Cnc-fraesmaschine gebraucht kaufen

Erkannter Standort: Ashburn (US) (anpassen)
Adresse angeben
oder
verschieben
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bafxnao3os MULTICAM G-204 ""Graph-X-Cutter"" CNC Knife-Cutting Finishing System:5' X 10' Fixed table, moving gantry machine in a front-to-back configuration with a single zone vacuum table supported by a (1) Vacuum pump [...] Graph-X-Cutter Registers, Routes, and Cuts with Precision at High Speeds, -- Equipped with: (1) 0.4 HP 23,000 RPM spindle with a tool diameter of up to ¼” (6 mm). You can configure up to 2 tangential knife receivers. You ... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 7w7cy9n9c [...] ONSRUD - 144G10, [...] Router, 5' x 12' with ATC:Moving gantry CNC Router with a 144"" x 60"" worktable in a front-to-back configuration; machined Phenolic vacuum plenum with: (3) Zones; cast iron moving gantry bridge & vertical supports. -- Equipped with: (1) 10 HP ""ISO-30"" Type ATC Spindle with side mounted 8-position carousel and infinitely programmable spindle speeds from 0 - 18,000 RPM. -- Drive system:Closed loop brushless AC Serv... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ssneq0 THERMWOOD ""C 42"" Twin Table CNC Router with ATC. -- Dual 5' x 5' Moving tables in a front-to-back configuration. -- Equipped with: (1) 10 HP ATC spindle, variable spindle speed from 3,000 - 18,000 RPM, 4-position wine-rack tool changer. -- Features: High performance closed loop SIEMENS Servo motors driving precision ball screws on all axes, feed speeds up to 900 IPM on the X- & Y-axis and 600 IPM on the Z-axis. -- Guide way & ball screw bea... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Fh3cbw2 CNC Auto-Motion XP26 Panel-Master MG 91220 XHDS CNC Router with (4) Axis & ATC: Large Format 9’ x 12’ 4-Axis Flat Table CNC Router, -- Specifications: Moving gantry, fixed table machine with Heavy gauge boxed tubular steel construction, Stress relieved and precision machined for mounting linear rails and rack.X-Axis: 108” (9’), rack & pinion drive, Y-Axis: 144&r... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbyrptj KOMO 508 MACH I with ATC and boring available in January 2017:60"" x 96"" Moving table design in a front-to-back configuration with a single zone vacuum table machined out of solid cast aluminum, (3) pop-up pins for material location; extra Heavy Duty fixed gantry bridge. -- Equipped with: (1) 12 HP ""BT-30"" Type ATC Colombo spindle, 8-position traveling tool carousel, variable speed from 6,000 - 18,000 RPM. -- Boring Unit:7 Vertical boring in ... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Lwxsb HENDRICK 20ZXGN1337 ATC-T6 CNC Router with ATC; 51"" X 145"" table in front to back configuration with phenolic vacuum ready table with 7.9"" (200 mm) of Z-stroke. Equipped with: -- (1) 12 HP Router spindle with an 6-position rotary tool changer mounted on the front. -- The spindle has ceramic bearings and is air cooled and manually grease lubricated to insure smooth operation and long life; solid-state frequency inverter for spindle speed control ... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. 7zjf7w90n ANDI SELEXX Series ""BDT"" with ATC and Boring:4' x 8' Fixed table, moving gantry machine with a single-zone vacuum table. -- Equipped with:(1) 7.5 HP ISO-30 Type ATC spindle, air cooled, ceramic bearings, variable spindle speed from 1,000 - 18,000 RPM; 6-station automatic tool changer and 2 HP 6-spindle vertical drill bank (6 in Y). -- Axis stroke:1,800 mm in X, 2,880 mm in Y, and 200 mm in Z. -- Max. feed rate:50 MPM in X & Y, 10 MPM in Z. ... mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Uxgtpa0li SHODA MAXXIM 2-Head CNC Router;122"" x 63"" Moving table w/extra hard phenolic surface (122"" left/right). Single vacuum zone, Extra Heavy Duty fixed gantry bridge with double rectangular guide ways. Equipped with: -- (2) 16 HP Routers, programmable spindle speed 3,000 - 18,000 RPM (air/oil mist lubricated), powered by electronic AC inverter w/dynamic spindle braking. -- Each router has 8-position Automatic Tool Changer system for ""BT-30"" too... