DATEN ZUR MASCHINE
SPRAYING SYSTEM (RECIPROCATING FEED THRU)
RSM (ROTARY SPRAY MACHINE)
(7-9) Like New 
PREIS UND STANDORT
DETAILS ZUM ANGEBOT
zuletzt am 21.09.2017
Elect./Voltage: 208-220/440V, 60 Cy, 3 Ph.
DUBOIS RSM Rotary Spray System (ideal for Flatline Coating for Siding); 66"" Width capacity, 68"" W Powered belt, 2 HP drive motor. -- (16) Rotary gun capacity (8 guns installed), 66"" x 90"" x 5"" spray area (approx). -- Equipped with: Automatic belt cleaning system, (2) NY Blower ""20PLR"" extraction fans. -- Spray pots, pumps, gauges and etc. included as [...] MachineFinishing Enclosure ● Painted and powder coated metallic cabin with 6 doors fitted with safety glass and safety interlock that stops rotation when doors are opened ● (4) Access and viewing door panels, two at each end ● (2) 4-Tube fluorescent light fixtures with bulbs sealed from cabin through safety glass ● UHMW polyethylene and stainless edging for the cabin for easy overspray cleanup ● Extraction fan through dry filtration and Air makeup fan delivering filtered air to the cabinRotating Carousel● (1) Rotating carousel equipped with (8) arms, powder coated for easy cleanup● Each arm is fitted with mounting system for (1) Automatic gun with adjustable angle pivot, multiple positions● Gun tracking plate which assures correct alignment of the guns across the entire arc over the parts● (1) Rotary seal with (3) chambers, two for the compressed air delivery and (1) for supplying the coating● 1 HP gear reduced motor driving the carousel, through timing belting, speed tracked by position sensor and speed calibrated by precision motion sensor● Adjustment of rotating speed via touch screen interface on control panel● Motorized height adjustment of the carousel including upper and lower travel limits via motor and gear reductionPneumatic Control● Air filtration and regulation on incoming shop compressed air● (8) Individual atomizing air controls mounted to the arms for convenient point of use adjustment● Compressed air supply to the control module mounted on the bottom of the carousel for triggering control of individual guns via electronic [...] Application Equipment● (8) Automatic spray guns with tip● (1) Piston Pump● Fluid supply and return hoses mounted to a free standing pump rack● All fluid fittings, regulators, back pressure valves, and pickup [...] Control● Master control panel with fused disconnect and safety interlock● Color touch screen with operator interface which includes manual triggering of guns, height adjustment, circuit selection and readout of conveyor speed. Also includes machine diagnostic system for fault detection and adjustment specifications● Photocell light curtain with receptor cells arranged linearly to allow for precise detection of parts being conveyed● SIEMENS PLC system to obtain position information from light bridge coupled with belt speed encoder which allows precise position information usedto trigger guns on and off where parts are located● Sensitivity adjustment to modify part detection window to compensate for gun triggering mechanical time● Sensors for relaying feed speed of components; relaying positions of the guns; relaying carousel speedConveyor● (1) Application specific Hybrid Polymer belt 68” wide with Polyurethane guides● (1) Adjustable take-up roll● (3) Fixed conveyor rolls● (6) Bearing return roll guides● (2) sets of (3) mini rolls for narrow pitch infeed and outfeed● AC motor with gear reductionCoating Recovery System● (1) Easily replaceable plastic scraper that is moved into the belt via air rams where it easily removes the oversprayed materials. These materials drain down the stainless support bar and drain into the pan● (1) Stainless drain pan with formed mouth for easy draining into a (1) gallon bucketConveyor Cleaning System● Stainless steel cleaning bath with attached rolls for easy extraction● Cleaning system is raised into place with (4) air cylinders mounted at the corners, it is lowered when the belting is not moving● Non marking sponge material for belt cleaning● Urethane material for belt wiping with UHMW support● Cleaning fluid is filtered and returned to the belt via fluid manifold with orifices. Fluid pump has quick disconnect for easy use to empty cleaning tank at cleanup and to add additional cleaning fluidControls● Free standing industrial control panel includes PLC controlled motor and process control● Touchscreen operator interface● SIEMENS PLC● Proface touchscreen● Manual Start/Stop control of conveyor roll cases● Flexible programming options for integration into existing systems.