Cmi gebraucht kaufen

Erkannter Standort: Ashburn (US) (anpassen)
Adresse angeben
oder
verschieben
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ehddf8v SCMI K201 HFE SINGLE SIDED EDGE BANDER1/8" Max. edge cap., and 1-1/2" max. panel thickness; semi-automatic strip & coil feed magazine (manual single strip feed), Teflon coated glue pot w/fast (8) Minute heat-up time, 1.2 mm cap. guillotine. -- Workstations: Single motor front & rear end trim (0.8 HP - 10,000 RPM motor); top & bottom flush trims (0.8 HP - 27,000 RPM ea. motor), straight or 12° bevel cutters. -- Top & bottom buffing unit (0.25 HP -... mehr
2
Technische Daten: - max. Presskraft 200 t - max. Stoesselhub ca. 350 mm - Presszylinder links + rechts verfahrbar 8q2ggb3qo - Staenderweite ca. 1500 mm - Staendertiefe ca. 400 mm - Min. / max. Einbauhoehe ca. 250 / 900 mm - Hydr. Tischhoehenverstellung mit 3 Steckbolzenraster Abstand je 250 mm - Tischauflageplatte ca. 1480 x 700 mm - Antrieb 400 V / 4 kW - Platzbedarf ca. B 2400 x H 2600 x T 950 mm - Gewicht ca. 2500 kg mehr
4

Hammermühle VTR CMI HM600

Mortara (PV) - Italy Italien
6801 km
2012
GEBRAUCHT
Hammer Mühle Modell: VTR CMI HM600 Leistung: 400 kW-Elektromotor (600 PS) Laden von Gestell: 1200 X700 mm Arbeiten Länge: 1200 mm Rotordurchmesser: 1000 mm Rotor Gewicht: 11 Tonnen Rotordrehzahl: 700 u/min lol der Hammer: 12 Hammer-Gewicht: 65 kg Screening-Raster: quadratische Löcher 100 x 100 mm und 50 x 50 mm Costruction Jahr 2012 Magnettrommel Abmessungen 1000 x 1000 mm (DxL) Status: Running - in gutem Zustand Produktivität mit 100 x 100 Grid und Metall Schrott: 8-12 Tonnen/h E... mehr
5
NEUE Hydr. Werkstattpresse SICMI Typ PSS 150 Druckkraft 150 ton. Ständerweite 1500 mm Stößelhub 350 mm Ozoammqta Einbauhöhe max. 900 mm Fahrgeschwindigkeit 20 mm/sec. Pressgeschwindigkeit 3 mm/sec. Motorleistung 5,5 kW Netzanschluß 400 Volt, 50 Hz - Tisch höhenverstellbar über Steckbolzenraster und Kette über Zylinderrückhub - 2-Handsteuerung - 2 stufige Hydraulikpumpe (Umschaltung über Druck) - CE Kennzeichnung und sichere Bedienung nach UVV Platzbedarf L x B x H 220... mehr
4
wir bieten: aus Lagerbestandsaufloesung CMI Glastisch 140 x 80 x 75 cm Stahlrohrrahmen Sicherheisglas Rahmen: Stahlrohrgestell beschichtet Tiaschplatte aus Sicherheitsglas Farbe: siehe Foto Augstellmasse: 140 x 80 x 75 mit Steckloch fuer Sonnenschirm Gewicht: 23 kg Zustand: neuer unbenutzt Artikel, aus Lager, in Orginalverpackung, Verpackung mit Lagerspuren. 4 Stueck vorraetig. Eu9y2s3qa Hinweis zum angebotenen Artikel: Unser Haus verwertet Assets aus Aufloesungen und insolventen Unterneh... mehr
4

Preshredder CMI Preshredding

Pivka Slowenien
7126 km
2011
GEBRAUCHT
380 kW (510 PS) Yyeh3we0t Neue kniwes refurbished mehr
1
Elect./Voltage: Wzxmxmlgj SCMI BASIC 2 Single Sided Edgebander;Specifications: -- 5/16" (8 mm) Max. edge capacity. -- 140 mm (5-1/2") min. panel width and 200 mm (7-15/16") min. length. -- Automatic strip & coil feed magazine. -- Teflon coated glue pot (heat up time 10 Min). -- 1.2 mm cap. guillotine. -- 3-Roll pressure unit w/pneumatic [...]: -- Double motor front & rear end trim (0.3 HP - 12,000 RPM motor), tilts 0° - 15°. -- Top & Bottom flush trims (0.8 HP - 12.000 RPM motor), b... mehr
3
Messgeraet Coating measurement Hersteller: Oxford Su3p3qlku Typ: CMI 950 mehr
3

