb0 BOSS - BS-510, Router with ATC:5' x 10' Stationary table, moving gantry machine in a front-to-back configuration with a 4-zone vacuum table. -- Equipped with:(1) 10 HP ""HSD"" Type ATC spindle, air cooled, variable spindle speed from 1,000 - 24,000 RPM, 8-station rear mount tool changer. -- Machine & Operator Control:""BOSS"" CNC Control WINDOWS 7 with 19"" color monitor, network compatible and with matching Servo amplifiers & AC Servo motors... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Eqbwewd (4) SII Lumber Dry Kilns new in 1996 still in-place, complete with the following components and features: -- Capacity per Chamber Unit with 4/4 lumber is 70,000 board feet or 280,000 board feet for all (4). Size each is 33' wide x 24' deep and 21' high. SII Control System with SIEMENS TI-545 PLC. -- (2) Gas-fired low pressure Steam Boilers, 152 HP each. New in 1996, Model # S45-509. Gross output is 55588 MBH, Steam flow 5,244 Lbs./Hr.. Firing rat... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Jtxoaa MIDWEST CS 5236 Countertop Saw ;For cutting off or mitering postformed tops. -- 5 HP - 3,400 RPM Main motor, 0.5 HP drive motor, variable feed speed from 0 - 45 FPM with 45 FPM fixed return speed. -- 16"" Blade dia. cap., 5-5/8"" depth of cut with build-down, 3/4"" max. build-down, and 4-7/8"" max. back splash height. -- 54"" Crosscut cap. at 90°, 50"" at 22-1/2°, 38"" cut at 45°, fixed miter positions for 90°, 45°, 22-1/2°. -- Equipped with: ... mehr
1
Elect./Voltage: 200-600 V, 50/60 Cy, 3 Ph Ssfh9s BIESSE ROVER 24 FT FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications: 4' x 10' ""Matrix"" grid phenolic surface table for ""Nested Base Manufacturing"". -- Working cap.:""X"" Axis is 122"" (3,100 mm), ""Y"" axis 49.2"" (1,250 mm), and ""Z"" axis stroke is 9.8"" (250 mm); max. material thickness of 6.1"" (155 mm). -- Positioning Speed:""X"" & ""Y"" Axis is 328 FPM (100 MPM), Z-axis 98 FPM (30 MPM); ""X"" axis uses a helical rack & pinio... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 9db9s3vh9 THERMWOOD C 40 4 X 8 CNC Router with ATC:4' x 8' (49"" x 97"") Moving table with a machined aluminum table, single-zone vacuum plenum. -- Equipped with:(1) HSD ES919A2P type ATC Spindle, 10.7 HP variable spindle speed from 3,000 - 24,000 RPM with a 3-position bar type tool holder for ISO 30 tooling. -- Features: High performance closed-loop SIEMENS AC Servo motors driving precision ball screws on all axes with feed speeds up to 1,200 IPM on the... mehr


m a n 27403
täglich

Neue Maschinen per Mail!

Informiert werden!