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Baiuqljpk9 KOMO VR 512 TG SOLUTION CNC Router with Tool Changer, Boring and Rake; only 5,100 hours.5' x 12' Moving gantry machine in front-to-back configuration, Phenolic vacuum table machined with a single zone vacuum table, (4) pop-up pins for material location. -- Equipped with:(1) 13.4 HP ""HSK-63F"" Type ATC Electro-spindle, variable spindle speed up to 24,000 RPM. 12-Station tool carousel and a 19-spindle drilling unit.X-Axis (gantry) motion is accom... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Berrvize KOMO 508 MACH I 5 X 8 with ATC and boring:60"" x 96"" Moving table design in a front-to-back configuration with a single zone vacuum table machined out of solid cast aluminum, (3) pop-up pins for material location; extra Heavy Duty fixe d gantry bridge. -- Equipped with: (1) 16 HP ""BT-30"" Type ATC Colombo spindle, 8-position traveling tool carousel, variable speed from 6,000 - 18,000 RPM. -- Boring Unit:20 spindle with 14 Vertical boring with ... mehr


cnc-fraesm...
täglich

Neue Maschinen per Mail!

Informiert werden!
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bayuo9va30 LIMTECH Centaurus Series Flat Table CNC Router with Tool Changer and Boring:5' x 10' Capacity, great for Nested Base Manufacturing or just about any type of 3-Axis work. Very solid, full function CNC Router with DELTA Industrial [...] travel range & feed speed: -- X-Axis 61"" (1,550 mm), Y-axis with 121"" (3,073 mm) and Z-axis 9.8"" (250 mm). -- Worktable: 61"" (1,550 mm) x 121"" (3,073 mm); includes (3) pop-up stops to aid in panel positionin... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bj2nlh7o CMS PK 4800 TUCU 5-Axis CNC Router with Tool Changer;A very versatile 5-Axis CNC Machine for routing, sizing, milling, trimming & boring of composite or wood parts. -- Steel bar table with threaded holes for attaching fixtures and vacuum jigs; moving bridge style machining center; moving bridge style machining center. -- Axis strokes & quick positioning speeds: X-axis is 188.9"" (4,800 mm) at 177 FPM (54 MPM), Y-axis is 64.9"" (1,650 mm) at 177 ... mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Belsbv0q MULTICAM 3000 SERIES 3-204R 5 X 10 with Multi spindles:60"" x 120"" Fixed table, moving gantry machine in a front-to-back configuration with a 4 zone vacuum table supported by a (1) 17 HP vacuum system . -- Equipped with:(2) ""PERSKE"" 4 HP wench type spindles using ER35 collets up to 5/8"" with variable speed by inverter from 4,000 up to 24,000 RPM. -- Full table coverage:On X- & Y-axis, rack & pinion gantry drive with brushless Servo motors u... mehr
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Hueytovh COMEVA MEX VI 13/26 (4-Axis) 4' X 8' with Dual Spindle (opposed) & Boring: The ""Dual Spindle"" 4th Axis CNC Router makes this one of the most versatile CNC Routers in its class and price range. -- (1,300 mm X 2,600 mm) 4’ X 8’ Phenolic vacuum table with (6) independent vacuum zones and material reference pop up pins. -- All axis run on HIWIN rails with SCHNEIDER servos and contactors -- Spindle: (1) 2.2 Kw (3 HP) with speeds o... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Beyfiwl AXIOM - AC-510, [...] Table CNC Router with Tool Changer.5' x 10' Flat Table CNC Router, great for ""Nested Base Manufacturing"" or just about any type of 3-Axis [...] Bed/Base: -- The ""Stacked Design"" welded structurally engineered machine base provides a solid foundation for superior cut quality; the entire frame is stress relieved and heat treated. -- The Moving Gantry Bridge travels on ""HIWIN"" 1.2"" (30 mm) thick hardened & precision grou... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. V7usn2c RIERGE NT DOOR CNC ROUTER (MULTIPLE SPINDLE): -- Specifications:Automatic Door Loading & Unloading System with automatic debris removal, conveyor, and Machine Center is ideal for mass production. -- The machine base & mobile gantry are electro-welded and rigged steel structures ensuring the rigidity and precision of this model. -- 3-Axis Machining Unit equipped with: (2) 5.5 kW (7.4 HP) ER/23 vertical spindles, max. 18,000 max RPM; (2) 3.3 kW (... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. M0kl7 THERMWOOD C 40 4 X 8 CNC Router Single spindle & (2) drill chucks:4' x 8' (49"" x 97"") Moving table with a machined aluminum table, single-zone vacuum plenum. -- Equipped with:(1) 10 HP wrench type Spindle, variable spindle speed from 3,000 - 18,000 RPM also (2) dills . -- Features: High performance closed-loop SIEMENS AC Servo motors driving precision ball screws on all axes with feed speeds up to 1,200 IPM on the X- & Y-axis and 600 IPM on the ... mehr
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Vsdk83 LAGUNA SMART SHOP II 4 X 8 with ATC:48"" x 96"" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table including manual controls. 48"" x 96"" x 9.5"" axis travel with 12"" clearance under the gantry, Speeds of 900 in/min rapid travel with 600 in/min maximum cutting speed. -- Equipped with: (1) 7.5 HP liquid cooled spindle with (ATC), 6,000 - 24,000 RPM Range, Ceramic Spindle Bearings supported by Automatic... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Baiuq8l0tb KOMO VR 510 MACH III 5 X 10' with ATC, C-Axis and Boring:Heavy Duty ""MACH III"" Model with 60"" x 120"" table, (4) parts location pins single vacuum zone, precision machined 2"" solid aluminum table, spoil board ready. -- Equipped with:(1) 16 HP HSK-63F type ATC spindle C-axis 360° rotation, variable speed 6,000 - 24,000 RPM, with a traveling 12-position front mounted tool carousel that allows loading-and-changing of [...]: Optional 20-spindle ... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ba3oagfl3u SCMI ROUTECH ERGON Twin tables 5 X 9 CNC Router; (2) Spindles each with ATC:(2) MOVING TABLES WITH A WORKING AREA FOR EACH TABLE 111"" (2,840MM) X-AXIS, 60"" (1,500MM) Y-AXIS AND 11.8"" (300MM) Z-AXIS Moving tables in a front-to-back configuration can operate independently for load/unload on one while the other is in process. -- Twin Tables: Aluminum grid table surface with a square grid pattern for fixturing of parts, grid pattern allows use o... mehr
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Fzxmmwuuw MULTICAM 3000 SERIES 3-204R with Tool Changer; 5' X 10' Table: 60"" x 120"" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 35 HP vacuum blower system .Equipped with: -- (1) 10 HP ""HSK"" spindle with 6-position static tool changer, variable speed by inverter up to 24,000 RPM. -- Full table coverage onX- & Y-axis, rack & pinion gantry drive with brushless Servo motors using integ... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. F30gnsaii COSMEC ""Conquest 515"" with ATC and Boring:Note: The machine will be available around the Mid-April!