Doppel Welle Schredder VTR CMI 3000 Twister

Mortara (PV) - Italy Italien
6801 km
2011
GEBRAUCHT
Motor: Diesel Iveco Cursor13 Leistung: 380 kW (510 PS) Mxs2t Eröffnung Rahmen: 3500 x 2500 mm Kammer: 2000 X1600 mm Schleifen Blattstärke: 140 Jahr der Costruction: 2011 Produktion: 15-25 t/h Zustand: laufen-gute Bedingungen mehr
6

CMI-Shredder CMI CR 4000

Pivka Slowenien
7126 km
2004
GEBRAUCHT
Gebrauchte Preshredder CMI CR 4000 für Verfahren Karosserien, Ballen, etc., sehr starke Maschine!!! Crq9i9lc mehr


cmi
täglich

Neue Maschinen per Mail!

Informiert werden!
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Yvt932nr SCMI M3 Dip Chain Gang Rip Saw -- 11-7/8" x 4-3/4" Working capacity. -- Motor: 42 HP - 4,200 RPM motor, 70 mm dia. sleeve for 12" - 14" dia. saw blades, 4-3/4" max. depth of cut, 8-3/4" throat depth, 14" min. stock length. -- Equipped with: 2 HP Feed motor, variable feed drive, feed speed from 20 - 150 FPM, automatic chain lubrication, 60" x 30" table; (2) upper infeed & (2) upper outfeed rollers at 4" in dia., top & bottom anti-kickback fingers,... mehr
3