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 9kyrfd7xi MIDWEST AUTOMATION CS-5230 Countertop Saw (w/Routers) In-feed / Out-feed and Laser for cutting off or mitering postformed and/or coved tops. 5 HP - 3,400 RPM Main motor, 0.5 HP carriage drive motor, variable feed speed from 0 - 45 FPM with 45 FPM fixed return speed. -- Equipped with: 16"" Blade dia. cap., 5-5/8"" depth of cut with build-up; 3/4"" max. build-down and 4-7/8"" max. back splash height. -- 42"" Crosscut cap. at 90°, 38"" at 22-1/2°,... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dv0cwa THERMWOOD C 42 TURRET Twin Table Multi Spindle:Twin 5' x 5' worktables can operate independently for unload/load on one table while the other is in process, or together as (1) large 5' X 10' work area. Each table has a single zone vacuum plenum. -- 8-Position Rotary Turret Head #1-9hp #3-3hp #4-4hp #5-3hp #6-4hp #8- Has no tag, All motors are integrated into the revolving turret head; 15 KVA solid-state inverter controls the spindle speed that is va... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Baiu0gajaa MIDWEST CS 5236 Countertop Saw with Laser Light; -- For cutting off or mitering postformed tops. -- 5 HP - 3,400 RPM Main motor, 0.5 HP drive motor, variable feed speed from 0 - 45 FPM with 45 FPM fixed return speed. -- 16"" Blade dia. cap., 5-5/8"" depth of cut with build-down, 3/4"" max. build-down, and 4-7/8"" max. back splash height. -- 54"" Crosscut cap. at 90°, 50"" at 22-1/2°, 38"" cut at 45°, fixed miter positions for 90°, 45°, ... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Baohnvv99k [...] ONSRUD 145G12 CNC Router with ATC only 3,610 Hours:""PANEL PRO"" series, 5' 12' Table; Moving Gantry CNC Router with a 145"" x 61"" worktable; 11"" Z-axis stroke; machined table with (1) vacuum zone, cast iron moving gantry bridge and vertical supports. -- Equipped with:(1) 12.7 HP ""HSK-63F"" electrospindle, infinitely programmable spindle speeds up to 24,000 RPM, 12-position ATC rotary tool changer. -- Closed loop: Brushless AC Servo m... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ba3oapwrqv KOMO VR 510 MACH II CNC Router with ATC and Boring:60"" x 120"" Moving table, Heavy Duty fixed bridge machine, front-to-back configuration, 2"" thick solid cast aluminum ""Matrix"" table machined with a single vacuum zone, (4) pop-up pins for material location. -- Equipped with: (1) 16 HP, fan cooled COLOMBO, ""HSK-63F type ATC spindle, variable spindle speed from 6,000 - 24,000 RPM, with a 12-station tool carousel. -- Boring unit: (1) 11 spin... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbci0rie9q THERMWOOD CS 45-510 CNC Router with ATC:5' x 10' Moving Gantry with a machined aluminum table, single-zone acrylic vacuum plenum, and manual material stops around the table perimeter. -- Equipped with: (1) 10 HP HSD BT-30 Type spindle with 7-position rear mount wine rack ATC, variable spindle speed from 3,000 - 24,000 RPM. -- Features: High performance closed loop AC Servo motors driving precision ball screws on all axes with feed speeds up to... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. 8wmjwkjwx NYLE L1200S Dry Kiln Heating unit -- Complete packaged dehumidification drying system ready for installation into custom-built drying chamber. -- Designed to operate effectively at low humidity levels; can bring moisture content to as low as 6%; patented ""XDH"" Control System is housed in a corrosion resistant, epoxy coated aluminum cabinet and operates over a wider range of temperatures with greater efficiency than any dryer available. -- The ... mehr
1