(5 X 15) 63"" x 180"" fixed table, moving gantry design in a front-to-back configuration; 2-zone Phenolic vacuum table with pop-up pins for part location. -- Equipped with: (1) 10.7 HP HSK Type ATC spindle, 8-position front-mount tool carousel, variable spindle speed from 800 - 18,000 RPM. -- Boring Unit: (1) 11-Spindle boring block (7 vertical ... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Sroowc Twin 63"" (1,600 mm) x 63"" (1,600 mm) moving tables, heavy duty fixed bridge design in a left-to-right configuration; tables can operate independently for unload/load on one while the other is in process or locked together as one table to machine 5' x 10' material. -- Equipped with: Spindle #1 - 7.5 kW (10 HP) router, spindle with a 8-station tool changer #2 - 5.5 kW (7.5 HP) horizontal router, and spindle #3 - 7.5 kW (10 HP) QTC router; all spindl... mehr
1
Elect./Voltage: 240/480 V, 60 Cy, 3 Ph. Uxvklctmu (1) 120"" (3,050 mm) x 61"" (1,560 mm) Moving ""Lignostone"" table surface, table is machined with a 30 mm x 30 mm grid with threaded bushings in a 150 mm grid. -- Extra Heavy Duty fixed gantry bridge, X-axis travel is 141.7"" (3,600 mm), Y-axis is 62.9"" (1,600 mm), and Z-axis is 10"" (250 mm). -- Equipped with: (6) 10 HP (7.4 kW) Electro spindle routers with RH/LH programmable rotation, spindle speed of 1,000 - 18,000 RPM, with (6) ""pigg... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Guv8rs NORTHWOOD CS-285 with Twin 5' X 8' Tables, ATC, Boring & Saw:Twin (2) 96” x 60” vacuum tables have a total of (12) pneumatic pop-up positioning stops; tables can be operated independently or as a single 194” x 60” table. -- Equipped with: (2) 15 HP HSD HSK spindles each with a 12-position tool carousel, programmable spindle speeds from 12,000 - 24,000 RPM; left spindle has 360° C-axis for rotation of aggregates head spacing ... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Sse9s0 MECAL 304 ARIEL-3MMI/4 AXIS Heavy Duty 4-Axis Machining Center; 4-Axis CNC Router for processing composites, aluminum, and wood bar rails that require multi-axis contour motion, drilling & routing [...]: -- Equipped with Special: (8) Bar & rail table system with (8) clamping devices and (2) location pins. -- Spindle configuration: (1) 5.5 kW (7.15 HP) ISO-30, 4-pole, up to 18,000 RPM HSD spindle with right- & left-hand revolution, with a 7-pos... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 2qrwea NORTHWOOD NW2-55-2 with twin tables & Multi-spindles with ATC:(2) 62"" x 62"" Moving tables, each machined table with (2) vacuum zones, Extra Heavy Duty fixed gantry bridge and moving table with 1-1/2"" thick cast aluminum machined work surface. -- Equipped with:(2) 18 HP Router spindles with programmable spindle speeds of 7,200 - 18,000 RPM and each with an 8-position Automatic Tool Changer. -- Closed loop: AC Servo drive system with precision g... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. U7fhouf [...] ONSRUD S-Series 98S18R CNC Router with ATC and Roller Hold-Down:""S"" Series Moving table CNC Router with: 49"" x 98"" table in a front-to-back configuration and axis travel of 98"" x 74"". Phenolic surface, machined universal grid vacuum table single vacuum zone with (3) pop-up positioning pins . -- Thermal heat treated:Stress relieved & normalized steel frame base & moving gantry bridge, vertical supports & Dual Drive 1,400 IPM machining sp... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Gvcguo [...] ONSRUD 145G12D 5 x 12 CNC Router with ATC and Boring:""PANEL PRO"" series; Moving Gantry CNC Router with a 145"" x 61"" worktable; 11"" Z-axis stroke; machined table with (1) vacuum zone, cast iron moving gantry bridge and vertical supports. -- Equipped with:(1) 12.7 HP ""HSK-63F"" electrospindle, infinitely programmable spindle speeds up to 24,000 RPM, 12-position ATC rotary tool changer. -- Boring unit: (1) BENZ 9-spindle drill block (arra... mehr