Schredder VTR CMI 4000

Mortara (PV) - Italy Italien
6801 km
2004
GEBRAUCHT
Motor: Diesel Iveco Cursor 13 Leistung: 380 kW (510 PS) Eröffnung Rahmen: 3500 x 2500 mm Yrg0mg Kammer: 2000 X1600 mm Schleifen Blattstärke: 120 mm Jahr der Costruction: 2004 Produktion: 15-25 t/h von Metallschrott Bedingungen: Messer in einem sehr schlechten Zustand mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 8t797mcp9 SCMI M3 Dip Chain Gang Rip Saw -- 11-7/8" x 4-3/4" Working capacity. -- Motor: 42 HP - 4,200 RPM motor, 70 mm dia. sleeve for 12" - 14" dia. saw blades, 4-3/4" max. depth of cut, 8-3/4" throat depth, 14" min. stock length. -- Equipped with: 2 HP Feed motor, variable feed drive, feed speed from 20 - 150 FPM, automatic chain lubrication, 60" x 30" table; (2) upper infeed & (2) upper outfeed rollers at 4" in dia., top & bottom anti-kickback finge... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ftz0qql SCMI SI 400 E Sliding Table Panel Saw with motorized adjustments. Sliding Table Panel Saw with Motorized Blade adjustments and powered Rip Fence [...]: -- 3,200 mm (126") Stroke length, anodized aluminum 14-1/4" wide sliding table, and 2-position table locks for easy panel loading in any position. -- 45° Tilting, 1" dia. main saw arbor, 400 mm (15.8") blade dia. cap., 130 mm (5") max. cut height 90° - 90 mm (3.1") 45°; 59" rip capacity. -- 9 ... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Mtyemc SCMI SI 16 W Sliding Table Panel Saw; 126" Cap. with scoring, 9 HP main and 1 HP scoring motors. -- Features: Tilting arbor 0° - 45°, 5-1/2" depth of cut with 15-3/4" blade dia.; 3,200 - 4,500 & 6,000 RPM arbor speed; 59" max. width to rip fence. -- Complete with: Telescoping crosscut fence with (2) large flip stops, mechanical work hold-down attachment, 2-position sliding table lock and push button magnetic controls. mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 3kleoc3wm SCMI SI 16 WA Sliding Table Panel Saw w/Tiger Rip Fence -- 133" (3400 mm) Sliding Table Cap., with scoring, 9 HP main and 1 HP scoring motors. -- Features: Tilting arbor 0° - 45°, 5-1/2" depth of cut with 15-3/4" blade dia.; 3,200 - 4,500 & 6,000 RPM arbor speed; 59" max. width to rip fence. -- Complete with: Telescoping crosscut fence with (2) large flip stops, mechanical work hold down attachment, 2-position sliding table lock, overhead b... mehr
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. 0hcp0kbp SCMI TOPSET XL 31 Moulder Feed Through - 6-Head B-R-L-T-T-B; Working capacity 9-5/8" x 4-11/16". -- Head sequence: Bottom 20 HP, right 10 HP, left 20 HP, top 25 HP, top 25 HP and bottom 15 HP motor. -- Spindle dia: 40mm at 6,000 RPM withdigital readouts on all spindles, top & outside left spindles with SCMI's patented setup system (the holddowns, chipbreakers, feed wheels, and outboard fence line automatically adjust to the cutting circle dia. o... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. H8gumml9 SCMI SANDYA 5 Single-Head 42" SanderSpecifications & features: 42" Cap., 12" min. material length; combination head contact roll & finishing platen. -- 5-1/2" Dia. contact roll, helicoidal grooved and 85 durometer; 2" wide finishing platen w/anti-dubbing device to prevent damages to leading & trailing edges of panels. -- Equipped with: 20 HP Main motor; 43" x 75" abrasive belts with electronic tracking; 1 HP variable feed drive, feed speed of 15... mehr
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. 00z7kjzwa SCMI ERGON Twin Table CNC Router with ATC:Very Special Deal - Excellent condition machine and we are offering this one for £29,800 Sterling (GBP)! ( or 34,220.00 Euros * )This machine has to be sold very fast, this is reflected in the price being 30% less than what one would normally pay for such a machine in such a good working order and [...] included in the price: The machine will be dismantled by qualified SCM CNC Engineers and loaded on to ... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Xjan8gn2 (51) Spindles, (3) heads with combination vertical and horizontal boring, great for construction hole and line boring. -- (1) Horizontal drilling unit with 21-spindle head and 2 HP - 2,850 RPM motor, (2) bottom vertical drilling units with 15-spindle heads each and (2) 3 HP - 2,850 RPM motors, vertical heads rotate 360° with pneumatic locking in 90° positions; spacing between vertical heads from 5-5/8" - 29-1/2". -- Complete with: Long back fenc... mehr
1

FLAT TABLE MACHINE (W/RAKE) SCMI ROUTECH RECORD 310

Charlotte, North Carolina Vereinigte Staaten von Amerika
521 km
2008
GEBRAUCHT
Elect./Voltage: 400/440 V, 50/60 Cy, 3 Ph. Fwygkj7 SCMI ROUTECH RECORD 310 FLAT TABLE MACHINE (W/RAKE): -- Specifications:6' x 12' Single Table machine: stationary extruded aluminum "MATRIX" table is machined with a square grid pattern for fixturing parts,Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested based machining". -- Working Field:"X" axis 144" (3,650 mm), "Y" axis 75.5" (1,920 mm) for routing & 55.5" for boring; "Z" a... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Wzxaz7kfb SCMI ROUTRON 912 single spindle & drill:"2-axis CNC with manual Z-axis ajustment". -- Equipped with(1) Head, 48" X 36" table size, (2) zone vacuum table, 10 HP router motor, 12,000 & 18,000 RPM variable spindle speed, # 2 Morse taper spindle; side mounted pneumtic drill with 3/8 Jacobs chuck. -- Full 2-axis control with DC motor drive table travel of 48" on X-axis, 36" on Y-axis, Z-axis with 11-3/4" travel; working feed speed 590 IPM and a "qui... mehr
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. 322wff0tj SCMI ROUTECH ERGON with TWIN TABLE & ATC: Available in August 2017(2) 102" x 85" (2,600 mm x 2,170 mm) Moving tables in a front-to-back operation - operate independently for load/unload on one while the other is in process, 11.8" (300 mm) Z-stroke. -- Features:"Power 2000" Electro Spindle Router w/ATC; aluminum grid table surface with a square grid pattern for fixturing of parts, grid pattern allows use of vacuum pods or closed cell rope gaske... mehr
1