Elect./Voltage: 110V, 60 Cy, 1 Ph. Nao9f RFS PROTECH PT-7 Radius/Arch Forming Clamp. Forms headers and radius mouldings for windows and doors utilizing patented technology that eliminates the traditional method of building and storing wooden forms. Specifications: -- 120"" Max. part length x 7"" max. width x 4-1/2"" max. part thickness. -- Frame size: 67"" wide x 122"" long x 29"" high. -- (2) Working zones: 60"" x 67"" each as the machine has been modified to utilize both sides of the t... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Lwxsb HENDRICK 20ZXGN1337 ATC-T6 CNC Router with ATC; 51"" X 145"" table in front to back configuration with phenolic vacuum ready table with 7.9"" (200 mm) of Z-stroke. Equipped with: -- (1) 12 HP Router spindle with an 6-position rotary tool changer mounted on the front. -- The spindle has ceramic bearings and is air cooled and manually grease lubricated to insure smooth operation and long life; solid-state frequency inverter for spindle speed control ... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bafxnao3os MULTICAM G-204 ""Graph-X-Cutter"" CNC Knife-Cutting Finishing System:5' X 10' Fixed table, moving gantry machine in a front-to-back configuration with a single zone vacuum table supported by a (1) Vacuum pump [...] Graph-X-Cutter Registers, Routes, and Cuts with Precision at High Speeds, -- Equipped with: (1) 0.4 HP 23,000 RPM spindle with a tool diameter of up to ¼” (6 mm). You can configure up to 2 tangential knife receivers. You ... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 9s3cfsi0d [...] ONSRUD - 122C12, [...] CNC Router with ATC:Twin 61"" x 61"" Moving tables can function independently for unload/load on one table while the other is in process or in tandem as a single 122"" x 61"" table. -- Each Table with:Universal type single-zone vacuum plenum for use with spoil board or pods and includes pop-up pins for panel registration . -- Equipped with:(1) COLOMBO 12 HP 4-Pole HSK spindle, variable speed to 24,000 RPM, and 12-po... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Gvcguo [...] ONSRUD 145G12D 5 x 12 CNC Router with ATC and Boring:""PANEL PRO"" series; Moving Gantry CNC Router with a 145"" x 61"" worktable; 11"" Z-axis stroke; machined table with (1) vacuum zone, cast iron moving gantry bridge and vertical supports. -- Equipped with:(1) 12.7 HP ""HSK-63F"" electrospindle, infinitely programmable spindle speeds up to 24,000 RPM, 12-position ATC rotary tool changer. -- Boring unit: (1) BENZ 9-spindle drill block (arra... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. U7fhouf [...] ONSRUD S-Series 98S18R CNC Router with ATC and Roller Hold-Down:""S"" Series Moving table CNC Router with: 49"" x 98"" table in a front-to-back configuration and axis travel of 98"" x 74"". Phenolic surface, machined universal grid vacuum table single vacuum zone with (3) pop-up positioning pins . -- Thermal heat treated:Stress relieved & normalized steel frame base & moving gantry bridge, vertical supports & Dual Drive 1,400 IPM machining sp... mehr
1
Elect./Voltage: 240/480/575 V, 60 Cy, 3Ph 2pwddy OMNITECH PAL 5 X 10 CNC Router with ATC & Boring:5' X 10' Stationary table, moving gantry machine in a front-to-back configuration with a single zone vacuum table, and (1) BECKER ""VFTL-250"" 10 HP vacuum pump. -- Equipped with:(1) 10 HP HSK-63F type ATC spindle, air cooled, variable spindle speed from 1,000 - 24,000 RPM, 8-station front mount tool carousel. -- Boring unit:(1) 9-Spindle vertical drill bank (4-X, 4-Y and 1-C); routing spindle... mehr
1
Elect./Voltage: 440 V, 60 CY, 3 Ph. Uw9efauwf AXYZ AUTOMATION 4012 CNC ROUTER (SINGLE SPINDLE):Moving gantry machine in a front-to-back configuration with stationary table. -- 57"" X 120"" process area; over 12"" Z axis movement and approximately 19"" gantry clearance max. speed 1,000 IPM; aluminum table has overhead vertical framework with clamping pistons built into the table on one end and hydraulics on the other end to provide overhead clamping of material. -- T-slot fixturing capabilit... mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. 82tzbs7uw This includes the CORDES STAIR-ROUTER MODEL ""40"" Automatic CNC Stair Stringer Router and CORDES WEDGIT MODEL 30 Automatic CNC Stair Wedge Cutter. - Both are sold together for one [...] STAIR-ROUT ""40"" Fully Automatic 3-1/2 Axis CNC Stair Stringer Router for trenching open and box stairs. Unit automatically cuts rise, run, and advances to the next board. This model was developed over (4) Generations of improvements. Basic Operation: -- Oper... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 2qrwea NORTHWOOD NW2-55-2 with twin tables & Multi-spindles with ATC:(2) 62"" x 62"" Moving tables, each machined table with (2) vacuum zones, Extra Heavy Duty fixed gantry bridge and moving table with 1-1/2"" thick cast aluminum machined work surface. -- Equipped with:(2) 18 HP Router spindles with programmable spindle speeds of 7,200 - 18,000 RPM and each with an 8-position Automatic Tool Changer. -- Closed loop: AC Servo drive system with precision g... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. 7cwjlupqz CULLMAN AUTOMATION End Trim Saw Feed trough -- End Trim Saw for counter tops. This saw will be placed in-line at the end of your existing counter top [...]: -- The saw carriage and guides will be mounted below the infeed table height and will be raised from under the counter top to cut from the nose position toward the backsplash. This saw will use your existing 16"" saw blade to cut across counter top widths of up to 60"" with a backsplash heigh... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Sse9s0 MECAL 304 ARIEL-3MMI/4 AXIS Heavy Duty 4-Axis Machining Center; 4-Axis CNC Router for processing composites, aluminum, and wood bar rails that require multi-axis contour motion, drilling & routing [...]: -- Equipped with Special: (8) Bar & rail table system with (8) clamping devices and (2) location pins. -- Spindle configuration: (1) 5.5 kW (7.15 HP) ISO-30, 4-pole, up to 18,000 RPM HSD spindle with right- & left-hand revolution, with a 7-pos... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Guv8rs NORTHWOOD CS-285 with Twin 5' X 8' Tables, ATC, Boring & Saw:Twin (2) 96” x 60” vacuum tables have a total of (12) pneumatic pop-up positioning stops; tables can be operated independently or as a single 194” x 60” table. -- Equipped with: (2) 15 HP HSD HSK spindles each with a 12-position tool carousel, programmable spindle speeds from 12,000 - 24,000 RPM; left spindle has 360° C-axis for rotation of aggregates head spacing ... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Ymghsqwqz BLACK BROTHERS - RPP 875-50, [...] Roller, Heavy Duty (Laminating);50"" Working width; 8-3/4"" dia. top & bottom rubber covered rolls, large elevator hand wheel adjusts lower roller to allow for material from 0"" - 4-1/2"" thick. -- Quick raise button lifts top roller to allow repositioning of material, down button returns roller to precise preset bonding position. Control bars on both sides allow operator to run, stop or reverse both rollsor... mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Uxgtpa0li SHODA MAXXIM 2-Head CNC Router;122"" x 63"" Moving table w/extra hard phenolic surface (122"" left/right). Single vacuum zone, Extra Heavy Duty fixed gantry bridge with double rectangular guide ways. Equipped with: -- (2) 16 HP Routers, programmable spindle speed 3,000 - 18,000 RPM (air/oil mist lubricated), powered by electronic AC inverter w/dynamic spindle braking. -- Each router has 8-position Automatic Tool Changer system for ""BT-30"" too... mehr
1
Elect./Voltage: 380-460 V, 60 Cy, 3 Ph. Wwao9rod Twin 87"" x 63"" tables with a center supported bridge operate independently only for loading/unloading on one while the other is in process. Each table has a phenolic grid vacuum plenum with multiple vacuum points for use with spoil boards or pods. -- Equipped with: (2) 13.6 HP ""ISO 30"" type ATC Spindles with 12-station catepillar style carousels capable of background tool changing, variable spindle speed from 1,000 to 18,000 RPM, and ceram... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. 9a0jdqc2m STEAM ENGINEERING Model ST302 Steam Generator manufactured for producing steam to be utilized in processes, not under pressure. The machine is direct-fired with water injection to be converted directly into steam. See photos for the drawing illustrating this process for a better understanding. The equipment comes complete with the following components and features: -- Fuel: Natural Gas (can convert to propane). -- [...] Min: 1.0 MM BTU/Hr. --... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. V7usn2c RIERGE NT DOOR CNC ROUTER (MULTIPLE SPINDLE): -- Specifications:Automatic Door Loading & Unloading System with automatic debris removal, conveyor, and Machine Center is ideal for mass production. -- The machine base & mobile gantry are electro-welded and rigged steel structures ensuring the rigidity and precision of this model. -- 3-Axis Machining Unit equipped with: (2) 5.5 kW (7.4 HP) ER/23 vertical spindles, max. 18,000 max RPM; (2) 3.3 kW (... mehr