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Bav2fh0fnf CAM-WOOD WR 408 VAC ATC6 CNC Router; Material processing dimensions of 51"" x 98"" x 8"". -- Fixed 6-zone vacuum table:With vacuum pressure gauge. The factory installed vacuum table is designed for nested based panel processing. -- Moving gantry bridgeRides on high precision HIWIN linear rails for consistent movement and accurate cutting. -- Welded structuralSteel machine base provides a solid foundation for superior cut quality. -- Th... mehr
1
Elect./Voltage: 220/240 V, 60 Cy, 3 Ph. Xbnleb0 BOSS - BS-510, Router with ATC:5' x 10' Stationary table, moving gantry machine in a front-to-back configuration with a 4-zone vacuum table. -- Equipped with:(1) 10 HP ""HSD"" Type ATC spindle, air cooled, variable spindle speed from 1,000 - 24,000 RPM, 8-station rear mount tool changer. -- Machine & Operator Control:""BOSS"" CNC Control WINDOWS 7 with 19"" color monitor, network compatible and with matching Servo amplifiers & AC Servo motors... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 9s3cfsi0d [...] ONSRUD - 122C12, [...] CNC Router with ATC:Twin 61"" x 61"" Moving tables can function independently for unload/load on one table while the other is in process or in tandem as a single 122"" x 61"" table. -- Each Table with:Universal type single-zone vacuum plenum for use with spoil board or pods and includes pop-up pins for panel registration . -- Equipped with:(1) COLOMBO 12 HP 4-Pole HSK spindle, variable speed to 24,000 RPM, and 12-po... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 729w2toyy CMS PF 111 4 ATC (1) 120"" (3,050 mm) x 61.4"" (1,560 mm) moving table. -- Lignostone"" table surface with (1) vacuum zones table are machined with threaded bushings for use with clamps and fixtures . -- Extra Heavy Duty fixed gantry bridge, X-axis travel = 141.7"" (3,600 mm) (head along bridge), Y-axis = 63"" (1,600 mm) (table front to back), Z-axis = 9.84"" (250 mm). -- Equipped with: (4) 8KW 11 HP Electrospindle with RH/LH programmable ro... mehr
1
Elect./Voltage: 380-460 V, 60 Cy, 3 Ph. Wwao9rod Twin 87"" x 63"" tables with a center supported bridge operate independently only for loading/unloading on one while the other is in process. Each table has a phenolic grid vacuum plenum with multiple vacuum points for use with spoil boards or pods. -- Equipped with: (2) 13.6 HP ""ISO 30"" type ATC Spindles with 12-station catepillar style carousels capable of background tool changing, variable spindle speed from 1,000 to 18,000 RPM, and ceram... mehr
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Jccwxc7 LAGUNA SMART SHOP 4 X 8 Single spindle:48"" x 96"" Y- and X-axis travel and 6"" Z-axis travel; 900 IPM rapid travel with 600 IPM maximum cutting speed by stepper motor ; 7-1/4"" clearance under gantry. -- Heavy-duty Welded tubular steel frame (2,600 Lbs approx. machine weight); 6-zone vacuum table with T-stots. -- 20 mm Heavy-duty HiWin Series linear bearings and rails on all axes. “Helical” rack-and-pinion drives on “X”... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbci0rie9q THERMWOOD CS 45-510 CNC Router with ATC:5' x 10' Moving Gantry with a machined aluminum table, single-zone acrylic vacuum plenum, and manual material stops around the table perimeter. -- Equipped with: (1) 10 HP HSD BT-30 Type spindle with 7-position rear mount wine rack ATC, variable spindle speed from 3,000 - 24,000 RPM. -- Features: High performance closed loop AC Servo motors driving precision ball screws on all axes with feed speeds up to... mehr
1