SINGLE END TENONER SCMI CONCEPT 1000

Charlotte, North Carolina Vereinigte Staaten von Amerika
521 km
2004
GEBRAUCHT
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dvtueu SCMI CONCEPT 1000 Single End TenonerGeneral Specifications: -- (4) Machining Stations and PC Control! Left hand fixed with stations and right hand with 102" CNC controlled fence line, 24"infeed in front of holddowns. CNC Controlled Sizing fence opposite of the infeed fence allowing the operator to size parts exactly with a Single End. Approx. 100" Max width Cap.1st Station: --(1TRS): 2-head Tenoning Machining center. first head is a 1.8 kw, 3600 RP... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cqxctdppm 120" Cap., motorized opening with indicator, Stations with Jump score - Trim/hog - Top & bottom tenons. -- 6" Min. part width, approx. 12" infeed area in front of holddowns, manual thickness opening, upper driven holddowns, single post machine. -- Each side equipped with: -- 1st Station: Jump score saw, 1.5 HP motor. -- 2nd station Trim/hog saw , 5.5 HP motor, universal mount. -- 3rd Station: Jump cope universal mount with 6.5/5.5 HP moto... mehr
1

SINGLE END TENONER SCMI CONCEPT 1000

Charlotte, North Carolina Vereinigte Staaten von Amerika
521 km
2002
GEBRAUCHT
Elect./Voltage: 460V, 60 Cy, 3 Ph. Yqurtw SCMI CONCEPT 1000 Single End TenonerSCMI CONCEPT 1000 Single End Tenoner:General Specifications: -- (5) Machining Stations and PC Control! Left hand fixed with stations and right hand with 102" CNC controlled fence line, 24"infeed in front of holddowns. CNC Controlled Sizing fence opposite of the infeed fence allowing the operator to size parts exactly with a Single End. Approx. 100" Max width Cap.1st Station: --(1TRS): Cutting/hogging with scoring... mehr
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Uwzrk9fdn SCM Concept 2000 Double End Tenoner96" Cap., motorized opening with key pad and LED readout, 52" infeed area in front of holddowns, 0" to 7" motorized thickness opening with mechanical digital readout, upper driven holddowns w/individual motorized height adjustment, 37" pass line height, (3) post machinesEach side equipped with -•1st Station: Jump cope unit, 12 HP - 3,450 RPM motor, 40 mm dia. x 85 mm lg. spindle.• 2nd Station: High speed j... mehr
1

DOUBLE END TENONER (W/INSIDE TRACK MACHINING) SCMI D-80-K

Charlotte, North Carolina Vereinigte Staaten von Amerika
521 km
1985
GEBRAUCHT
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Y2vtem8s8 SCMI D 80K Double End Tenoner -- 126" Cap., motorized opening with "LED" indicator, 6" min. part width, 11" infeed area in front of hold downs, upper driven holddowns, (2) post machine, type 3B column [...] side equipped with: -- 1st Station: 9.6 HP tilting trim/hog unit -- 2nd Station: 9/11 HP dual speed high speed cope, 3,000/6,000 RPM, 4" tooling space cut outs in lower beam -- 3rd Station: 9/11 HP dual speed high speed cope, 3,000/6,000 RPM... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 2gig29u9d SCMI CYFLEX F900 CNC MACHINING CENTER (VERTICAL): -- Specifications:Flexible "Vertical" Machining Center that can reach movement speeds of 148 FPM (40 MPM) in "X" & "Y" axis & 49 FPM (15 MPM) in "Z" axis with total safety. -- Working field: Max. part size for "X" axis is 120" (3,050 mm), "Y" axis 35.4" (900 mm), max. part thickness 2.6" (60 mm). --Min part size for "X" axis is 7.8" (200 mm), "Y" axis 2.76" (70 mm), min. part thickness of .39"... mehr
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Srqdns SCMI PRATIX 48 NST FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:Single 4' x 8' stationary aluminum table, machined with a square grid pattern for fixturing parts. -- Working field:"X" Axis is 106" (2,690 mm), "Y" axis 51" (1,295 mm), "Z" axis stroke is 13.3" (340 mm); max. material clearance is 4.9" (124 mm). -- Positioning Speed:"X" & "Y" Axis is 246 FPM (75 MPM), "Z" axis is 98 FPM (30 MPM);.Closed loop AC Servo drive system driving pr... mehr
1