1
Elect./Voltage: 240/480 V, 60 Cy, 3 Ph. Uxvklctmu (1) 120"" (3,050 mm) x 61"" (1,560 mm) Moving ""Lignostone"" table surface, table is machined with a 30 mm x 30 mm grid with threaded bushings in a 150 mm grid. -- Extra Heavy Duty fixed gantry bridge, X-axis travel is 141.7"" (3,600 mm), Y-axis is 62.9"" (1,600 mm), and Z-axis is 10"" (250 mm). -- Equipped with: (6) 10 HP (7.4 kW) Electro spindle routers with RH/LH programmable rotation, spindle speed of 1,000 - 18,000 RPM, with (6) ""pigg... mehr
1
Elect./Voltage: Cw00yrm3 Lumber Dry Kiln with a total capacity of 122,000 board feet and the following major components and features: -- (2) KATRES AFK 61,000 BD. Ft. aluminum link chambers, 45' wide X 80' long X 26' high. -- (8) 0.5 HP Bi-directional computer controlled circulation fans. -- (2) 10 HP BECKETT blowers. -- (2) NYLE HT 108 dehumidification drying systems with (2) 40 HP compressors each. -- (1) 40 BHP BOILERSMITH oil fired boiler and BOILERSMITH receiver pump. -- Thes... mehr
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Ymgg9olix BLACK BROTHERS RPP 875-56 Rolling Press56"" Working width, 8-3/4"" dia. rolls (60/65 durometer). -- Upper elevator opening 0"" - 4-1/2"" with opening indicator. -- 1.5 HP (30 FPM) Fixed speed motor drive. -- 8"" Dia. cylinders, 8,000 lbs. max. combined pressure. -- 3-1/3"" Dia. web path idler roll. -- Top only spring loaded infeed & outfeed rolls. -- NEMA 12 electrics. -- Complete with: Push button magnetic starter, safety guards,... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Fh3cbw2 CNC Auto-Motion XP26 Panel-Master MG 91220 XHDS CNC Router with (4) Axis & ATC: Large Format 9’ x 12’ 4-Axis Flat Table CNC Router, -- Specifications: Moving gantry, fixed table machine with Heavy gauge boxed tubular steel construction, Stress relieved and precision machined for mounting linear rails and rack.X-Axis: 108” (9’), rack & pinion drive, Y-Axis: 144&r... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbyrptj KOMO 508 MACH I with ATC and boring available in January 2017:60"" x 96"" Moving table design in a front-to-back configuration with a single zone vacuum table machined out of solid cast aluminum, (3) pop-up pins for material location; extra Heavy Duty fixed gantry bridge. -- Equipped with: (1) 12 HP ""BT-30"" Type ATC Colombo spindle, 8-position traveling tool carousel, variable speed from 6,000 - 18,000 RPM. -- Boring Unit:7 Vertical boring in ... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. 7zjf7w90n ANDI SELEXX Series ""BDT"" with ATC and Boring:4' x 8' Fixed table, moving gantry machine with a single-zone vacuum table. -- Equipped with:(1) 7.5 HP ISO-30 Type ATC spindle, air cooled, ceramic bearings, variable spindle speed from 1,000 - 18,000 RPM; 6-station automatic tool changer and 2 HP 6-spindle vertical drill bank (6 in Y). -- Axis stroke:1,800 mm in X, 2,880 mm in Y, and 200 mm in Z. -- Max. feed rate:50 MPM in X & Y, 10 MPM in Z. ... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 729w2toyy CMS PF 111 4 ATC (1) 120"" (3,050 mm) x 61.4"" (1,560 mm) moving table. -- Lignostone"" table surface with (1) vacuum zones table are machined with threaded bushings for use with clamps and fixtures . -- Extra Heavy Duty fixed gantry bridge, X-axis travel = 141.7"" (3,600 mm) (head along bridge), Y-axis = 63"" (1,600 mm) (table front to back), Z-axis = 9.84"" (250 mm). -- Equipped with: (4) 8KW 11 HP Electrospindle with RH/LH programmable ro... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ssneq0 THERMWOOD ""C 42"" Twin Table CNC Router with ATC. -- Dual 5' x 5' Moving tables in a front-to-back configuration. -- Equipped with: (1) 10 HP ATC spindle, variable spindle speed from 3,000 - 18,000 RPM, 4-position wine-rack tool changer. -- Features: High performance closed loop SIEMENS Servo motors driving precision ball screws on all axes, feed speeds up to 900 IPM on the X- & Y-axis and 600 IPM on the Z-axis. -- Guide way & ball screw bea... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Baiuqljpk9 KOMO VR 512 TG SOLUTION CNC Router with Tool Changer, Boring and Rake; only 5,100 hours.5' x 12' Moving gantry machine in front-to-back configuration, Phenolic vacuum table machined with a single zone vacuum table, (4) pop-up pins for material location. -- Equipped with:(1) 13.4 HP ""HSK-63F"" Type ATC Electro-spindle, variable spindle speed up to 24,000 RPM. 12-Station tool carousel and a 19-spindle drilling unit.X-Axis (gantry) motion is accom... mehr