Elect./Voltage: 240/480/575 V, 60 Cy, 3Ph 2pwddy OMNITECH PAL 5 X 10 CNC Router with ATC & Boring:5' X 10' Stationary table, moving gantry machine in a front-to-back configuration with a single zone vacuum table, and (1) BECKER ""VFTL-250"" 10 HP vacuum pump. -- Equipped with:(1) 10 HP HSK-63F type ATC spindle, air cooled, variable spindle speed from 1,000 - 24,000 RPM, 8-station front mount tool carousel. -- Boring unit:(1) 9-Spindle vertical drill bank (4-X, 4-Y and 1-C); routing spindle... mehr
1
Elect./Voltage: 440 V, 60 CY, 3 Ph. Uw9efauwf AXYZ AUTOMATION 4012 CNC ROUTER (SINGLE SPINDLE):Moving gantry machine in a front-to-back configuration with stationary table. -- 57"" X 120"" process area; over 12"" Z axis movement and approximately 19"" gantry clearance max. speed 1,000 IPM; aluminum table has overhead vertical framework with clamping pistons built into the table on one end and hydraulics on the other end to provide overhead clamping of material. -- T-slot fixturing capabilit... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Ycqansnh2 HEIAN NC 162 - MC 5-Axis CNC Machine:For high speed & precision routing/trimming/sizing wood and composite parts. -- (2) 63"" (1,600 mm) x 63"" Side-to-side, (1,600 mm) front-to-back, moving tables, fixed bridge style machining center; vacuum table. -- Equipped with: 5.5 kW (8 HP), BT 35 Type ATC spindle, variable speed from 2,000 - 18,000 RPM with 12-position tool carousel. -- FANUC ""160i"" CNC Control built-in Pentium PC with embedded Wind... mehr
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ba3oapwrqv KOMO VR 510 MACH II CNC Router with ATC and Boring:60"" x 120"" Moving table, Heavy Duty fixed bridge machine, front-to-back configuration, 2"" thick solid cast aluminum ""Matrix"" table machined with a single vacuum zone, (4) pop-up pins for material location. -- Equipped with: (1) 16 HP, fan cooled COLOMBO, ""HSK-63F type ATC spindle, variable spindle speed from 6,000 - 24,000 RPM, with a 12-station tool carousel. -- Boring unit: (1) 11 spin... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 9db9s3vh9 THERMWOOD C 40 4 X 8 CNC Router with ATC:4' x 8' (49"" x 97"") Moving table with a machined aluminum table, single-zone vacuum plenum. -- Equipped with:(1) HSD ES919A2P type ATC Spindle, 10.7 HP variable spindle speed from 3,000 - 24,000 RPM with a 3-position bar type tool holder for ISO 30 tooling. -- Features: High performance closed-loop SIEMENS AC Servo motors driving precision ball screws on all axes with feed speeds up to 1,200 IPM on the... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dv0cwa THERMWOOD C 42 TURRET Twin Table Multi Spindle:Twin 5' x 5' worktables can operate independently for unload/load on one table while the other is in process, or together as (1) large 5' X 10' work area. Each table has a single zone vacuum plenum. -- 8-Position Rotary Turret Head #1-9hp #3-3hp #4-4hp #5-3hp #6-4hp #8- Has no tag, All motors are integrated into the revolving turret head; 15 KVA solid-state inverter controls the spindle speed that is va... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Baohnvv99k [...] ONSRUD 145G12 CNC Router with ATC only 3,610 Hours:""PANEL PRO"" series, 5' 12' Table; Moving Gantry CNC Router with a 145"" x 61"" worktable; 11"" Z-axis stroke; machined table with (1) vacuum zone, cast iron moving gantry bridge and vertical supports. -- Equipped with:(1) 12.7 HP ""HSK-63F"" electrospindle, infinitely programmable spindle speeds up to 24,000 RPM, 12-position ATC rotary tool changer. -- Closed loop: Brushless AC Servo m... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Mtasvk NORTHWOOD NW-510-4 CNC Router with Multi Spindles:60"" x 120"" Moving table machine in a front-to-back configuration with a single-zone vacuum plenum machined out of 1-1/2"" thick aluminum. -- Equipped with:(4) 15 HP COLOMBO, collet spindles, Z axis stroke is 8"" with 13 "" clearance, programmable spindle speeds from 7,200 - 18,000 RPM spindle hours #1 6600 hrs, #2 2400 hrs, #3 1200 hrs, #4 6500 hrs. -- Closed loop:AC Servo drive system with preci... mehr