FLAT TABLE MACHINE (W/ATC/BORING) SCMI PRATIX 48 NST

Charlotte, North Carolina Vereinigte Staaten von Amerika
521 km
2004
GEBRAUCHT
Elect./Voltage: 400 V, 60 Cy, 3 Ph. Uw0yv0lxr SCMI PRATIX 48 NST FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:Single 4' x 8' stationary aluminum table, machined with a square grid pattern for fixturing parts. -- Working field:"X" Axis is 106" (2,690 mm), "Y" axis 51" (1,295 mm), "Z" axis stroke is 13.3" (340 mm); max. material clearance is 4.9" (124 mm). -- Positioning Speed:"X" & "Y" Axis is 246 FPM (75 MPM), "Z" axis is 98 FPM (30 MPM);.Closed loop AC Servo drive system driving... mehr
1

CNC MACHINING CENTER SCMI TECH 90 SUPER

Charlotte, North Carolina Vereinigte Staaten von Amerika
521 km
1995
GEBRAUCHT
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Mmnwh SCMI TECH 90 SUPER CNC MACHINING CENTER: -- Specifications: Working cap. "X" Axis 84.6" (2,150 mm), "Y" axis 31.5" (800 mm) when routing, "Z" axis stroke 7.8" (200 mm) max. material thickness 2.2" (54 mm). -- Positioning Speed:"X" & "Y" axis 245 FPM (75 MPM), "Z" axis 74 FPM (23 MPM); all movement by ball screw & lineal guides with brushless AC Servo drives. -- Worktable:(6) Adjustable panel supports, each support with (2) vacuum pods; (6) pneuma... mehr
1
Elect./Voltage: Ys7sk7rp SCM PRATIX S 22-31 B Flat Table CNC Router with ATC and Boring7' x 10' Nested Base Machine built for accuracy, speed and mass [...] Specifications: -- Working capacity: X-axis 122" (3,100 mm), Y-axis 86.6" (2,200 mm). -- Work area: Flat table design with matrix grid aluminum surface for Nested Base Manufacturing. -- Spindle: (1) 8.5 HP (6.6 kW) Air cooled Electro-spindle with max 24,000 RPM. Includes ATC system consisting of a rack type tool magazine with 13 posi... mehr
1

FLAT TABLE MACHINE (W/ATC/BORING) SCMI ROUTECH R 200

Charlotte, North Carolina Vereinigte Staaten von Amerika
521 km
1996
GEBRAUCHT
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. G7p9gvh SCMI ROUTECH R 200 KS PRT FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:3' x 10' Single Table machine: stationary extruded aluminum table is machined with a square grid pattern for fixturing parts,Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested based machining". -- Working Field"X" axis 126" (3,200 mm), "Y" axis 39.4" (1,000mm), "Z" axis stroke is 11.8" (300 mm), max ... mehr
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Xqxz0ktz ROUTECH (SCM) RECORD 250 CNC Router - (2) Spindles with ATC each, plus Boring; Twin 60" (1,524 mm) x 60" (1,524 mm) moving tables can operate independently for unload/load on one while the other is in process or together as a single 120" x 60" work area; each aluminum table is machined with a square grid pattern, which can accommodate flat spoil boards or pods. Equipped with: -- (2) 10 HP Air cooled, HSK-63F type ATC spindles, programmable spin... mehr
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Mmnxf SCMI ROUTECH ERGON CNC ROUTER (TWIN TABLE & MULTI SPINDLE):Twin Table in left-to-right configuration moving tables with a working area for each table 2,840mm X-axis, 1,500mm Y-axis and 300 Z-axis, aluminum grid table surface with a square grid pattern for fixturing of parts, grid pattern allows use of vacuum pods or closed cell rope gasketing for a 2-zone vacuum system. -- Equipped with: (2) 12-KW 16 HP electro-spindle routers with LH or RH rotatio... mehr
1