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. 9fzivil32 NYLE Model HT-54, Kiln Package ready for your building and complete with the following main components and features: -- 24,000 to 80,000 Board Foot capacity. -- Evaporates 5400 pounds of water per day. -- NYLE Kiln Doors included. (Effective and convenient to install on a building you build or already have.) -- NYLE Circulation Fans. -- NYLE Controls. -- Operating Temp Range 80°F - 160°F (27°C - 71°C). -- 4/4 Green Pine 68% to 6% in approxi... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bayuo9va30 LIMTECH Centaurus Series Flat Table CNC Router with Tool Changer and Boring:5' x 10' Capacity, great for Nested Base Manufacturing or just about any type of 3-Axis work. Very solid, full function CNC Router with DELTA Industrial [...] travel range & feed speed: -- X-Axis 61"" (1,550 mm), Y-axis with 121"" (3,073 mm) and Z-axis 9.8"" (250 mm). -- Worktable: 61"" (1,550 mm) x 121"" (3,073 mm); includes (3) pop-up stops to aid in panel positionin... mehr
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Vsdk83 LAGUNA SMART SHOP II 4 X 8 with ATC:48"" x 96"" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table including manual controls. 48"" x 96"" x 9.5"" axis travel with 12"" clearance under the gantry, Speeds of 900 in/min rapid travel with 600 in/min maximum cutting speed. -- Equipped with: (1) 7.5 HP liquid cooled spindle with (ATC), 6,000 - 24,000 RPM Range, Ceramic Spindle Bearings supported by Automatic... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Baiuq8l0tb KOMO VR 510 MACH III 5 X 10' with ATC, C-Axis and Boring:Heavy Duty ""MACH III"" Model with 60"" x 120"" table, (4) parts location pins single vacuum zone, precision machined 2"" solid aluminum table, spoil board ready. -- Equipped with:(1) 16 HP HSK-63F type ATC spindle C-axis 360° rotation, variable speed 6,000 - 24,000 RPM, with a traveling 12-position front mounted tool carousel that allows loading-and-changing of [...]: Optional 20-spindle ... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Berrvize KOMO 508 MACH I 5 X 8 with ATC and boring:60"" x 96"" Moving table design in a front-to-back configuration with a single zone vacuum table machined out of solid cast aluminum, (3) pop-up pins for material location; extra Heavy Duty fixe d gantry bridge. -- Equipped with: (1) 16 HP ""BT-30"" Type ATC Colombo spindle, 8-position traveling tool carousel, variable speed from 6,000 - 18,000 RPM. -- Boring Unit:20 spindle with 14 Vertical boring with ... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Ycqansnh2 HEIAN NC 162 - MC 5-Axis CNC Machine:For high speed & precision routing/trimming/sizing wood and composite parts. -- (2) 63"" (1,600 mm) x 63"" Side-to-side, (1,600 mm) front-to-back, moving tables, fixed bridge style machining center; vacuum table. -- Equipped with: 5.5 kW (8 HP), BT 35 Type ATC spindle, variable speed from 2,000 - 18,000 RPM with 12-position tool carousel. -- FANUC ""160i"" CNC Control built-in Pentium PC with embedded Wind... mehr


m a n 27403
täglich

Neue Maschinen per Mail!

Informiert werden!

bis

bis

Suche verändern
M A N 27403
SOFORT VERKAUFEN
bei Europas Marktführer ab 0,79 € pro Inserat.
Jetzt Informieren


Tel: +49 (0) 201 857 86 112
oder sofort verkaufen
Jetzt Maschinensucher-App testen!
Maschinensucher-App für iPhone und Android.
Wollen Sie den Chat-Verlauf wirklich beenden?
Ja Nein
×
Maschinensucher-Chat
Name E-Mail Ihre Nachricht an den Händler
CHAT MIT HÄNDLER STARTEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Partner tippt gerade
NACHRICHT JETZT SENDEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Chat-Partner scheint inaktiv zu sein.
Chat Fenster Schließen