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. C7cqmkz0 BUTLER TE 3000 ELGAMILL CNC Horizontal & Vertical Milling Machine; Specifications: -- 47"" x 122"" Table, 40 HP spindle motor, 5"" spindle, CAT 50 tapered spindle. -- 118"" (X-Axis) Table travel, 54"" (Y-Axis) vertical head travel, and 49"" (Z-Axis) ram travel, 5° x 45° auto-indexing articulated spindle head. -- 0.03 To 196 IPM Feed rate in X-, Y- and Z-axis, 393 IPM rapid in X-,Y-, and Z-axis, 30 to 3,000 RPM spindle speed. Equipped with: -... mehr
1
Elect./Voltage: 2qv7f3 TRUMPF TRUBEND 5050 CNC Hydraulic Press Brake -- 55 tons. -- Overall bending length 50"". -- Between housings 41"". -- Maximum stroke 8.5"".Equipped With: -- TASC 6000 Control -- Trumpf safety system mehr
1
Elect./Voltage: 380 V, 50/60 Cy, 3 Ph. Uw9knjk00 MORBIDELLI AUTHOR 660/FMS BORING MACH. ( FEED THRU CNC W/ROUTING): -- Specifications:Over all axes stroke for the PTP heads; ""X"" axis 142.9"" (3,630 mm), ""Y"" axis 52.9"" (1,344 mm) overall & 26.4"" (672 mm) x 2 panels, ""Z"" axis stroke 4.5"" (115 mm);Max working dimensions for single-panel size is 122"" long x 51.1"" wide (3,100 mm x 1,300 mm); Max material thickness 1.6"" (40 mm), min material thickness 0.47"" (12 mm).Max. 2-panel size i... mehr
1
Elect./Voltage: Gus9hyr TRUMPF TRUMABEND C60 4-Axis CNC Hydraulic Press Brake -- Tonnage capacity 67 tons . -- Maximum bending length 82"". -- Distance between housings 69"". -- Stroke length (Y1/Y2-Axis) 8"". -- Throat depth 16.5"" . -- Open height, effective 13.4"". -- Bed width 3"" . -- Travel in X-Axis (back gauge in/out) 20"" . -- Travel in R-Axis (back gauge up/down) 13"". -- Stop range in X-Axis 28"" . -- Travel speed, X-Axis 827 IPM . -- Travel speed, R-Axis ... mehr
1
Elect./Voltage: 240 or 480 V, 60 Cy, 3 Ph 8couk9uxc TOYOKOKI HYB-175 8-Axis CNC Electro Hydraulic Press Brake -- Press force (ton) 175 -- Table length (mm) 3000 inch 118.00” -- Distance between frames (mm) 2550 ( inch) 100.39” -- Table width (mm) 190 (inch) 7.480” -- Open height (mm) 340 (inch) 13.385” -- Table height (mm) 910 (inch) 35.826” -- Depth (mm) 1585 (inch) 62.401” -- Throat depth (mm) 400 (inch) 15.748” -- Height from floor (mm) 30... mehr
1
Elect./Voltage: Myxpf TRUMPF TRUMABEND C110 Hydraulic CNC Press Brake -- Capacity 121 Ton -- Overall Bending Length 122.4 in -- Between Housing Length 105.9 in -- Stroke 7.87 in. -- Throat Depth 16.5 in. -- Rapid Approach Speed 3.94 IPS -- Pressing Speed 315 IPS -- Return Speed 3.15 IPS -- Approx. Weight 17,000 lbs -- Approx. Dims 142"" x 68"" x 95"" (l x w x h)Equipped with: -- Delem CNC Control -- X, Y1, Y2, and R Axis -- Manual Ram clamping System -- Manual Bed Crowni... mehr


cnc-fraesm...
täglich

Neue Maschinen per Mail!

Informiert werden!

bis

bis

Suche verändern
CNC-FRAESMASCHINE
SOFORT VERKAUFEN
bei Europas Marktführer ab 0,79 € pro Inserat.
Jetzt Informieren


Tel: +49 (0) 201 857 86 112
oder sofort verkaufen
Jetzt Maschinensucher-App testen!
Maschinensucher-App für iPhone und Android.
Wollen Sie den Chat-Verlauf wirklich beenden?
Ja Nein
×
Maschinensucher-Chat
Name E-Mail Ihre Nachricht an den Händler
CHAT MIT HÄNDLER STARTEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Partner tippt gerade
NACHRICHT JETZT SENDEN
  Sie chatten mit: 
  Ihr Ansprechpartner: 
  
Ihr Chat-Partner scheint inaktiv zu sein.
Chat Fenster Schließen