FLAT TABLE MACHINE (W/ATC/BORING) SCMI ROUTECH RECORD 125

Charlotte, North Carolina Vereinigte Staaten von Amerika
521 km
2003
GEBRAUCHT
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. 2qnkja SCMI ROUTECH RECORD 125 FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:5' x 10' Single Table machine: stationary extruded aluminum table is machined with a square grid pattern for fixturing parts,Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested based machining". -- Working field:"X" axis 125" (3,175 mm), “Y” axis 60” (1,524 mm) , "Z" axis stroke is 12" (305... mehr
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Bw7ttdi SCMI ROUTECH RECORD 110 FLAT TABLE MACHINE (W/ATC/BORING,"C" AXIS): -- Specifications:4' x 20' Single stationary extruded aluminum "MATRIX" table is machined with a square grid pattern for fixturing [...] pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested based machining". -- Travel Range:"X" axis 238" (6,050 mm), "Y" axis 71" (1,815 mm), "Z" axis stroke 17.3" (440 mm). -- Working fie... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 8epghwl9w SCMI OLIMPIC SE 215 SINGLE SIDED EDGEBANDER0.4 - 15mm (19/32") max. edge cap., 3mm PVC cap. 2" max. banding height, 2-3/8" min. panel width and 6-5/16" min. length. Teflon coated glue pot with glue roller application system; complete w/automatic recycling device for unused glue, quick melt, digital thermostat adjustment for temperature control. Workstations: -- 3-Roll pressure unit w/pneumatic controls for all pressure rollers. -- Double mot... mehr
1

EDGEBANDER (W/CORNER ROUNDING) SCMI OLIMPIC S 222

Charlotte, North Carolina Vereinigte Staaten von Amerika
521 km
2003
GEBRAUCHT
Elect./Voltage: 575 V, 60 Cy, 3 Ph. 73affl30i OLIMPIC S222 High Production Edge Bander with 3/4" thick cap , corner rounding and edge sander. -- General Specs: Edge thickness cap. 0.4 - 22 mm (7/8"), 0.4 - 3 mm PVC cap., min. working width 4-3/4"; Interchangeable Hot Melt glue application system with booster system for immediate heat up, and reverse glue applicator roller; guillotine for 3.5 mm PVC; pneumatically controlled pressure section with (1) large drive and (5) idle rollers, all inde... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ehdisz7 SCMI OLIMPIC S-212 EDGEBANDER WITH CORNER ROUNDING0.4 - 12 mm Edgebanding thickness, 10 - 55 mm Panel thickness, min. panel width 5", min. panel length 8", dual feed speed of 39 & 59 FPM. -- Automatic strip & coil feed magazine with 3 mm PVC guillotine, granular glue system, Teflon coated lower applicator glue pot; 1" Dia. glue applicator roller w/reversible rotation Pressure section; (1) Large dia. clutch controlled drive roller, (2) pneumatic pre... mehr
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Yqgac0 SCMI "S 212" [...]: Edge thickness cap. 0.4 - 12 mm (1/2"), 3 mm PVC cap., min. working width 4-3/4"; panel thickness 10 mm min. and 55 mm (2") maximum. -- Hot Melt glue application system with booster system for immediate heat-up, and reverse glue applicator roller; guillotine for 3 mm PVC. -- Pneumatically controlled pressure section with (1) large drive and (3) idle rollers, all independently controlled. -- SCMI S 212 Workstations: Double mot... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. P3bqjf SCMI, K 208-ERT-L Edgebander, ... with Pre-Mill & Corner RoundingBasic Specifications: --15/32" (12 mm) Max. edge cap., 2" max. (only 1-3/4" w/corner rounding) banding height, 2-3/8" min. panel width and 6-5/16" min. length. -- Equipped with: "RM-K" 2-Head Pre-milling station model (2.5 HP - 19,000 RPM motors ea.), automatic strip & coil feed magazine w/Heavy Duty 3 mm PVC cap. guillotine. -- Teflon-coated glue pot, glue roller application syste... mehr
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Fqdpw9zjs SCMI OLIMPIC S212 SINGLE SIDED EDGEBANDER0.4 - 12 mm (1/2"), 3 mm PVC cap., min. working width 4-3/4". Hot Melt glue application system with booster system for immediate heat-up, and reverse glue applicator roller. Guillotine for 3 mm PVC. Pneumatically controlled pressure section with (1) large drive and (3) idle rollers, all independently controlled. Workstations: Double motor end trim (1.3 HP - 12,000 RPM motor ea.), pneumatic adjustment for 0°... mehr
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Yj0nl3nom SCMI - Routech R 200, ...5-Axis CNC Router with Tool Changer.5,500 mm (216-1/2") X-Axis stroke, 1,300 mm ( 51.1") Y-axis stroke, 1,000 mm (39.37") Z-axis stroke, 5-Axis Machining Center with fixed table, moving bridge in a left-to-right configuration. -- Rotation on 4th axis (A-axis +/- 120°), rotation on 5th axis (C-axis +/- 310°). -- Rapid traverse X- & Y-axis at 60 MPM (196 FPM), Z-axis at 40 MPM (130 FPM), A-axis at 89°/Sec, C-axis at 14... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Cqfmmh8wa SCMI K 203-ER EDGEBANDER WITH CORNER ROUNDING13/64" (5 mm) Max. edge cap. (Optional upgrade 8 mm) for strip feeding, 1/8" (3 mm) for coil feeding; 65 mm min. panel width and 140 mm min. length, panel thickness 8 - 55 mm. -- Equipped with: Automatic strip & coil feed magazine, Teflon coated glue pot (heat-up time 10 Min), 3 mm cap. guillotine, 3-roll pressure unit w/pneumatic control. -- Workstations: Double motor front & rear end trim mounted o... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Gvah8g SCMI K 203-F SINGLE SIDED EDGEBANDER5/16" (7.9 mm) Max. edge cap. for strip feeding, 1/8" (3 mm) for coil feeding; 60 mm min. panel width and 160 mm min. panel length; panel thickness 10 - 50 mm. -- Equipped with: Teflon coated glue pot (heat-up time 10 Min), automatic strip and coil feed magazine, 3 mm cap. guillotine, 3-roll pressure unit w/pneumatic control. -- Workstations: Double motor front & rear end trim mounted on THK guideways (0.4 HP - ... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 8le03tp3s SCMI K 208E SINGLE SIDED EDGEBANDER5/16" (8 mm) Max. edge cap., 1-3/4" max. banding height, 2-3/8" min. panel width and 6-/14" min. length. Equipped with: Automatic strip & coil feed magazine, Teflon coated glue pot (heat up time 10 Min), upgraded to Heavy Duty 3 mm PVC cap. guillotine, 3-roll pressure unit w/pneumatic controls. 42 FPM Fixed feed speed via 1 HP [...]: -- Double motor front & rear end trim (0.3 HP - 12,000 RPM motor ea.), tilts 0... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 38p0gs8bs SCMI SYNTEX "S4S" Planer 4-Head (B-R-L-T), "S4S" Moulder, working cap. 7-1/16" x 4-5/16". -- Spindle sequence: Bottom 10 HP, 10 HP right/left heads and top 10 HP motor. -- Spindles: 40 mm dia. with cutterhead speed of 6,000 RPM; mechanical digital readouts for setting accuracy. -- Feed speed of 36 FPM, 1.5 HP feed drive. -- Equipped with: 67" Infeed straightening table with adjustable fence; Sound insulated safety hood. -- Dust collection ca... mehr
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Nbac2vyh SCMI SUPERSET 23 Moulder Feed Through -- 5-Head (B-R-L-T-B), working dimensions 9-1/16" x 4-3/4". -- Head sequence: Bottom 12 HP, right & left spindles 12 HP, top 18 HP and bottom 12 HP motor. -- Spindles dia. 1-13/16" with cutterhead speed of 6,000 RPM. SCMI Rapid setting system for left and top spindles. Mechanical digital readouts on all other spindle adjustments with the exception of the 1st bottom head. -- Feed motor 4.8 HP, variable feed sp... mehr


cmi
täglich

Neue Maschinen per Mail!

Informiert werden!

bis

bis

Suche verändern
CMI
SOFORT VERKAUFEN
bei Europas Marktführer ab 0,79 € pro Inserat.
Jetzt Informieren


Tel: +49 (0) 201 857 86 112
oder sofort verkaufen
Jetzt Maschinensucher-App testen!
Maschinensucher-App für iPhone und Android.